ページ1に含まれる内容の要旨
TE430VX
Motherboard
Technical Product Specification
Order Number 281817-003
May 1996
ページ2に含まれる内容の要旨
Revision History Revision Revision History Date -003 Fixed drawing designators, added USB module, corrected inaccuracies, 5/96 reworded sections for clarity, removed reference to Creative Labs Vibra 16S with Yamaha FM Synthesis -002 Changed Name of product from Advanced/TE to TE430VX throughout 4/96 -001 Preliminary release of the TE430VX Technical Product Specification. 3/96 This product specification applies only to standard TE430VX ATX motherboards with BIOS identifier 1.00.01.CY0. Changes to
ページ3に含まれる内容の要旨
Table of Contents 1 Motherboard Description 1.1 Overview ............................................................................................................7 1.2 Motherboard Manufacturing Options..................................................................9 1.3 Form Factor .......................................................................................................9 1.4 Microprocessor.........................................................................................
ページ4に含まれる内容の要旨
TE430VX Motherboard Technical Product Specification 1.10.4 Power Connector - J7M2....................................................................18 1.10.5 Floppy Drive Connector - J10H1 ........................................................19 1.10.6 IDE Connectors - J9H1, J9H2.............................................................19 1.10.7 Front Panel I/O Connectors - J9E2.....................................................20 1.10.8 ISA Connectors- J1A1, J1A2, J1B1 .................
ページ5に含まれる内容の要旨
Contents 3 Motherboard BIOS and Setup Utility 3.1 Introduction ......................................................................................................41 3.2 BIOS Flash Memory Organization ...................................................................41 3.3 BIOS Upgrades ................................................................................................42 3.4 PCI IDE Support...........................................................................................
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
1 Motherboard Description 1.1 Overview ® The TE430VX design accepts Pentium processors operating at 75 MHz, 90 MHz, 100 MHz, 120 MHz, 133 MHz, 150 MHz, 166 MHz, and 200MHz. There is an option of having 256 KB of Pipeline Burst SRAM soldered onto the motherboard, or a Card Edge Low Profile (CELP) connector for cache expandability. The memory subsystem is designed to support up to 128 MB of EDO DRAM, or up to 64 MB of a new memory architecture called SDRAM, in standard 168-pin ® DIMM sockets.
ページ8に含まれる内容の要旨
TE430VX Motherboard Technical Product Specification A BCDE F G P H HH I GG Q FF J K EE L R M DD N CC O BB AA ZY XW VU T S OM04814 Figure 1. Motherboard Features Tigereye board diagram † A. Optional Yamaha FM synthesizer R. 82430VX TDX B. Optional Creative Labs Audio device S. Floppy connector C. Optional telephony connector T IDE connectors D. Optional CD-ROM audio connector U. PIIX3 PCI/ISA/IDE Xcelerator E. Creative Labs ModemBlaster connector V. Optional S3 Trio64V+ graphics controller F. W
ページ9に含まれる内容の要旨
Motherboard Description 1.2 Motherboard Manufacturing Options • Creative Labs Vibra 16C Audio • S3 Trio64V+ Video • CELP Module or soldered 256k PBSRAM with GWE • USB • Split Plane Voltage Support for Socket 7 • Flash Recovery 1.3 Form Factor The motherboard is designed to fit standard ATX form factor chassis. Figure 2 illustrates the motherboard’s dimensions. The motherboard meets the standard ATX specification guidelines in that the outer dimensions are 12" x 9.6". Location of the I/O conne
ページ10に含まれる内容の要旨
TE430VX Motherboard Technical Product Specification 1.4 Microprocessor The motherboard is designed to operate with 3.3 volt Pentium Processors running at 75, 90, 100, 120, 133, 150, 166, and 200MHz. An onboard linear voltage regulator circuit provides the required 3.3 volts from the 5.0 volt tap of the power supply. An on-board jumper enables use of VRE specified processors. The Pentium processor maintains full backward compatibility with 8086, 80286, i386 and Intel486 processors. It suppo
ページ11に含まれる内容の要旨
Motherboard Description 1.5.1.2 SDRAM Synchronous Dynamic Random Access Memory, (SDRAM) is designed to improve main memory performance. SDRAM is synchronous to the memory clock unlike standard Fast Page DRAM, or EDO DRAM. All the timing is dependent on the number of memory clock cycles. This makes the timing design simpler and makes a faster memory speed easier to achieve. Discrete SDRAM components must meet the 66 MHz PC SDRAM Specification version 1.0 to function correctly. 1.5.2 Second Le
ページ12に含まれる内容の要旨
1.6.2 82430VX Data Path (TDX) Two 82430VX TDX data path components provide a 64-bit microprocessor to memory path. The TDX components are controlled by the TVX. They each add one load to the PCI bus and perform all of the required byte and word swapping. The TDX devices come in a 208 pin QFP package. 1.6.3 PCI ISA/IDE Xcelerator (PIIX3) The PIIX3 provides the interface between the PCI and ISA buses and integrates a dual channel fast IDE interface capable of supporting up to 4 devices. The PI
ページ13に含まれる内容の要旨
Motherboard Description 1.7 Ultra I/O Interface Controller (SMC FDC37C93FR) 1.7.1 Floppy controller The SMC FDC37C93FR is software compatible with the DP8473 and 82077 floppy disk controllers. The floppy interface can be configured for 360 KB or 1.2 MB 5¼" media or for 720 KB, 1.2 MB, 1.44 MB, or 2.88 MB 3½" media in the BIOS setup. By default, the Floppy A interface is configured for 1.44 MB and Floppy B is disabled. Another setup option prevents the user from being able to write to floppy.
