ページ1に含まれる内容の要旨
PX875P Series
Copyright
All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or computer language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of the company. Brands and product names are trademarks or registered
trademarks of their respective companies.
The vendor makes no representati
ページ2に含まれる内容の要旨
You have to know !!! The images and pictures in this manual are for reference only and may vary slightly from actual product installation depending on specific hardware models, third party components and software versions. Unplug your computer when installing components and configuring switches and pins. This mainboard contains very delicate IC chips. Use a grounded wrist strap when working with the system. Do not touch the IC chips, leads, connectors or other components. Unplug th
ページ3に含まれる内容の要旨
PX875P Series ® Intel 82875P & ICH5 ® ® Supports Socket 478 Intel Pentium 4 Processor User Manual Enabling Hyper-Threading for your computer system requires ALL of the following components ® ® CPU: An Intel Pentium 4 Processor with HT Technology ® Chipset: An Intel Chipset that supports HT Technology BIOS: A BIOS that supports HT Technology must be enabled OS: An operating system that supports HT Technology For more information on Hyper-Threading Technolo
ページ4に含まれる内容の要旨
Contents CHAPTER 1. GETTING STARTED ............................................................1 INTRODUCTION.......................................................................................................... 1 SPECIFICATION.......................................................................................................... 2 QUICK CONTENT TABLE ........................................................................................... 5 CONFIGURATION ..........................
ページ5に含まれる内容の要旨
PX875P PRO/ PX875P Chapter 1. Getting Started Introduction Congratulations on choosing the PX875P Series mainboard! The PX875P series includes the PX875P PRO (V2.0) and PX875P (V2.0). These are based on the 82875P Northbridge chipset and the ICH5 ® ® Southbridge chipset. It supports Intel Pentium 4 Processors with a FSB (Front Side Bus) frequency of 400/ 533/ 800 MHz. The PX875P series provides 4 DIMM slots using 184 pin DDR SDRAM with a total capacity of up to 4GB. You can i
ページ6に含まれる内容の要旨
PX875P PRO/ PX875P Specification CPU: ® Supports Socket 478 Pentium 4 processor (Northwood/ Prescott) Supports Hyper Threading Technology Speed: 400/ 533/ 800 MHz Front Side Bus frequency 33MHz, 32 bit PCI interface (PCI 2.2 compliant) 66MHz AGP 3.0 compliant interface that supports 8X/4X data transfer modes (0.8V or 1.5V) Chipset: Northbridge Chip (MCH) – Intel 82875P Southbridge Chip (ICH) – Intel ICH5 I/O Controller – Winbond W83627THF AC’97 Codec – Real
ページ7に含まれる内容の要旨
PX875P PRO/ PX875P BUS Slots: AGP slot (AGP3.0, 4X/ 8X) x 1 32-bit PCI bus slot x 5 Flash Memory: Supports flash memory functionality Supports ESCD functionality Hardware Monitor Function: Monitors all fan Speeds Monitors System Voltage Infrared: Supports IrDA Version 1.0 SIR Protocol with a maximum baud rate of up to 115.2 Kbps Supports SHARP ASK-IR Protocol with maximum baud rate of up to 57600 bps 3COM LAN Chip on board: (only for PX875P PRO V1.0) 10
