ページ1に含まれる内容の要旨
HS-2606
ULV Intel® Celeron® processor
Embedded Engine Board
‧CompactFlash ‧PCMCIA ‧Mini PCI ‧
‧SO-DDR ‧CRT/Panel ‧TV-Out ‧LAN ‧Audio ‧
‧ATA/33/66/100‧4 COM ‧USB2.0 ‧WDT ‧
‧Industrial Embedded Engine Board ‧
ページ2に含まれる内容の要旨
Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This
ページ3に含まれる内容の要旨
Table of Contents Chapter 1 General Description ..................................1 1.1 Major Features....................................................................... 2 1.2 Specifications ........................................................................ 3 1.3 Board Dimensions................................................................. 4 Chapter 2 Unpacking..................................................5 2.1 Opening the Delivery Package.................................
ページ4に含まれる内容の要旨
Chapter 4 AMI BIOS Setup.....................................25 4.1 Starting Setup...................................................................... 25 4.2 Using Setup ......................................................................... 26 4.3 Main Menu............................................................................ 27 4.4 Standard CMOS Setup........................................................ 28 4.5 Advanced CMOS Setup ...........................................
ページ5に含まれる内容の要旨
Safety Instructions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any static electricity on your body. Wear a
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Chapter 1 General Description The HS-2606 is a 100MHz FSB VIA CLE266/VT8235 chipset-based board designed for ULV Intel® Celeron® processor 400/650MHz. These features combine and make the HS-2606 an ideal all-in-one industrial single board computer. Additional features include an enhanced I/O with CompactFlash reader, PCMCIA, CRT/Panel, audio, LAN, TV-Out, 4 COM, and USB2.0 interfaces. Its onboard ATA/33/66/100 to IDE drive interface architecture allows the HS-2606 to support data transf
ページ8に含まれる内容の要旨
Additional onboard connectors include four advanced USB2.0 port providing faster data transmission. And one external RJ-45 connector for 10/100 Based Ethernet use. 1.1 Major Features The HS-2606 comes with the following features: ULV Intel® Celeron® processor 400/650MHz One SO-DDR socket with a max. capacity of 1GB VIA CLE266/VT8235 system chipset Winbond W83697UF super I/O chipset VIA CLE266 graphics controller RealTek RTL8139DL Ethernet controller AC97 3D audio controller
ページ9に含まれる内容の要旨
1.2 Specifications CPU: ULV Intel® Celeron® processor 400/650MHz Memory: One SO-DDR socket supporting up to 1GB Chipset: VIA CLE266/VT8235 I/O Chipset: Winbond W83697UF CompactFlash: One, Type II IDE interface adapter PCMCIA: Two PC Card or CardBus slots PCI Slot: One, Type I mini PCI slot VGA: VIA CLE266 integrated S3 3D supporting AGP Bus and Hardware MPEG-2 TV-Out: Supports PAL or NTSC TV systems Ethernet: RealTek RTL8139DL 10/100 Based LAN Audio: AC97 3D audio control
ページ10に含まれる内容の要旨
1.3 Board Dimensions 4
ページ11に含まれる内容の要旨
Chapter 2 Unpacking 2.1 Opening the Delivery Package The HS-2606 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures. 2.2 Inspection After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred du
ページ12に含まれる内容の要旨
Cables Package NO. Description 1 4-pin power cable x 1 2 MIC/Audio cable x 1 3 8-pin USB split type cable x 1 4 PS/2 KB/MS transfer cable x 1 5 RS-232 cable x 4 6 IDE flat cable x 1 It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately. 6
ページ13に含まれる内容の要旨
