ページ1に含まれる内容の要旨
BX400ii Interposer Board
User’s Manual
March 29, 2000
Order Number: 273224-003
ページ2に含まれる内容の要旨
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merch
ページ3に含まれる内容の要旨
BX400ii Interposer Board Contents 1.0 Introduction.........................................................................................................................5 1.1 Key Terms .............................................................................................................5 1.2 Related Documents...............................................................................................5 1.3 Pentium® II Processor Mobile Module: Mobile Module Connector 2 or Low Power Pent
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
1.0 Introduction This document introduces the BX400ii Interposer Board and provides installation instructions. ® ® The BX400ii Interposer Board with the Intel Mobile Pentium II Processor emulates the ® ® functionality of the Intel Pentium II Processor Mobile Module to provide a bus interconnect for emulation and logic analysis tools. This board is used for Intel Pentium II Processor Mobile Module system designs. Note: Due to additional signal loading and trace lengths, the BX400ii Interposer Boa
ページ6に含まれる内容の要旨
Introduction ® 1.3 Pentium II Processor Mobile Module: Mobile Module Connector 2 or Low Power Pentium II Processor Module The Pentium II Processor Mobile Module: Mobile Module Connector 2 (400-pin MMC-2) or Low Power Pentium II Processor Module (LPM) is a small, highly integrated assembly containing an Intel Pentium II processor and its immediate system-level support. Specifically, the processor module contains a power regulator, level 2 (L2) cache memory, and the core logic required to bridge t
ページ7に含まれる内容の要旨
Introduction Figure 1. Top View of BX400ii Interposer Board Assembly ® Mobile Pentium II Processor in Minicartridge 30-Pin Debug Port Connector 190-Pin System Bus Connector 82443BX Host Bridge Controller Dashed line indicates 400-Pin LPM Connector on underside A6366-01 The same 400-pin system interface is still provided to allow connection to the target system. In addition, a top side 240-pin connection is added for the Intel Mobile Pentium II Processor in mini- cartridge. This processor, plus
ページ8に含まれる内容の要旨
Introduction 1.5 BX400ii Interposer Board Dimensions This section provides the physical dimensions for the BX400ii Interposer Board. Note: Notice in Figure 2 the mechanical clearance requirements for the BX400ii Interposer Board compared to the Low Power Module (LPM). Figure 2. BX400ii Keepout Space Requirements 190-Pin Connector Top View BX-400ii LPM 400-Pin Connector on the LPM (Low Power Module) 2.5" 4" A6372-01 Figure 3. BX400ii Connector Clearance Side View BX400ii Interposer Board Clearanc
ページ9に含まれる内容の要旨
Getting Started 2.0 Getting Started The BX400ii Interposer Board requires a Mobile Pentium II Processor in mini-cartridge at a frequency corresponding to the mobile module that is being emulated. 2.1 Unpacking Instructions Carefully unpack the contents of the box and verify that all of the items in the packing list are present. If items are missing or damaged, contact Intel or your authorized distributor. 2.1.1 Important Static Electricity Precautions Take appropriate measures to prevent static
ページ10に含まれる内容の要旨
Getting Started Note: Please consider the thermal requirements of your Mobile Pentium II processor and ensure that the proper thermal management solution is in place. 2.2.2 Emulator/Logic Analyzer Connect the 30-pin cable from the emulator or logic analyzer to the debug port connector on the BX400ii Interposer Board. If you have a debug port designed into your system, only the debug port on the BX400ii Interposer Board will function. The port on the system board will not function with the BX400i
ページ11に含まれる内容の要旨
Hardware Reference 3.0 Hardware Reference For a hardware layout of the BX400ii Interposer Board, refer to Figure 5onpage 13. For board dimensions and keepout space requirements, refer to Figure 2 and Figure 3onpage 8. 3.1 Connector Definitions Changes to the hardware are not required for the BX400ii Interposer Board. If necessary, you can ® refer to the Mobile Pentium II Processor at 233 MHz, 266 MHz and 300 MHz datasheet (order number 243669), Intel® Pentium® II Processor Mobile Module: Mobile
ページ12に含まれる内容の要旨
Hardware Reference 3.3 Test Points Power measurement header descriptions are provided in Table 4. Table 4. Power Measurement Header Descriptions Effective Header Voltage Rail Resistor Description Resistance (Ω ) P1 +VGTLREF_BX (5/9 VTT) R28 0.01 GTL reference voltage for 440BX 3.3 V rail for 440BX AGPset: P2 +V3_AGPREF (3.3V) R45 0.01 82443BX reference P5, P6 +V3_BX (3.3V) R57 0.01 3.3 V rail for BX core P7 +V3_PU (3.3V) R58 0.01 3.3 V rail for pull-ups 3.3 V rail for voltage regulator P8 +V3_VR
ページ13に含まれる内容の要旨
Hardware Reference Figure 5. BX400ii Board Layout Drawing BX400ii Interposer Board User’s Manual 13
ページ14に含まれる内容の要旨
