ページ1に含まれる内容の要旨
GA-8IPE1000 Series
® ®
Intel Pentium 4 Processor Motherboard
User's Manual
Rev. 4002
12ME-8IPE1K4-4002
ページ2に含まれる内容の要旨
Motherboard GA-8IPE1000-G / GA-8IPE1000-L / GA-8IPE1000 Motherboard GA-8IPE1000-G / GA-8IPE1000-L / GA-8IPE1000 Nov. 11, 2004 Nov. 11. 2004
ページ3に含まれる内容の要旨
Copyright © 2004 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In
ページ4に含まれる内容の要旨
Table of Contents GA-8IPE1000 Series Motherboard Layout .................................................................... 6 Block Diagram ............................................................................................................... 7 Chapter 1 Hardware Installation ................................................................................... 9 1-1 Considerations Prior to Installation ................................................................. 9 1-2 Feature Summar
ページ5に含まれる内容の要旨
Chapter 3 Drivers Installation ..................................................................................... 49 3-1 Install Chipset Drivers ................................................................................... 49 3-2 Software Application ...................................................................................... 50 3-3 Software Information ..................................................................................... 50 3-4 Hardware Information ...........
ページ6に含まれる内容の要旨
GA-8IPE1000 Series Motherboard Layout KB_MS CPU_FAN Socket 478 USB ATX ATX_12V Intel 865PE CD_IN RTL8110S or RTL8100C AGP F_AUDIO BATTERY PCI1 CLR_CMOS CODEC Intel ICH5 PCI2 FDD SUR_CEN PCI3 BIOS SATA0 SATA1 PCI4 IDE2 IR IDE1 PCI5 F_USB2 GAME F_PANEL F_USB1 SYS_FAN SPDIF_IO INFO_LINK PWR_LED Only for GA-8IPE1000-G. Only for GA-8IPE1000-L. - 6 - MIC_IN USB COMB COMA LINE_OUT SMSC LPT LINE_IN LAN LPC47M997-NR GA-IPE1000(-G)(-L) DDR1 DDR2 DDR3 DDR4
ページ7に含まれる内容の要旨
Block Diagram CPUCLK+/-(100/133/200MHz) Pentium 4 Socket 478 CPU AGP 4X/8X System Bus Dual Channel 400/533/800 MHz DDR 400/333/266MHz DIMM DDR AGPCLK 66MHz Intel 865PE HCLK+/- (100/133/200MHz) ZCLK (66 MHz) RJ45 RJ45 5 PCI 33MHz 14.318MHz 48MHz RTL8110S RTL8100C 66MHz BIOS PCI Bus 33MHz Game Port Intel ICH5 Floppy SMSC LPC47M997- LPT Port NR 2 COM Ports CODEC PCICLK 2 Serial 8 USB 14MHz ATA33/66/100 PS/2 KB/Mouse (33MHz) ATA Ports IDE Channels Only for GA-8IPE1000-G. Only for GA-8IPE1000-L. - 7
ページ8に含まれる内容の要旨
- 8 -
ページ9に含まれる内容の要旨
English Chapter 1Hardware Installation 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the computer and unplug its power cord. 2. When handling the motherboard, avoid touching any metal leads or connectors. 3. It is best to wear an electrostatic d
ページ10に含まれる内容の要旨
1-2 Feature Summary Motherboard GA-8IPE1000-G or GA-8IPE1000-L or GA-8IPE1000 ® ® CPU Socket 478 for Intel Pentium 4 (Northwood, Prescott) with HT Technology Supports 800/533/400MHz FSB L2 cache varies with CPU ® Chipset Northbridge: Intel 865PE Chipset ® Southbridge: Intel ICH5 (Note) Memory 4 DDR DIMM memory slots (supports up to 4GB memory) Supports dual channel DDR 400/333/266 DIMM Supports 2.5V DDR DIMM Slots 1 AGP slot supports 8X/4X(1.5V) mode 5 PCI slots IDE Connections 2 ID
ページ11に含まれる内容の要旨
English I/O Control SMSC LPC47M997-NR Hardware Monitor System voltage detection CPU temperature detection CPU / System fan speed detection BIOS Use of licensed AWARD BIOS Supports Q-Flash Additional Features Supports @BIOS Supports EasyTune 5 Overclocking Over voltage via BIOS (CPU/ AGP/ DDR) Over clock via BIOS (CPU/ AGP/ DDR/ PCI) Form Factor ATX form factor; 30.5cm x 22cm - 11 - Hardware Installation
ページ12に含まれる内容の要旨
1-3 Installation of the CPU and Heatsink Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and heatsink. 4. Please make sure the heatsink is installed
ページ13に含まれる内容の要旨
English 1-3-2 Installation of the Heatsink Fig.1 Before installing the heat sink, please first add an even layer of heat sink paste on the surface of the CPU. Install all the heat sink components (Please refer to the heat sink manual for detailed installation instructions). Fig.2 Please connect the heat sink power connector to the CPU_FAN connector located on the motherboard so that the heat sink can properly function to prevent CPU overheating. The heat sink may adhere to the CPU as a result o
ページ14に含まれる内容の要旨
1-4 Installation of Memory Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory module can be installed in only o
ページ15に含まれる内容の要旨
English Dual Channel DDR GA-8IPE1000 Series supports the Dual Channel Technology. After operating the Dual Channel Technology, the bandwidth of Memory Bus will add double up to 6.4GB/s(DDR400) or 5.3GB/s(DDR333). GA-8IPE1000 Series includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel A : DDR 1, DDR 2 Channel B : DDR 3, DDR 4 If you want to operate the Dual Channel Technology, please note the following explanations due to the limitation of Intel chipset specificati
ページ16に含まれる内容の要旨
1-5 Installation of Expansion Cards You can install your expansion card by following the steps outlined below: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot bracket of
ページ17に含まれる内容の要旨
English 1-6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). USB port Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip, speaker...etc. have a standard USB interface. Also make sure your OS supports USB controller. If your OS does not support USB controller, please contac
ページ18に含まれる内容の要旨
1-7 Connectors Introduction 13 2 12 11 9 19 7 13 5 16 4 17 14 18 6 15 8 10 1) ATX_12V 11) F_AUDIO 2) ATX (Power Connector) 12) CD_IN 3) CPU_FAN 13) SUR_CEN 4) SYS_FAN 14) SPDIF_IO 5) FDD 15) F_USB1 / F_USB2 6) IDE1 / IDE2 16) IR 7) SATA0 / SATA1 17) GAME 8) PWR_LED 18) INFO_LINK 9) BATTERY 19) CLR_CMOS 10) F_PANEL GA-8IPE1000 Series Motherboard - 18 - English
ページ19に含まれる内容の要旨
English 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will
ページ20に含まれる内容の要旨
3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Please remember to connect the power to the cooler to prevent system overheating and failure. Caution!
