ページ1に含まれる内容の要旨
Hardware Maintenance Manual
ThinkServer RD220 Types 3797, 3798, 3779, and 3729
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ThinkServer RD220 Types 3729, 3779, 3797, and 3798 Hardware Maintenance Manual
ページ4に含まれる内容の要旨
Note: Before using this information and the product it supports, read the general information in “Notices,” on page 247 and the Warranty and Support Information document on the ThinkServer Documentation DVD. Second Edition (November 2009) © Copyright Lenovo 2005, 2009. Portions © Copyright International Business Machines Corporation 2007, 2008. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commer
ページ5に含まれる内容の要旨
Contents Chapter 1. About this manual ...................1 Important Safety Information ....................1 Important information about replacing RoHS compliant FRUs ........1 Turkish statement of compliance...................2 Chapter 2. Safety information ...................3 Guidelines for trained service technicians ...............4 Inspecting for unsafe conditions..................4 Guidelines for servicing electrical equipment .............4 Safety statements ........................6 In
ページ6に含まれる内容の要旨
System event/error log messages .................136 Solving power problems.....................143 Hard disk drive problems.....................144 Solving Microprocessor problems..................144 Solving Ethernet controller problems ................144 Solving undetermined problems ..................145 Problem determination tips....................146 Calling IBM for service .....................147 Chapter 6. Removing and installing FRUs .............149 Locations .......................
ページ7に含まれる内容の要旨
Removing a SAS controller from the SAS riser card..........203 Installing a SAS controller on the SAS riser card...........204 Moving the SAS-controller retention bracket.............206 Removing a SAS controller battery from the remote battery tray .....207 Installing a SAS controller battery on the remote battery tray ......209 Removing a hot-swap hard disk drive ...............211 Installing a hot-swap hard disk drive................211 Removing a CD-RW/DVD drive .................213 Installi
ページ8に含まれる内容の要旨
vi ThinkServer RD220 Types 3729, 3779, 3797, and 3798: Hardware Maintenance Manual
ページ9に含まれる内容の要旨
Chapter 1. About this manual This Hardware Maintenance Manual contains information to help you solve problems that might occur in your server. It describes the diagnostic tools that come with the server, error codes and suggested actions, and instructions for replacing failing components. The most recent version of this document is available at http://www.lenovo.com/ support. Before servicing a Lenovo product, be sure to read the Safety Information. See Chapter 2, “Safety information,” on page 3
ページ10に含まれる内容の要旨
are not required to have RoHS compliant parts. If the parts are not compliant originally, replacement parts can also be noncompliant, but in all cases, if the parts are compliant, the replacement parts must also be compliant. Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and
ページ11に含まれる内容の要旨
Chapter 2. Safety information Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Lees voordat u dit product installeert eerst de veiligheidsvoorschriften. Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d’installer ce produit, lisez les consigne
ページ12に含まれる内容の要旨
Guidelines for trained service technicians This section contains information for trained service technicians. Inspecting for unsafe conditions Use the information in this section to help you identify potential unsafe conditions in a Lenovo product that you are working on. Each Lenovo product, as it was designed and manufactured, has required safety items to protect users and service technicians from injury. The information in this section addresses only those items. Use good judgment to identify
ページ13に含まれる内容の要旨
v Do not touch the reflective surface of a dental mirror to a live electrical circuit. The surface is conductive and can cause personal injury or equipment damage if it touches a live electrical circuit. v Some rubber floor mats contain small conductive fibers to decrease electrostatic discharge. Do not use this type of mat to protect yourself from electrical shock. v Do not work alone under hazardous conditions or near equipment that has hazardous voltages. v Locate the emergency power-off (EPO
ページ14に含まれる内容の要旨
Safety statements Important: Each caution and danger statement in this document is labeled with a number. This number is used to cross reference an English-language caution or danger statement with translated versions of the caution or danger statement in the Safety Information document. For example, if a caution statement is labeled ″Statement 1,″ translations for that caution statement are in the Safety Information document under ″Statement 1.″ Be sure to read all caution and danger statements
ページ15に含まれる内容の要旨
Statement 1: DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a properly wired and grounded electrical outlet. v Connect to properly wired outlets any equipment that will be attached to this product. v When possible, use one hand only to connect or disconnect sign
ページ16に含まれる内容の要旨
Statement 2: CAUTION: When replacing the lithium battery, use only a type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of. Do not: v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble Dispose of the battery as required by local ordinances or regulati
ページ17に含まれる内容の要旨
Statement 3: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. DANGER Some laser products contain an e
ページ18に含まれる内容の要旨
Statement 4: ≥ 18 kg (39.7 lb) ≥ 32 kg (70.5 lb) ≥ 55 kg (121.2 lb) CAUTION: Use safe practices when lifting. Statement 5: CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. 10 ThinkServer RD220 Types 3729, 3779, 3797, and 3798:
ページ19に含まれる内容の要旨
Statement 8: CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. Statement 26: CAUTION: Do not place any object on top of rack-mounted devices. Attention: This server is suitable for use on an IT power dist
ページ20に含まれる内容の要旨
3. From Family list, select ThinkServer, and click Continue. 4. Click Downloads and drivers to download firmware updates. 5. Click User’s guides and manuals for documentation. v Before you install optional hardware, make sure that the server is working correctly. Start the server, and make sure that the operating system starts, if an operating system is installed, or that a 19990305 error code is displayed, indicating that an operating system was not found but the server is otherwise working cor
