ページ1に含まれる内容の要旨
RS-422/485 PCI Card
User Manual English
No. 51200 (2 Port)
No. 51202 (4 Port)
No. 51204 (8 Port)
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (Nov 2005)
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1.0 Introduction Thank you for purchasing the LINDY RS-422/485 Controller. This PCI serial card enables your computer to support serial RS-422/485 ports with 128Kbyte FIFO, Auto Identify and Switch RS-422/485 and ARSC™ technology. 2.0 Packing List Please check if the following items are present and in good condition upon opening the packaging. Contact your vendor if any items are damaged or missing. 1. Hardware: Serial Communication Board: LINDY PCI Host Controller × 1
ページ4に含まれる内容の要旨
3.0 Features 1. Fully compliant with PCI Specification Version 2.2 2. Supports both 64 Bit & 32 Bit PCI Bus and 3.3V & 5V connector keys. 3. High speed serial ports support baud rates of up to 921.6Kbps. 4. Provides a FIFO maximize size of 128Kbytes. The 128K FIFO can reduce CPU loading, improving system performance dramatically. 5. The unique Auto Switch RS-422/485 technology makes it easy and convenient to manage the device without the need for jumper or switch settings. 6. ARSC™ (
ページ5に含まれる内容の要旨
4.0 Specifications 4.1 Function Type LINDY Industrial Host Controller Mode of Operation Differential RS-422 Full-Duplex Bus Transceivers RS-485 Half-Duplex RS-422 1 Driver Drivers per Line RS-485 10 Drivers RS-422 10 Receivers Receivers per Line RS-485 32 Receivers 4.2 Hardware IC SUN1889 Controller UART (16C650 compatible) Bus Interface 64 Bit & 32 Bit PCI Bus, 3.3V & 5V connector keys 51200: 2 ports Number of Ports 51202: 4 ports 51204: 8 ports 51200: 2 x DB9 Male
ページ6に含まれる内容の要旨
4.4 Driver support Windows3.x/95/98SE/ME/NT/2000/XP/2003 Driver Support DOS, OS/2 , Linux 2.0.x / 2.2.x / 2.4.18 / 2.4.20 4.5 Dimensions 51200 120 × 80mm Dimensions (W × D) 51202 160 × 104mm (Std.Bracket:121mm) 51204 180 × 108mm 4.6 Regulatory Approvals Hardware CE, FCC Regulatory Approvals Software WHQL 4.8 System Requirements 1. Pentium or equivalent computer with an available PCI slot. 2. CD-ROM / DVD-ROM required for software installation. 3. Windows 3.x/ 95/98SE/Me/N
ページ7に含まれる内容の要旨
6.0 Pin Assignments & Cable Wiring The pin assignments of the DB9 and DB25 Male port are stated as below: Type DB9M DB25M Signal TxD- 1 8 TxD+ 2 3 RxD+ 3 2 RxD- 4 20 RS-422 RTS- 6 6 RTS+ 7 4 CTS+ 8 5 CTS- 9 22 GND 5 7 Type DB9M DB25M Signal Data+ 2 3 Data- 1 8 RTS- 6 6 RS-485 RTS+ 7 4 CTS+ 8 5 CTS- 9 22 GND 5 7 - 5 -
ページ8に含まれる内容の要旨
LINDY Serial Communication Boards have one DB37 female port for the 4 port version and one DB78 female port for the 8 port version. The pin assignments of the DB37 female port and the DB78 female port are shown below and on the following page. LINDY DB37 female 4 Port Serial Communication Boards Pin Assignment Port 1 2 3 4 Signal TxD- 34 11 25 2 TxD+ 37 14 28 5 RxD+ 19 33 10 24 RxD- 16 30 7 21 RS-422 RTS- 17 31 8 22 RTS+ 18 32 9 23 CTS+ 36 13 27 4 CTS- 15 29 6 20 GND 35 12 2
ページ9に含まれる内容の要旨
LINDY DB78 female 8 Port Serial Communication Boards Pin Assignment Port 1 2 3 4 5 6 7 8 Signal TxD- 21 6 30 15 60 45 69 54 TxD+ 1 25 10 34 40 64 49 73 RxD+ 2 26 11 35 41 65 50 74 RxD- 22 7 31 16 61 46 70 55 RS-422 RTS- 3 27 12 36 42 66 51 75 RTS+ 24 9 33 18 63 48 72 57 CTS+ 4 28 13 37 43 67 52 76 CTS- 5 29 14 38 44 68 53 77 GND 23 8 32 17 62 47 71 56 Port 1 2 3 4 5 6 7 8 Signal Data+ 1 25 10 34 40 64 49 73 Data- 21 6 30 15 60 45 69 54 RTS- 3 27 12 36 42 66 51 75 RS-485 RTS+
ページ10に含まれる内容の要旨
LINDY Serial Communication Boards feature a 1 x DB37 Male to 4 DB9 Male cable for the 4 port version, and a 1 x DB78 Male port to 8 x DB9 Male ports cable, for 8 port version. DB37 Male to 4 x DB9 or DB25 Male Cable DB78 Male to 8 x DB9 or DB25 Male Cable - 8 -
ページ11に含まれる内容の要旨
