ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
PCI-DIO24 24-bit, Logic-level Digital I/O Board User's Guide Document Revision 2, June, 2006 © Copyright 2006, Measurement Computing Corporation
ページ3に含まれる内容の要旨
Your new Measurement Computing product comes with a fantastic extra Management committed to your satisfaction! Refer to www.mccdaq.com/execteam.html for the names, titles, and contact information of each key executive at Measurement Computing. Thank you for choosing a Measurement Computing productand congratulations! You own the finest, and you can now enjoy the protection of the most comprehensive warranties and unmatched phone tech support. Its the embodiment of our two missions:
ページ4に含まれる内容の要旨
Trademark and Copyright Information TracerDAQ, Universal Library, InstaCal, Harsh Environment Warranty, Measurement Computing Corporation, and the Measurement Computing logo are either trademarks or registered trademarks of Measurement Computing Corporation. Windows, Microsoft, and Visual Studio are either trademarks or registered trademarks of Microsoft Corporation LabVIEW is a trademark of National Instruments. CompactFlash is a registered trademark of SanDisk Corporation. All other t
ページ5に含まれる内容の要旨
Table of Contents Preface About this User's Guide .......................................................................................................................v What you will learn from this user's guide.........................................................................................................v Conventions in this user's guide........................................................................................................................................ v Wh
ページ6に含まれる内容の要旨
Preface About this User's Guide What you will learn from this user's guide This user's guide explains how to install, configure, and use the PCI-DIO24 so that you get the most out of the digital I/O features. This user's guide also refers you to related documents available on our web site, and to technical support resources. Conventions in this user's guide For more information on
Text presented in a box signifies additional information and helpful hints related to the subject matt
ページ7に含まれる内容の要旨
Chapter 1 Introducing the PCI-DIO24 This manual explains how to install, configure and use the PCI-DIO24 digital I/O board. The PCI-DIO24 provides 24 lines of digital I/O. An on-board, industry standard 82C55 programmable peripheral interface chip provides the 24 digital I/O lines in three eight-bit ports (Port A, Port B, and Port C). Port C can be further divided into two four-bit ports (Port C-HI and Port C-LO). You can configure each port independently for either input or output. All
ページ8に含まれる内容の要旨
PCI-DIO24 User's Guide Introducing the PCI-DIO24 Software features For information on the features of InstaCal and the other software included with your PCI-DIO24, refer to the Quick Start Guide that shipped with your device. The Quick Start Guide is also available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf. Check www.mccdaq.com/download.htm for the latest software version or versions of the software supported under less commonly used operating systems. 1-2
ページ9に含まれる内容の要旨
Chapter 2 Installing the PCI-DIO24 What comes with your PCI-DIO24 shipment? The following items are shipped with the PCI-DIO24. Hardware ! PCI-DIO24 Additional documentation In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of the software you received with your PCI-DIO24 and information regarding installation of that software
ページ10に含まれる内容の要旨
PCI-DIO24 User's Guide Installing the PCI-DIO24 ! Signal termination and conditioning accessories MCC provides signal termination products for use with the PCI-DIO24. Refer to the "Field wiring and signal termination" section on page 2-4 for a complete list of compatible accessory products. Unpacking the PCI-DIO24 As with any electronic device, you should take care while handling to avoid damage from static electricity. Before removing the PCI-DIO24 from its packaging, ground yourself usin
ページ11に含まれる内容の要旨
PCI-DIO24 User's Guide Installing the PCI-DIO24 Connecting the board for I/O operations Connectors, cables main I/O connector Table 2-1 lists the board connector type, applicable cables, and compatible accessory products for the PCI- DIO24. Table 2-1. Board connectors, cables, and accessory equipment Connector type 37-pin D-type Compatible cables C37FF-x unshielded ribbon cable. x = length in feet. (see Figure 2-2) C37FFS-x cable shielded round cable. x = length in feet. (see Figure 2-3
