ページ1に含まれる内容の要旨
Eng
Philips
Communication,
Security & Imaging
Installation Instructions
ページ2に含まれる内容の要旨
17. Servicing - Do not attempt to service this unit yourself as opening or IMPORTANT SAFEGUARDS removing covers may expose you to dangerous voltage or other hazards. 1. Read Instructions - All safety and operating instructions should be read Refer all servicing to qualified service personnel. before the unit is operated. 18. Damage Requiring Service - Unplug the unit from the outlet andrefer 2. Retain Instructions - The safety and operating instructions should be servicing to qualified service p
ページ3に含まれる内容の要旨
SAFETY PRECAUTIONS SECURITE CAUTION: TO REDUCE THE RISK OF DANGER : POUR ÉVITER TOUT RISQUE ELECTRICAL SHOCK, DO NOT OPEN D’ÉLECTROCUTION, VEUILLEZ NE PAS COVERS. NO USER SERVICEABLE PARTS OUVRIR LE BOÎTIER. IL N’Y A PAS DE INSIDE. REFER SERVICING TO QUALIFIED PIÈCES REMPLAÇABLES PAR L’UTILISATEUR SERVICE PERSONNEL. À L’INTÉRIEUR DU BOÎTIER. POUR TOUTE MAINTENANCE, VEUILLEZ VOUS ADRESSER The lightning flash with an arrowhead symbol within À UN TECHNICIEN SPÉCIALISÉ. an equilateral triangle is in
ページ4に含まれる内容の要旨
SICHERHEITSHINWEISE SEGURIDAD VORSICHT PRECAUCIÓN ELEKTRISCHE SPANNUNG. RIESGO DE DESCARGA ELÉCTRICA NICHT ÖFFNEN! ¡NO ABRIR! VORSICHT: DAS GEHÄUSE ZUR PRECAUCIÓN: PARA REDUCIR EL RIESGO VERMEIDUNG VON ELEKTRISCHEN DE DESCARGA ELÉCTRICA, NO ABRA LAS SCHLÄGEN NICHT ÖFFNEN. DAS GERÄT TAPAS. EN EL INTERIOR NO HAY NINGÚN ENTHÄLT KEINE VOM BENUTZER ZU COMPONENTE REPARABLE POR EL USUARIO. WARTENDEN TEILE. REPARATUREN NUR LAS REPARACIONES DEBE REALIZARLAS VON FACHPERSONAL AUSFÜHREN LASSEN. PERSONAL CU
ページ5に含まれる内容の要旨
VEILIGHEIDSMAATREGELEN SICUREZZA VOORZICHTIG ATTENZIONE GEVAAR VOOR ELEKTRISCHE SCHOK. PERICOLO DI SCOSSA ELETTRICA. NIET OPENEN! NON APRIRE. VOORZICHTIG: MAAK HET APPARAAT NIET ATTENZIONE: PER RIDURRE IL PERICOLO DI OPEN OM DE KANS OP ELEKTRISCHE SCOSSA ELETTRICA, NON APRIRE LE SCHOKKEN TE VERMIJDEN. BEVAT GEEN COPERTURE. L’INTERNO NON CONTIENE ONDERDELEN DIE DOOR DE GEBRUIKER COMPONENTI CHE L’UTENTE PUÒ MOETEN WORDEN ONDERHOUDEN. LAAT RIPARARE PERSONALMENTE. RIVOLGERSI AL ONDERHOUD EN REPARAT
ページ6に含まれる内容の要旨
´ MEDIDAS DE SEGURANÇA ZASADY BESPIECZE NSTAWA CUIDADO UWAGA RISCO DE CHOQUE ELÉCTRICO. NIEBEZPIECZEŃSTWO PORAŻENIA PRĄDEM NÃO ABRIR! ELEKTRYCZNYM. NIE OTWIERAĆ! CUIDADO: PARA REDUZIR O RISCO DE UWAGA: ZE WZGLĘDU NA CHOQUE ELÉCTRICO, NÃO ABRA AS TAM- NIEBEZPIECZEŃSTWO PORAŻENIA PRĄDEM PAS. O INTERIOR NÃO CONTÉM PEÇAS QUE NIE WOLNO OTWIERAĀ POKRYWY.W NECESSITEM DE MANUTENÇÃO.A ŚRODKU NIE MA ŻADNYCH ELEMENTÓW, MANUTENÇÃO DEVE SER EFECTUADA POR KTÓRE MOGĄ BYĀ NAPRAWIANE PRZEZ PESSOAL DE ASSISTÊNCI
ページ7に含まれる内容の要旨
TABLE OF CONTENTS 1PRODUCT DESCRIPTION ..............................................................................................................................8 1.1 Models ................................................................................................................................................................8 1.2 Features....................................................................................................................................................
