ページ1に含まれる内容の要旨
USER'S MANUAL
Of
Intel G41 Express Chipset
&
Intel ICH7 Chipset
Based
M/B for LGA 775 Quad Core Ready
Intel Core Processor Family
PMG41-D2
MB: Rev: 1.0
Manual: Rev: EG100
Release date: Nov., 2009
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
ページ2に含まれる内容の要旨
TABLE OF CONTENT CHAPTER 1 INTRODUCTION OF INTEL G41 MOTHERBOARD SERIES 1-1 FEATURES OF MOTHERBOARD .................................................................................... 1 1-1.1 SPECIAL FEATURES OF MOTHERBOARD....................................................2 1-2 SPECIFICATI
ページ3に含まれる内容の要旨
Chapter 1 Introduction of Intel G41 Motherboard Series 1-1 Features of motherboard The Intel G41 chipset motherboard series are based on the latest Intel G41 Express Chipset and Intel ICH7 Chipset technology which supports the innovative 65nm and 90nm Intel® Pentium® 4 Processor， Celeron 4xx Processor, Dua
ページ4に含まれる内容の要旨
1-1.1 Special Features of Motherboard CPU Thermal Throttling Technology---(The CPU Overheat Protection Technology) To prevent the increasing heat from damage of CPU or accidental shutdown while at high workload, the CPU Thermal Throttling Technology will force CPU to enter partially idle mode from 87.
ページ5に含まれる内容の要旨
1-2 Specification Spec Description Design Micro ATX form factor 4 layers PCB size: 24.5*18cm Intel G41 Memory Controller Hub (MCH) Chipset Chipset Intel 82801GB I/O Controller Hub (ICH7) Chipset Support 45nm and 65nm Quad-Core, Dual-Core Intel® Core 2 Quad, Core 2 Duo processors, Intel® Pentium Du
ページ6に含まれる内容の要旨
1-3 Item Checklist Intel G41 Platform Processor Chipset based motherboard Cable for IDE CD for motherboard utilities Cable for Serial ATA Port Intel G41 Platform Processor Chipset motherboard User’s Manual Back panel 1-4 Layout Diagram & Jumper Setting KB／MS Power ON Jumper (JP1) CPU
ページ7に含まれる内容の要旨
Chapter 2 Hardware Installation 2-1 Install LGA 775 Supported Intel Processor This motherboard provides a 775-pin surface mount, LGA775 Land Grid Array socket, referred to as the LGA775 socket supports Intel Pentium 4 processor in the 775 Pin package utilizes Flip-Chip Land Grid Array (FC-LGA) package te
ページ8に含まれる内容の要旨
1. One DIMM Module ----Plug in DIMM1 2. Two DIMM Modules---Plug in DIMM1 and DIMM2 for Dual channel function For Dual channel Limited! 3. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 & DIMM2 4. DIMM1 & DIMM2 must be the same type, same size, and same frequency for dua
ページ9に含まれる内容の要旨
2-3 Expansion Cards The G41 motherboard series offer one PCI-Express x16 graphics slot of 8Gbyte/sec data transfer rate at each relative direction which gets 7 times of bandwidth more than AGP 8X and it’s up to a peak concurrent bandwidth of 16Gbyte/sec at full speed to guarantee the ultimate GPU computing
ページ10に含まれる内容の要旨
Chapter 3 Connectors, Headers & Jumpers Setting 3-1 Connectors (1) Power Connector (24-pin block): ATXPWR ATX Power Supply connector: ROW1 ROW2 This is a new defined 24-pins PIN ROW1 ROW2 connector that usually comes with ROW1 ROW2 1 3.3V 3.3V ATX case. The ATX Power Supply 2 3.3V -1
ページ11に含まれる内容の要旨
(6) Audio Line-In, Lin-Out, MIC Connector: SURROUND1 This Connector is 3 phones Jack for LINE-OUT, LINE-IN, and MIC Audio output to speaker Line-out: (GREEN) Line-in: (BLUE) Audio input to sound chip MIC: (PINK) Microphone Connector PS/2 Line-IN Mouse LAN COM Line-
ページ12に含まれる内容の要旨
ID IDE E1 1 Pin 1 Primary IDE Connector (9) Serial-ATA Port connector: SATA1 / SATA2 / SATA3/ SATA4 • These connectors support the provided Serial ATA and Serial ATA2 IDE hard disk cable to connecting the motherboard and serial ATA hard disk. SATA4 SATA3 SATA2
ページ13に含まれる内容の要旨
3-2 Headers (1) Line-Out/MIC Header for Front Panel (9-pin): AUDIO This header is connected to Front Panel Line-out, MIC connector with cable. AUDIO 2 10 Pin 1 9 Line-Out, MIC Headers (2) USB Port Headers (9-pin) : USB2 / USB3 These headers are used for connecting the additio
ページ14に含まれる内容の要旨
(7) Power switch: PWR BTN This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system. PWRLED Pin 1 JW FP SPEAK Pin 1 Pin 1 System Case Connections (8) FAN Power Headers: SYSFAN1, SYSFAN2 (3-pin), CPUFAN (4-pin) These connectors support cooling fans of 350
ページ15に含まれる内容の要旨
(10) Parallel Port header (25-pin): PARALLEL The On-board Parallel Port can be disabled through the BIOS SETUP. . Pin 1 PARALLEL Connector (11) SPDIF Out header: SPDIF Out The SPDIF output is capable of providing digital audio to external speakers or compressed AC3
ページ16に含まれる内容の要旨
Chapter 4 DRIVER & FREE PROGRAM INSTALLATION Check your package and there is A CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DR
ページ17に含まれる内容の要旨
Windows XP Windows 2000 From MENU you may make as selections: 1. INF install Intel INF chipset system driver 2. VGA install VGA chipset driver 3. LAN install LAN Driver 4. SOUND install Audio driver 5. BROWSE CD to browse the contents of the CD 15
ページ18に含まれる内容の要旨
4-1 INF: Install Intel INF Chipset System Driver Windows VISTA/ 7 Windows XP Windows 2000 16
ページ19に含まれる内容の要旨
4-2 VGA: VGA Driver Windows VISTA/ 7 Windows XP Windows 2000 17
ページ20に含まれる内容の要旨
4-3 LAN: LAN Driver Windows VISTA/ 7 Windows XP Windows 2000 18