6.1 Jumper Settings These cards feature built-in termination resistors for each serial port. You can modify the jumper settings (short the pins) to avoid impedance mismatch problems when operating under multi-drop transmission. When an electrical signal travels through two resistance junctions in a transmission line, the impedance mismatch will sometimes cause signal reflection. Signal reflection causes signal distortion, which in turn contributes to communication errors. The soluti
ページ12に含まれる内容の要旨
7.0 Driver Installation 7.1 Windows 2000 / XP / 2003: On booting up, the system will detect the presence of the PCI Serial card and prompt for the driver installation wizard. Please ignore this for known and insert the driver CD in your CD/DVD ROM drive. Run the setup file: : \PCI IO\win2k and xp\setup.exe (1) Please click “Next” to continue. - 10 -
ページ13に含まれる内容の要旨
(2) You can select the folder location in which the driver is installed. Click Next” to continue. (3)The Software Installation Notice will appear, please click “Continue Anyway”, and the system will install the driver automatically. (4) Please click “Finish” and eject the driver CD. - 11 -
ページ14に含まれる内容の要旨
(5) Please go back to the “Found New Hardware Wizard” window. Select “Install the software automatically (Recommend)” and click “Next”. (6) The system will search and install the appropriate I/O driver automatically. (7) The “Hardware Installation Notice” will appear, please click “Continue Anyway” and the system will install the driver automatically. (8) Please click “Finish” to complete this installation step. Note: The “Found New Hardware Wizard” windows will show up and re-i
ページ15に含まれる内容の要旨
(9) To uninstall the driver: Please click Start > Control Panel > Add or Remove Programs Click “Change/Remove” to uninstall the I/O driver. 7.2 Windows 2000 / XP / 2003 on a 64-bit system: On booting up, Windows 2000 / XP / 2003 will detect the presence of the PCI Serial card and will prompt for driver installation. Insert the driver CD in your CD/DVD ROM drive and point to the directory: : \PCI IO\win2k and xp_64bit\ (Now follow the Windows 2000 / XP / 2003 install
ページ16に含まれる内容の要旨
7.5 Dos: Please install the driver from the CD ROM: \PCI IO\DOS\install.exe, and follow the installation steps from the CD ROM: \PCI IO\serial.pdf 7.6 Windows 95 / 98SE / ME: On booting up, Windows 95 / 98SE / ME will detect the presence of the PCI Serial card and will prompt for driver installation. Insert the driver CD in your CD/DVD ROM drive and point to the directory: : \PCI IO\win9x\ (1) The system will detect the new hardware device “PCI Serial Controller” and the “Found
ページ17に含まれる内容の要旨
(2) Select “Search for the best driver for your device (Recommended)” and click “Next” to continue. (3) Please select “Specify a location” and point to the CD Driver directory to install the driver. : \PCI IO\win9x\ - 15 -
ページ18に含まれる内容の要旨
(4) The system will search and install the appropriate IO driver automatically. Please click “Next” to continue. (5) Please click “Finish” to complete this installation step. Note: The “Add New Hardware Wizard” windows will display and install drivers several times until you finish setting up each serial port. 7.7 Verifying Serial PCI card installation: - 16 -
ページ19に含まれる内容の要旨
When Windows has finished installing the driver you must check: Control Panel > System > Hardware > Device Manager >Ports[COM&LPT] It will show the additional ports: Note: 1. If you have installed PCI Serial ports in your system, you will be requested to restart your computer, when you have finished setting up each serial port. Click “Yes” if all serial ports have been installed, otherwise click “No”. 2. The item number you see during the installation may be different from the
ページ20に含まれる内容の要旨
8.0 Configure COM port (1) Select the PCI Serial Port which you want to configure, for example COM3. Right click the mouse, and select “Properties”. (2) Click “Port Settings”. Configure the Bits per second, Data bits, Parity, Stop bits and Flow control if you want to change them. There are three kinds of flow control: Xon/Xoff, Hardware and None. Xon/Xoff is using software protocol. Hardware means the flow control is using RTS/CTS, but the RT