ページ8に含まれる内容の要旨
1PRODUCT DESCRIPTION ™ ADIM is a powerful security and surveillance solution that combines the power and features of the Philips Allegiant matrix switcher with the speed and quality of digital video recording. This tightly integrated solution uses the IntuiKey keyboard to control all cameras, monitors and digital video recorders. With the push of a button, the DVR will playback video from the current camera and display it on the specified CCTV monitor. The joystick can be used to fast forward, f
ページ9に含まれる内容の要旨
Typical System: Back-up Recorder Allegiant Video Monitor Outputs Disk Array Loop-through PHILIPS ALLEGIANT Video Matrix Video Review Monitor Inputs Recorder PHILIPS PHILIPS PHILIPS PHILIPS Network Switch LAN ADIM Maximum of Network 6 Keyboards Serial Hub IMPORTANT NOTES: • Disk Arrays are optional. (See specific DVR for Disk Array may be a master in a satellite configuration, with DVRs at options.) both master and satellite sites. • Additional Serial Hubs may be used for remote keyboards
ページ10に含まれる内容の要旨
4.3 ADIM PC is pre-configured as follows: 4 ADIM CONNECTIONS AND CONFIGURATION Serial Hub’s PC COM Port Physical Port NOTE: The installer should be familiar with the Allegiant CCTV control system and Windows-based software, and have a general 1 5 knowledge of networking. 2 6 4.1 DVR Configuration (See DVR manual) 3 7 Configure each DVR with a unique IP address 4 8 • Ensure valid IP addresses are configured 5 9 • Set the DVRs recording parameters 6 10 • Ensure the Hi-Q’s password is set to 1234
ページ11に含まれる内容の要旨
MON A 29 4 3 2 1 ALLEGIANT Video Matrix PHILIPS Monitor Outputs 10 11 12 13 Figure 4.2 Figure 4.2 Shows the relationship of the Backup and Review 4.8 The PC is pre-configured with the following DVRs and Allegiant outputs to the DVR Configuration page of network parameters the ADIM. •IP address: 10.10.0.10 4.6 Network Connections • Subnet mask: 255.255.255.0 • Interconnect the Serial Hub(s). ADIM PC, DVRs and • Default Gateway: 10.10.0.1 network switches. Philips recommends that your IT depa
ページ12に含まれる内容の要旨
1. Select or create an Allegiant Server document. 5 ADIM CONFIGURATION The ADIM software is pre-loaded. No software installation is required. Open the ADIM Application by double clicking the ADIM icon on your desktop. 5.1 Logging ON and User Levels • Log in with a user name and password. NOTE: ADIM will automatically open the last Allegiant document, therefore this screen may not be seen. 2. If creating a new Allegiant document, select the type of • If configuring the system, logon as a user
ページ13に含まれる内容の要旨
4. If it is a new document, or if the Allegiant system is not on- NOTE: The green Allegiant On-line (in the lower right corner) line, select <>: indicates ADIM is properly communicating with the Allegiant. It may take up to 20 seconds for communication to be established. 6. Go to the DVR Configuration page to enter the values for each DVR. (See Section 6; Operation.) 6OPERATION Elements of the ADIM document window: Allegiant Document: Menu Bar Tool Bar
ページ14に含まれる内容の要旨
Items from DVR Configuration page NOTE for Allegiant model LTC 8500: • All Allegiants EXCEPT the LTC 8500 display the ADIM ITEM Explained Default messages on a third line above or below the two status lines. Identifies 1 to 800 Hi-Qs Not • The LTC 8500 does not have a third line for these messages, Hi-Q Number (Not changeable) applicable however, the messages can be set to overwrite the Monitor Title display. To do this the monitors must be set to IP address Hi-Q IP address 000.000.000.000 Monit