ページ8に含まれる内容の要旨
PX875P PRO/ PX875P Universal Serial Bus: Supports up to eight USB ports for USB interface devices Supports USB 2.0 Enhanced Host Controller Interface (EHCI) and USB 1.1 Open Host Controller Interface (OHCI) Serial ATA facilities: Compatible with SATA Spec 1.0 Supports Serial ATA specification of 150 MB/sec transfers I/O facilities: One multi-mode Parallel Port capable of supporting the following specifications: 1. Standard & Bi-direction Parallel Port 2. Enhanced
ページ9に含まれる内容の要旨
PX875P PRO/ PX875P Quick Content Table Function Content Location Page CPU Socket 478 U8 10 DDR DIMM Slots DIMM 1、2、3、4 11 ATX Power Connector ATX_12V、ATX_ PWR 21 IDE Connectors、SATA Connectors IDE1/2、SATA1/2 16 FDC Connector FDC 16 AGP Slot AGP 21 PCI 1、2、3、4、5 PCI Slots 21 CPU FAN、Chassis FAN、 CPUFAN、CHASFAN、AUXFAN 11 Auxiliary FAN SW/LED、PWRLED、SPEAKER Front Panel Indicator 15 Infrared Connector IrDA 17 Front USB Headers USB2、USB3、USB4 17 Clear CMOS Jumper JP1 1
ページ10に含まれる内容の要旨
Winbond W83627THF PX875P PRO/ PX875P Configuration Layout of PX875P PRO KB/MS ATX_12V USB/LAN ATX_PWR U8 PRT/COM U12 1 CPUFAN SOUND Intel 82875P IDE2 IDE1 AUXFAN 1 AGP ALC 655 PCI1 BAT1 PCI2 3COM U19 LAN 10 2 9 1 PCI3 USB4 Intel 1 JP1 1 CASE OPEN ICH5 SATA2 U21 PCI4 SATA1 PCI5 FDC 1 CHASFAN USB2 USB3 1 PWRLED 2 2 2 10 2 10 2 1 1 9 1 1 1 1 1 9 1 CD-IN SPDIF SPEAKER SW/LED FRONT AUDIO IrDA 6 BIOS Socket 478 DIMM1 DIMM2 DIMM3 DIMM4
ページ11に含まれる内容の要旨
Winbond W83627THF PX875P PRO/ PX875P Layout of PX875P KB/MS ATX_12V USB ATX_PWR U8 PRT/COM U12 1 CPUFAN SOUND Intel 82875P IDE2 IDE1 AUXFAN 1 AGP ALC 655 PCI1 BAT1 PCI2 U19 2 10 9 1 PCI3 USB4 Intel 1 JP1 1 CASE OPEN ICH5 SATA2 U21 PCI4 SATA1 PCI5 FDC 1 CHASFAN USB2 USB3 PWRLED 1 2 2 2 2 10 2 10 1 1 9 9 1 1 1 1 1 1 FRONT AUDIO CD-IN SPDIF SPEAKER SW/LED IrDA 7 BIOS Socket 478 DIMM1 DIMM2 DIMM3 DIMM4
ページ12に含まれる内容の要旨
Winbond W83627THF PX875P PRO/ PX875P Layout of PX875P PRO V2.0 KB/MS ATX_12V USB ATX_PWR U8 PRT/COM 1 U12 CPUFAN USB/LAN Intel 82875P IDE2 IDE1 AUXFAN 1 AGP PCI1 LAN BAT1 Controller PCI2 U19 U21 PCI3 Intel 1 JP1 1 CASE OPEN ICH5 SATA2 PCI4 SATA1 PCI5 ALC FDC 655 1 CHASFAN USB2 USB3 PWRLED 1 2 2 2 2 10 2 10 1 1 9 9 1 1 1 1 1 1 FRONT AUDIO CD-IN SPDIF SPEAKER SW/LED IrDA 8 BIOS Socket 478 DIMM1 DIMM2 DIMM3 DIMM4
ページ13に含まれる内容の要旨
Winbond W83627THF PX875P PRO/ PX875P Layout of PX875P V2.0 KB/MS ATX_12V USB ATX_PWR U8 PRT/COM 1 U12 CPUFAN USB Intel 82875P IDE2 IDE1 AUXFAN 1 AGP PCI1 BAT1 PCI2 U19 U21 PCI3 Intel 1 JP1 1 CASE OPEN ICH5 SATA2 PCI4 SATA1 PCI5 ALC FDC 655 1 CHASFAN USB2 USB3 PWRLED 1 2 2 2 2 10 2 10 1 1 1 9 9 1 1 1 1 1 FRONT AUDIO CD-IN SPDIF SPEAKER SW/LED IrDA 9 BIOS Socket 478 DIMM1 DIMM2 DIMM3 DIMM4
ページ14に含まれる内容の要旨
PX875P PRO/ PX875P Hardware Installation This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before handling components. Electrostatic discharge may damage your system components. CPU Processor Installation ® ® This mainboard supports Intel Pentium 4 processors using a Socket 478. Before building your system, we suggest you visit the Intel website and review the processor installation procedures. http://www.intel.com CPU Socket 47
