ページ1に含まれる内容の要旨
Isolated High-Speed Serial Port Powered
Serial Media Conversion Solution
RS-422/485 Connection USB Power Cord Package Checklist
Transio TCC-80I
First High-speed, Isolated, Self-powered
The RS-422/485 port to terminal block connector is If additional external power is required, TCC-80I • TCC-80I
RS-232 to RS-422, 2-wire/4-wire, RS-485
shown below. Note that some RS-422/485 devices can be connected to a standard 5 to 12 VDC power • USB Power Cord
are labeled “+” and “-” and
ページ2に含まれる内容の要旨
Optional External Power Switch and Jumper Settings Multiport Serial Boards Serial Device Servers Installation MOXA Smartio MOXA NPort Termination is a critical requirement for port-power To change the operation mode, check the DIP CP-118U 5110/5210 V2.1 Switch settings on the back panel. Serial (RS-232) Port Power devices such as the TCC-80I. In most circumstances, CP-168U V2 5410 V2.2 termination resistors are used when the RS-422/485 CP-104U V2 5610 V3.0 (or later) The RS-2