ページ15に含まれる内容の要旨
6.3 Status and Monitoring Page Table Element Explained Field Values Fixed field depending on where the Hi-Q Hi-Q number 1 - 800 is entered into the table Determines configuration of the Hi-Q in the Primary, Backup, Review Monitor Hi-Q Type system (See Appendix E for more details) Primary: Indicates operational status of a Hi-Q: On-Line (Green), On-Line and operational (Green); Off-Line (Red) Hi-Q Status Off-Line (Red); Backup: Back-up unit that is currently backing up Available (Green), Ba
ページ16に含まれる内容の要旨
Figure 6.3a Figure 6.3b NOTES: • New Log files are created daily upon the occurrence of the first event after 12:00am. Otherwise, new entries are appended to the existing log file upon starting the application. • Log files are easily manipulated into MS Excel or MS Access files for reporting. Use the TAB-delimited option to import into other databases. Figure 6.4a 6.4 Allegiant Camera Title Transfer Dialog Camera titles configured for your Allegiant may be transferred to the DVRs. Titles may be
ページ17に含まれる内容の要旨
SoftKey Display 7 ADIM KEYBOARD OPERATION Numeric 7.1 Product Menu SoftKey Descriptor Status Display Entry Cell To ensure that the IntuiKey Keyboard is properly connected Monitor Camera Allegiant to the ADIM system, press the Exit 1 1 MUX/DVR IntuiKey’s Product key. The ADIM ADIM On-Line softkey option Keyboard Control Prod Mon ^ Up Zoom (see Figure 7.1) will only be Clr Shot displayed if the IntuiKey < Left Right > Keyboard is properly connected v Down 1 2 3 and configured, and t
ページ18に含まれる内容の要旨
8TROUBLESHOOTING Problem Explanation / Resolution • Ensure that a null modem serial cable is connected between the IntuiKey keyboards and the serial hub. • Ensure that the appropriate communications port is properly configured for the serial hub. • Ensure that the serial hub is connected to the network switch with a straight-through Ethernet cable. Keyboards are not communicating with the ADIM • Ensure that the ADIM software computer is connected to the network switch with a straight-through
ページ19に含まれる内容の要旨
APPENDIX A – EVENT LOGS Log File Monitor Likely Source Event Component Entry Message of Error Info Component ID Log Message Type Type Primary or Review Primary or DVR #nnnn, IP Address: DVR Error! ADIM Software Error DVR Failure Hi-Q Failure Review Hi-Q XXX.XXX.XXX.XXX Primary or Review Primary or DVR #nnnn, IP Address: Hi-Q Disk Array DVR Error! Hi-Q Review Disk Error Disk Array Failure XXX.XXX.XXX.XXX Failure Array Backup Hi-Q DVR #nnnn, IP Address: BU DVR Error ADIM Software Backup Hi-Q Erro
ページ20に含まれる内容の要旨
APPENDIX A – EVENT LOGS (…continued) Log File Monitor Likely Source Event Component Entry Message of Error Info Component ID Log Message Type Type Allegiant On-Line ADIM Software Allegiant Allegiant Info Allegiant went On-Line Allegiant Off-Line ADIM Software Allegiant Allegiant Info Allegiant went Off-Line Voltage out of spec Hi-Q Low Power DVR #nnnn, IP Address: DVR Voltage Hi-Q Hi-Q Warning warning received from Supply Voltage XXX.XXX.XXX.XXX indicated Hi-Q Dark Alarm for indicated Logical C