ページ15に含まれる内容の要旨
KB/MS ATX_12 V ATX_PWR USB/LAN U8 PRT/COM U12 1 CPUFAN SOUND Intel 82875P IDE2IDE1 AUXFAN 1 Winbond AGP W83627HF ALC 650 PCI1 B AT1 PCI2 3COM U1 9 LAN 2 10 9 PCI3 1 USB4 Intel 1 JP1 1 C ASE OPEN ICH5 SATA2 U21 PCI4 SATA1 PCI5 FDC CHASFAN 1 USB2 USB3 1 PWRLED 2 2 22 101 2 10 1 1 1 11 9 1 9 FRO NT A UDI O CD-IN SPDIF IrDA SPEAKER 1 SW/LED PX875P PRO/ PX875P FAN Headers Three power headers are available for cooling fans, which play an important role in maintaining the ambient temperat
ページ16に含まれる内容の要旨
PX875P PRO/ PX875P To Enable Dual-Channel DDR, the following conditions must be met: 1.You must use either DIMM1 & DIMM3 together or DIMM2 & DIMM4 together or all four DIMM slots together. 2.You must use matching DIMM configurations between DIMM1 & DIMM3. You must use matching DIMM configurations between DIMM2 & DIMM4. Same Density (128MB, 256MB, 512MB, etc.) Same DRAM technology (128Mb, 256Mb, or 512Mb) Same DRAM bus width (x8 or x16) Both either single-sided or dual-sid
ページ17に含まれる内容の要旨
PX875P PRO/ PX875P Back Panel Configuration (optional) (optional) PS/2 PS/2 Game Port Printer Port Printer Port LAN LAN Mouse Mouse Mic In Line In Speaker Out USB COM1 COM2 USB COM1 COM2 USB PS/2 PS/2 Speaker Mic In Out Keyboard Keyboard Line In (For V1.0) (For V2.0) PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS The series mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin assignments are described below: PS/2 Mouse Pin Assignment Pin Assi
ページ18に含まれる内容の要旨
PX875P PRO/ PX875P Serial and Parallel Interface Ports The series mainboard comes equipped with two serial ports and one parallel port on the back panel. These interface ports will be explained below. Printer Port COM1 COM2 Parallel Interface Port: PRT The parallel port on your system has a 25-pin, DB25 connector and is used to interface with parallel printers and other devices using a parallel interface. The Serial Interface: COM1/ COM2 The serial interface port i
ページ19に含まれる内容の要旨
KB/MS ATX_12V ATX_PWR USB/LAN U8 PRT/COM U12 1 CPUFAN SOUND Intel 82875P IDE2IDE1 AU XFAN 1 Winbond AGP W83627HF ALC 650 PCI1 BAT1 PCI2 3COM U19 LAN 2 10 9 PCI3 1 USB4 Intel 1 JP1 ICH5 SATA2 1 C ASE OPEN U21 PCI4 SATA1 PCI5 FDC 1 CHASFAN USB2 USB3 1 PWRLED 2 2 22 101 2 10 1 1 1 11 9 1 9 FRO NT A UDI O CD-IN SPDIF IrDA SPEAKER 1 SW/LED 2 PX875P PRO/ PX875P Front Panel Indicator: SW/LED 、PWRLED 、SPEAKER BIOS PC_BEEP 1 NC 2 Socket 478 Ground 3 +5V 4 SPEAKER + 1 DIMM1 DIMM
ページ20に含まれる内容の要旨
KB/MS ATX_12 V ATX_PWR USB/LAN PRT/COM U8 U12 1 CPUFAN SOUND Intel IDE2IDE1 82875P AUXFAN 1 Winbond AGP W83627HF ALC 650 PCI1 BAT1 PCI2 3COM U1 9 LAN 2 10 9 PCI3 1 USB4 In tel 1 JP1 1 C ASE OPEN ICH5 SATA2 U21 PCI4 SATA1 PCI5 FDC 1 CHASFAN USB2 USB3 10 1 PWRLED 2 2 22 1 2 10 1 1 1 11 9 1 9 1 FRO NT A UDI O CD-IN SPDIF IrDA SPEAKER SW/LED PX875P PRO/ PX875P Connectors Floppy Disk Connector: FDC The series mainboard provides a standard floppy disk connector (FDC) that supports 360K,