ページ14に含まれる内容の要旨
TE430VX Motherboard Technical Product Specification 1.7.4 IrDA (infra-red) support A 5-pin interface on the front panel I/O connector is provided to allow connection to a Hewlett † Packard HSDSL-1000 compatible Infra-red (IrDA) transmitter/receiver. Once the module is connected to the front panel I/O header, Serial port 2 can be re-directed to the IrDA module. When configured for IrDA, the user can transfer files to or from portable devices such as laptops, PDA’s † and printers using applicati
ページ15に含まれる内容の要旨
Motherboard Description 1.8.1 Resolutions supported Table 1. Graphics Resolutions Supported by Supported by Resolution 1 MB DRAM 2 MB DRAM Refresh Rate (Hz) 640x480x16 colors Yes Yes 640x480x256 colors Yes Yes 60,72,75,85 640x480x64k colors Yes Yes 60,72,75 640x480x16.7m colors No Yes 60,72,75 800x600x256 colors Yes Yes 56,60,72,75,85 800x600x64k colors Yes Yes 60,72,75 800x600x16.7m colors No Yes 60,72,75 1024x768x256 colors Yes Yes 43(IL),60,70,75,85 1024x768x64k colors No Yes 43(IL),60,70,75
ページ16に含まれる内容の要旨
TE430VX Motherboard Technical Product Specification The audio subsystem requires up to two DMA channels (to support full duplex operation) and one interrupt. When the Vibra 16C is programmed for full duplex operation, two DMA channels are assigned: one of the channels will be a 16-bit channel and the other will be 8 bits. The system can be configured to use either DMA channels 1 or 3 (8 bit channels) and DMA channels 5 or 7 (16 bit channels). The interrupt can be mapped to IRQ 5, 7, 9, or 10.
ページ17に含まれる内容の要旨
Motherboard Description 1.10 Motherboard Connectors Figure 3 shows the connectors on the motherboard. Pin call outs and signal names follow Figure 3. J1F1 2 10 1 9 Mod-blast Connector J2F3 J2F2 2 14 J2F1 1 7 CDROM Telephony Wave Table Connector Connector Connector 1 DIMM Sockets(2) A(J3F1) B(J3G1) CELP Cache PCI Socket Connectors(4) (J2J1) J2C1, J2D1 J2E1, J2E2 J7L1 6 1 ISA AB 3.3 Volt Power Connectors(3) Connector J1A1, J1A2 J1B1 J7M2 2 20 40 J9H1 1 20 J9H2 1 39 Power Connector PCI IDE Connecto
ページ18に含まれる内容の要旨
TE430VX Motherboard Technical Product Specification 1.10.1 CD-ROM Connector - J2F2 Pin Signal Name 1 Ground 2 CD Audio Left Speaker 3 Ground 4 CD Audio Right Speaker 1.10.2 Wave Table Connector - J2F3 Pin Signal Name 1 Wave Right 2 Ground 3 Wave Left 4 Ground 5 Key 6 Ground 7 MIDI_In 8 MIDI Out 1.10.3 Telephony Connector - J2F1 Pin Signal Name 1 Mic In 2 Ground 3 Mono Out 4 Key 1.10.4 Power Connector - J7M2 Pin Signal Name Pin Signal Name 1 +3.3V 11 +3.3V 2 +3.3V 12 -12V 3 Ground 13 Ground 4 +5V
ページ19に含まれる内容の要旨
Motherboard Description 1.10.5 Floppy Drive Connector - J10H1 Pin Signal Name Pin Signal Name 1 Ground 2 DENSEL 3 Ground 4 Reserved 5 Key 6 FDEDIN 7 Ground 8 Index # 9 Ground 10 Motor Enable A # 11 Ground 12 Drive Select B # 13 Ground 14 Drive Select A # 15 Ground 16 Motor Enable B # 17 MSEN1 18 DIR # 19 Ground 20 STEP # 21 Ground 22 Write Data # 23 Ground 24 Write Gate # 25 Ground 26 Track 00 # 27 MSEN0 28 Write Protect # 29 Ground 30 Read Data # 31 Ground 32 Side 1 Select # 33 Ground 34 Disket
ページ20に含まれる内容の要旨
TE430VX Motherboard Technical Product Specification IDE Connectors - J9H1, J9H2 (continued) Pin Signal Name Pin Signal Name 29 DDACK0 (DDACK1) # 30 Ground 31 IRQ14 (IRQ15) 32 Reserved 33 Addr 1 34 Reserved 35 Addr 0 36 Addr 2 37 Chip Select 1P (1S) # 38 Chip Select 3P (3S) # 39 Activity # 40 Ground 1.10.7 Front Panel I/O Connectors - J9E2 Pin Signal Name 1 Power On 2 Power Return 3 Sleep Req 4 Sleep Driver 5 Key 6 +5V 7 Key 8 IR_RX 9 Ground 10 IR_TX 11 IR_SL1 12 Key 13 +5V 14 Key 15 HD ACTIVE 16