ページ12に含まれる内容の要旨
PCI-DIO24 User's Guide Installing the PCI-DIO24 Information on signal connections General information regarding signal connection and configuration is available in the Guide to Signal Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf. Cabling The red stripe 1 1 identifies pin # 1 20 20 37 37 19 19 Figure 2-2. C37FF-x cable 1 1 20 20 37 37 19 19 Figure 2-3. C37FFS-x cable Field wiring and signal termination You can use the following MCC scr
ページ13に含まれる内容の要旨
PCI-DIO24 User's Guide Installing the PCI-DIO24 ! CIO-ERB08 Eight-channel electromechanical relay accessory for digital I/O boards. Details on this product are available on our web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=123&pf_id=241. ! CIO-SERB08 Eight Form C and ten socketed relay accessory for digital I/O boards. Details on this product are available on our web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=123&pf_id=680. ! CIO-ERB24 24-channel electro
ページ14に含まれる内容の要旨
Chapter 3 Programming and Developing Applications After following the installation instructions in Chapter 2, your board should now be installed and ready for use. Programming languages Measurement Computings Universal Library provides access to board functions from a variety of Windows programming languages. If you are planning to write programs, or would like to run the example programs for Visual Basic or any other language, please refer to the Universal Library User's Guide (ava
ページ15に含まれる内容の要旨
Chapter 4 Functional Details DIO signals All digital outputs and inputs on the PCI-DIO24 are CMOS TTL. Voltages and currents associated with external devices are usually far greater than can be supplied from a PCI-DIO24. Caution! Direct connections to high-current/high voltage devices will damage the board. The 82C55 digital I/O chip initializes all ports as inputs on power-up and reset. The state of the digital I/O lines is not defined as either logic high or logic low when in input m
ページ16に含まれる内容の要旨
PCI-DIO24 User's Guide Functional Details +5 VDC +5 VDC Dot indicates the 2.2 K SIP common line COM 2.2 K SIP HI HI n7 n7 n6 n6 n5 n5 Digital n4 n4 Digital I/O Port I/O Port n3 n3 n2 n2 n = A, B, or C n = A, B, or C n1 n1 n0 n0 COM LO LO (GND) (GND) Dot indicates the common line 2.2 K SIP installed for pull-up 2.2 K SIP installed for pull-down Figure 4-2. Pull-up and pull-down resistor SIP schematic When installed, the SIP establishes either a high or low logic level at each of the e
ページ17に含まれる内容の要旨
Chapter 5 Specifications Typical for 25 °C unless otherwise specified. Specifications in italic text are guaranteed by design. Power consumption Table 1. Power consumption specifications +5V operating 240 typical, 350 max Digital input / output Table 2. Digital input / output specifications Digital type 82C55 Configuration 2 banks of 8, 2 banks of 4, programmable by bank as input or output Number of channels 24 I/O Output high 3.7 volts min @ -2.5 mA Output low 0.4 volts max @ 2.
ページ18に含まれる内容の要旨
PCI-DIO24 User's Guide Specifications Main connector and pin out Table 4. Board connector, cables, and accessory equipment Connector type 37-pin D-type Compatible cables C37FF-x unshielded ribbon cable. x = length in feet. C37FFS-x cable shielded round cable. x = length in feet. Compatible accessory products (with SCB-37 the C37FF-x or C37FFS-x cable) CIO-MINI37 CIO-MINI37-VERT CIO-ERB08 CIO-SERB08 CIO-ERB24 CIO-SPADE50 SSR-RACK08 SSR-RACK24 Table 5. Connector pin out Pin Signa
ページ19に含まれる内容の要旨
Declaration of Conformity Manufacturer: Measurement Computing Corporation Address: 10 Commerce Way Suite 1008 Norton, MA 02766 USA Category: Electrical equipment for measurement, control and laboratory use. Measurement Computing Corporation declares under sole responsibility that the product PCI-DIO24 to which this declaration relates is in conformity with the relevant provisions of the following standards or other documents: EU EMC Directive 89/336/EEC: Electromagnetic Compat
ページ20に含まれる内容の要旨
Measurement Computing Corporation 10 Commerce Way Suite 1008 Norton, Massachusetts 02766 (508) 946-5100 Fax: (508) 946-9500 E-mail: info@mccdaq.com www.mccdaq.com