Chapter 3 Hardware Installation This chapter provides the information on how to install the hardware using the HS-2606. This chapter also contains information related to jumper settings of switch, and the watchdog timer selection etc. 3.1 Before Installation After confirming your package contents, you are now ready to install your hardware. The following are important reminders and steps to take before you begin with your installation process. 1. Make sure that all jumper settings match
ページ14に含まれる内容の要旨
3.2 Board Layout 8
ページ15に含まれる内容の要旨
3.3 Jumper List Jumper Default Setting Setting Page JBAT1 Clear CMOS: Normal Operation Short 1-2 10 JP2 Panel Voltage Select: +3.3V Short 1-2 12 3.4 Connector List Connector Definition Page CN1 4-pin Power In Connector 10 CN2 External VCC Out Connector 10 CN3 2-pin ATX Power In Connector 10 CN4 External Reset Button 10 CN5 PS/2 6-pin Mini DIN KB/MS Connector 18 CN6 RJ-45 Connector 14 CN7 15-pin CRT Connector 12 CN8/CN9/CN12/CN11 COM 1~COM 4 Connector (5x2 header) 17 CN10 TV-Out Con
ページ16に含まれる内容の要旨
3.6 System Memory The HS-2606 provides one 200-pin SO-DDR socket at locations DIM1. The maximum capacity of the onboard memory is 1GB. 3.7 CMOS Data Clear The HS-2606 has a Clear CMOS jumper on JBAT1. JBAT1: Clear CMOS Options Settings 13 Normal Operation (default) Short 1-2 Clear CMOS Short 2-3 Before you turn on the power of your system, please set IMPORTANT: JBAT1 to Short 1-2 for normal operation. 3.8 Power and Fan Connectors HS-2606 provides one 4-pin power connectors at
ページ17に含まれる内容の要旨
CN2: External VCC Out Connector PIN Description 1 VCC 1 2 GND 3 GND 4 4 VCC CN4: External Reset Button PIN Description 4 3 1 RST_SW 2 GND 3 GND 4 GND 2 1 FN1: Fan Connector PIN Description 1 GND 2 +5V 13 3 N/C Connector FN1 onboard HS-2606 is a 3-pin fan power output connector. And HS-2606 supports +5V Fan only. 3.9 System Front Panel Connectors The HS-2606 has one LED at location J2 that indicates the power-on status. This visual feature of the IDE LED may al
ページ18に含まれる内容の要旨
Connector J2 Orientation 1 2 HDD LED 3 4 SPEAKER 5 6 PWR Button 7 8 9 10 PWR LED RST_SW 11 12 3.10 VGA Controller The HS-2606 provides two connection methods of a VGA device. CN7 offers a single standard CRT connector while LCD1 is the 44-pin panel connector. VIA CLE266 VGA chipset shared main memory 8/16/32MB, and provides high quality DVD video playback. HS-2606 also provides Hardware MPEG-2. CN7: 15-pin CRT Connector PIN Description PIN Description 1 Red 2 Green 6 1 11 3 Blue 4
ページ19に含まれる内容の要旨
PIN Description PIN Description 17 GFPD8 18 GFPD9 19 GFPD10 20 GFPD11 21 GFPD12 22 GFPD13 23 GFPD14 24 GFPD15 25 GFPD16 26 GFPD17 27 GFPD18 28 GFPD19 29 GFPD20 30 GFPD21 31 GFPD22 32 GFPD23 33 N/C 34 N/C 35 SHFCLK 36 GFPVS 37 GFPDEN 38 GFPHS 39 GND 40 FPBKLP 41 N/C 42 N/C 43 N/C 44 N/C 2 44 1 43 NOTE: Please set the proper voltage of your panel using JP3 before proceeding on installing it. The HS-2606 has an onboard jumper that selects the working voltage of the flat panel
ページ20に含まれる内容の要旨
3.11 TV-Out Connector HS-2606 can support TV-Out function which input could be up to 800 x 600 graphics resolutions. World Wide Video standards are supported including NTSC-M (North America, Taiwan), NTSC-J (Japan), PAL-B, D, G, H, I (Europe, Asia), PAL-M (Brazil), PAL-N (Uruguay, Paraguay) and PAL-NC (Argentina). CN10: TV-Out Connector PIN Description PIN Description 3 14 1 TVCVB 2 GND 3 GND 4 GND 2 3.12 Ethernet Connector The HS-2606 provides one external RJ-45 interface c
