ページ1に含まれる内容の要旨
IBM
Hardware Maintenance Manual
Types 6826, 8317, 8318, and 8319
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
IBM Hardware Maintenance Manual Types 6826, 8317, 8318, and 8319
ページ4に含まれる内容の要旨
Note: Before using this information and the product it supports, be sure to read the general information under “Notices”on page143. Second Edition (December 2002) INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION ″AS IS″ WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE LIMITED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimers or express or implied warranties in certain
ページ5に含まれる内容の要旨
Contents Power supply .............34 Chapter 1. About this manual ..... 1 Important Safety Information.........1 Chapter 7. Symptom-to-FRU Index . . . 37 Hard disk drive boot error .........37 Chapter 2. General Checkout...... 3 Power Supply Errors...........37 Diagnostic error codes...........39 Chapter 3. General information..... 5 Beep symptoms.............57 Features................5 No-beep symptoms............59 Specifications..............7 POST error codes ............60 Available optio
ページ6に含まれる内容の要旨
iv Hardware Maintenance Manual
ページ7に含まれる内容の要旨
Chapter 1. About this manual ® This manual contains service and reference information for IBM computer Types 6826, 8317, 8318, and 8319. This manual is divided into product service sections and a related service section, as follows: v The product service sections include procedures for isolating problems to a FRU, a Symptom-to-FRU Index, additional service information and an illustrated parts catalog. v The related service section includes safety notices and safety information, and problem deter
ページ8に含まれる内容の要旨
Leia todas as instruções de cuidado e perigo antes de executar qualquer operação. Lea atentamente todas las declaraciones de precaución y peligro ante de llevar a cabo cualquier operación. 2 Hardware Maintenance Manual
ページ9に含まれる内容の要旨
Chapter 2. General Checkout This general checkout procedure is for Type 6826, 8317, 8318, and 8319 computers. Attention: The drives in the computer you are servicing might have been rearranged or the drive startup sequence changed. Be extremely careful during write operations such as copying, saving or formatting. Data or programs can be overwritten if you select an incorrect drive. Diagnostic error messages appear when a test program finds a problem with a hardware option. For the test programs
ページ10に含まれる内容の要旨
If NO, continue to 002. If YES, proceed to 003. 002 If the Power Management feature is enabled, do the following: 1. Start the Configuration/Setup Utility program (see “IBM Setup Utility program”on page9) 2. Select Power Management from the Configuration/Setup Utility program menu. 3. Select APM. 4. Be sure APM BIOS Mode is set to Disabled. If it is not, press Left Arrow (})or Right Arrow (Æ) to change the setting. 5. Select Automatic Hardware Power Management. 6. Set Automatic Hardware Po
ページ11に含まれる内容の要旨
Chapter 3. General information ® This IBM computer incorporates many of the latest advances in computer technology and can be upgraded as needs change. Adding hardware options to a computer is an easy way to increase its capabilities. Instructions for installing external and internal options are included in this publication. When adding an option, use these instructions along with the instructions that come with the option. Features This section provides an overview of the computer features and
ページ12に含まれる内容の要旨
v Remote Administration v Automatic power-on startup v System Management (SM) BIOS and SM software v Ability to store POST hardware test results Input/output features v 25-pin, Extended Capabilities Port (ECP)/Extended Parallel Port (EPP) v Two 9-pin serial connectors v Six 4-pin, USB connectors (four on front panel and two on rear panel) ® v PS/2 mouse connector v PS/2 keyboard connector v Ethernet connector v VGA Monitor connector v Three audio connectors (line in, line out, and microphone) on
ページ13に含まれる内容の要旨
Specifications This section lists the specifications for the computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Width: 12.2 inches (309 mm) Minimum configuration: 257 Btu/hr (75 watts) Height: 3.3 inches (84 mm) Maximum configuration: 463 Btu/hr (135 watts) Depth: 13.6 inches (345 mm) Airflow Weight Approximately 0.23 cubic meters per minute Minimum configuration as shipped: 7.4 kg (16.2 lbs) Acoustical noise-emission values Environment Note: In this computer
ページ14に含まれる内容の要旨
Available options The following are some available options: v External options – Parallel port devices, such as printers and external drives – Serial port devices, such as external modems and digital cameras – Audio devices, such as external speakers for the sound system – USB devices, such as printers, joysticks, and scanners – Security device, such as a cable lock – Monitors v Internal options – System memory, called dual inline memory modules (DIMMs) – Peripheral component interconnect (PCI)
ページ15に含まれる内容の要旨
Chapter 4. Diagnostics The following tools are available to help identify and resolve hardware-related problems. v Setup Utility program v Power-On Self-Test (POST) – POST Beep Codes – Error Code Format v Diagnostics program v Recovery utility – Factory Contents – Partial recovery v Repair utility IBM Setup Utility program The IBM Setup Utility program is stored in the electrically erasable programmable read-only memory (EEPROM) of your computer. The IBM Setup Utility program is used to view and
ページ16に含まれる内容の要旨
of the first IBM Setup Utility screen is shown here. 831941x 28KT10AUS 2810A IBM 1234567 02/22/02 [13:34:25] [02/22/2002] The IBM Setup Utility program menu lists items that identify system configuration topics. When working with the IBM Setup Utility program menu, you must use the keyboard. The keys used to perform various tasks are displayed at the bottom of each screen. When you finish viewing or changing settings, press Esc to return to the IBM Setup Utility program menu (you might have to p
ページ17に含まれる内容の要旨
Product Recovery Program menu Type 6826, 8317, 8318, and 8319 machines have recovery and diagnostics programs on a separate hard drive partition. The Enhanced Diagnostics diskette is not shipped with the machine. To download the Diagnostics program, see “Diagnostics program download” on page 12. At startup, the machine displays the following prompt: To start the Product Recovery Program, press F11 Attention: Make sure all data is backed up to avoid loss when the Product Recovery program is used.
ページ18に含まれる内容の要旨
Diagnostics The Diagnostics program uses a full range of diagnostic utilities to determine the operating condition of the computer’s hardware components. For a complete list of error codes and messages, see ″Symptom-to-FRU Index″ on page 37. Diagnostics program download To download the Diagnostics program, do the following: v Go to http://www.pc.ibm.com/support/us/. v Search for the machine Type and model in the ″Quick path to a product″ box on the left. v Select Downloadable Files from the opto
ページ19に含まれる内容の要旨
Test results Diagnostics test results will produce the following error code format: Function Failure Type DeviceID Date ChkDigits Text Code v Function Code: Represents the feature or function within the PC. v Failure Type: Represents the type of error encountered. v DeviceID: Contains the component’s unit-ID which corresponds to either a fixed disk drive, removable media drive, serial or parallel port, processor, specific RIMM, or a device on the PCI bus. v Date: Contains the date on which the d
ページ20に含まれる内容の要旨
– Random Verify v Surface Scan Tests: - checks the drive media for defects. – Surface Scan (Linear) – Surface Scan (Aggressive) - this is disabled for normal customer use. – Surface Scan (Random) v SMART: - checks the SMART functionality for drives that support SMART. – Start SMART Self-Test – Get SMART test results Other Test Features: v Write-Splice Repair - detects and corrects Error Correction Code errors during Verify tests. v Auto Spin Down - a gradual spin down of the drive platters to av
