ページ1に含まれる内容の要旨
™
ThinkCentre
Hardware Maintenance Manual
Types 8128, 8185, 8186, 8187, 8188, 8189,
Types 8190, 8192, 8193, 8194, 8195, 8196,
Types 8197, 8413, 8414, 8415, 8430, 8431
Types 8432, 8433
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
™ ThinkCentre Hardware Maintenance Manual Types 8128, 8185, 8186, 8187, 8188, 8189, Types 8190, 8192, 8193, 8194, 8195, 8196, Types 8197, 8413, 8414, 8415, 8430, 8431 Types 8432, 8433
ページ4に含まれる内容の要旨
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 281. Ninth Edition (February 2005) INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION ″AS IS″ WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE LIMITED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimers or express or implied warranties
ページ5に含まれる内容の要旨
Contents Types 8185, 8186, 8192, 8413, and 8430 . . . .34 Chapter 1. About this manual . . . . .1 Types 8128, 8187, 8188, 8193, 8414, and 8431 . .35 Important Safety Information . . . . . . . . .1 Types 8189, 8190, 8194, 8195, 8415, 8432, and 8433 36 Types 8196 and 8197 . . . . . . . . . .37 Chapter 2. General information . . . . .3 Identifying parts on the system board (all machine Features . . . . . . . . . . . . . . . .3 types) . . . . . . . . . . . . . . . .38 Physical spe
ページ6に含まれる内容の要旨
Security features . . . . . . . . . . . . 111 Type 8190 . . . . . . . . . . . . . . 172 Passwords . . . . . . . . . . . . . 111 Type 8192 . . . . . . . . . . . . . . 178 Vital product data . . . . . . . . . . .112 Type 8193 . . . . . . . . . . . . . . 180 BIOS levels . . . . . . . . . . . . . .112 Type 8194 . . . . . . . . . . . . . . 188 Erasing a lost or forgotten password (clearing Type 8195 . . . . . . . . . . . . . . 202 CMOS) . . . . . . . . . . . . . . .113 Type 8196 . .
ページ7に含まれる内容の要旨
Chapter 1. About this manual ® This manual contains service and reference information for IBM computer Types 8128, 8185, 8186, 8187, 8188, 8189, 8190, 8192 8193, 8194, 8195, 8196, 8197, 8413, 8414, 8415, 8430, 8431 8432, and 8433. This manual is divided into product service sections and a related service section, as follows: v The product service sections include procedures for isolating problems to a FRU, a Symptom-to-FRU Index, additional service information and an illustrated part
ページ8に含まれる内容の要旨
Leia todas as instruções de cuidado e perigo antes de executar qualquer operação. Lea atentamente todas las declaraciones de precaución y peligro ante de llevar a cabo cualquier operación. 2 Hardware Maintenance Manual
ページ9に含まれる内容の要旨
Chapter 2. General information ® This IBM computer incorporates many of the latest advances in computer technology. Go to Access IBM for general information about the use, operation, and maintenance of the computer. Access IBM also contains information to help solve problems and get repair service or other technical assistance. Features This section provides an overview of the computer features and preinstalled software. Microprocessor (varies by model type) ® ™ v Intel Celeron (
ページ10に含まれる内容の要旨
v System Management (SM) BIOS and SM software v Ability to store POST hardware test results Input/output features v 25-pin, Extended Capabilities Port (ECP)/Extended Parallel Port (EPP) v 9-pin serial connector v Eight 4-pin, USB connectors (two on front panel and six on rear panel) ® v PS/2 mouse connector v PS/2 keyboard connector v Ethernet connector v VGA monitor connector v Three audio connectors (line in, line out, and microphone) Expansion v Empty drive
ページ11に含まれる内容の要旨
1 Operating systems (tested for compatibility) ® v Microsoft Windows NT Workstation Version 4.0 v Microsoft Windows 98 Second Edition Physical specifications This section details the physical specifications for each computer Type. 1.The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with the computer following the publication of this booklet. Correction
ページ12に含まれる内容の要旨
Types 8185, 8186, 8192, 8413, and 8430 This section lists the physical specifications for the computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 104 mm (4.1 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 360 mm (14.2 in.) Maximum configuration: 683 Btu/hr (200 watts) Depth: 412 mm (16.2 in.) Airflow Weight Approximately 0.45 cubic meters per minute (16 cubic feet Minimum configuration as shipped: 8.1 kg (
ページ13に含まれる内容の要旨
Types 8128, 8187, 8188, 8193, 8414, and 8431 This section lists the physical specifications for the computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 140 mm (5.5 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 425 mm (16.7 in.) Maximum configuration: 785 Btu/hr (230 watts) Depth: 425 mm (16.7 in) Airflow Weight Approximately 0.51 cubic meters per minute (18 cubic feet Minimum configuration as shipped: 10.
ページ14に含まれる内容の要旨
Types 8189, 8190, 8194, 8195, 8415, 8432, and 8433 This section lists the physical specifications for the computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 413 mm (16.25 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 191 mm (7.5 in.) Maximum configuration: 785 Btu/hr (230 watts) Depth: 406 mm (16 in.) Airflow Weight Approximately 0.68 cubic meters per minute (24 cubic feet Minimum configuration as shippe
ページ15に含まれる内容の要旨
Types 8196 and 8197 This section lists the physical specifications for the computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 398 mm (15.67 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 180 mm (7.08 in.) Maximum configuration: 785 Btu/hr (230 watts) Depth: 402 mm (15.82 in.) Airflow Weight Approximately 0.68 cubic meters every minute (24 cubic feet Minimum configuration as shipped: 7.6 kg (16.8 lb) ever
ページ16に含まれる内容の要旨
10 Hardware Maintenance Manual
ページ17に含まれる内容の要旨
Chapter 3. General Checkout Note: The fans in this system may turn off under normal operation. This is a noise-level reduction feature, and should not be taken to mean there is something wrong with the system. The following tools are available to help identify and resolve hardware-related problems. v IBM Setup Utility program v Power-On Self-Test (POST) – POST Beep Codes – Error Code Format v IBM Enhanced Diagnostics program v Product recovery utility – Factory Conten
ページ18に含まれる内容の要旨
001 1. Power-off the computer and all external devices. 2. Make sure that all external cables and power cords are properly connected. 3. Remove the cover and make sure that all cables to the system board are seated properly. 4. Set all monitor controls to the middle position. 5. Power-on all external devices. 6. Power-on the computer. 7. Check the power-on indicator and listen for the fan(s). DID THE COMPUTER POWER-ON AND STAY ON? YES, continue to 002. NO, go to “Un
ページ19に含まれる内容の要旨
v If the test stops and you cannot continue, replace the last device tested. 006 IS A POST ERROR CODE DISPLAYED? If YES, go to “POST error codes” on page 92. If NO, continue to 007. 007 1. Power-off the computer. 2. Press and hold the F1 key and power-on the computer to start the IBM Setup Utility program (see Chapter 5, “IBM Setup Utility program,” on page 19). Release the F1 key when you hear beeps. 3. Select Exit, Load Default Settings, and Save and exit the Setup Uti
ページ20に含まれる内容の要旨
14 Hardware Maintenance Manual
