ページ1に含まれる内容の要旨
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X(1.5V) notch"(show below), please make sure your AGP
card is AGP 4X(1.5V).
®
Caution: AGP 2X(3.3V) card is not supported by Intel 845(GE/PE) /
845(E/G) / 850(E). You might experience system unable to boot up
normally. Please insert an AGP 4X(1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP
ページ2に含まれる内容の要旨
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of theirrespective owners. Please do not remove any labels on motherboard, thismay void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
ページ3に含まれる内容の要旨
Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-8PE667 Ultra2 / GA-8PE667 Pro is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances i
ページ4に含まれる内容の要旨
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible PartName: G.B.T. INC. (U.S.A.) Address: 17358 Railroad Street City of Industry, CA 91748 Phone/Fax No:(818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard Model Number: GA-8PE667 Ultra2 / GA-8PE667 Pro Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109 (a),Class B Digital Device Supplementary Information: This device complies with part
ページ5に含まれる内容の要旨
GA-8PE667 Ultra2 / Pro P4 Titan 667 Motherboard USER'S MANUAL ® Pentium 4 Processor Motherboard Rev. 1201 12ME-8PE667U2-1201
ページ6に含まれる内容の要旨
Table of Content Item Checklist ..........................................................................................4 WARNING! ..............................................................................................4 Chapter 1 Introduction .............................................................................5 Features Summary ....................................................................................... 5 GA-PE667 Ultra 2 / Pro Motherboard Layout ....................
ページ7に含まれる内容の要旨
English Power Management Setup ......................................................................... 49 PnP/PCI Configurations ............................................................................. 52 PC Health Status ........................................................................................ 53 Frequency/Voltage Control ......................................................................... 55 Top Performance ............................................................
ページ8に含まれる内容の要旨
Item Checklist The GA-8PE667 Ultra2 /Pro motherboard IDE cable x1 / Floppy cable x 1 * CD for motherboard driver & utility IDE cable x3 / Floppy cable x 1 ** GA-8PE667 Ultra2 /Pro user's manual 4 Port USB Cable x 1 Quick PC Installation Guide SATA cable x2 ** RAID Manual ** Audio combo kit x1 ** SATA RAID Manual ** SPDIF Kit x1(SPD-KIT) * Motherboard Settings Label I/O Shield GC-SATA Card (Optional) ** (Manual ; SATA cable x1 ; Power cable x 1) Computer motherboards and expansi
ページ9に含まれる内容の要旨
English Chapter 1 Introduction Features Summary Form Factor 30.5cm x 24.4cm ATX size form factor, 4 layers PCB. Motherboard GA-8PE667 Series Motherboard: GA-8PE667 Ultra2 and GA-8PE667 Pro ® ® CPU Socket 478 for Intel Micro FC-PGA2 Pentium 4 processor ® Intel Pentium 4 533MHz/400MHz FSB ® ® Support Intel Pentium 4 (Northwood, 0.13 m) processor ® ® Support Intel Pentium 4 Processor with HT Technology 2nd cache depend on CPU Chipset Chipset 845PE HOST/AGP/Controller ICH4 I/O Contro
ページ10に含まれる内容の要旨
Hardware Monitor CPU/Power/System Fan Revolution detect CPU/Power/System Fan Control CPU Overheat Warning System Voltage Detect On-Board Sound Realtek ALC650 CODEC Line Out / 2 front speaker Line In / 2 rear speaker(by s/w switch) Mic In / center& subwoofer(by s/w switch) SPDIF out / SPDIF In CD In / AUX In / Game port On-Board RAID ** Onboard Promise PDC20276 Supports data striping (RAID 0) or mirroring (RAID 1) Supports concurrent dual ATA133 IDE controller operation Support ATAP
ページ11に含まれる内容の要旨
English PS/2 Connector PS/2 Keyboard interface and PS/2 Mouse interface BIOS Licensed AWARD BIOS, 4M bit x 2 FWH ** Licensed AWARD BIOS, 3M bit x 2 FWH * Supports Dual BIOS Supports Multi Language Supports Face Wizard Supports Q-Flash Additional Features PS/2 Keyboard power on by password PS/2 Mouse power on External Modem wake up STR(Suspend-To-RAM) Wake on LAN (WOL) AC Recovery Poly fuse for keyboard over-current protection USB KB/Mouse wake up from S3 Supports @BIOS Supports
ページ12に含まれる内容の要旨
GA-8PE667 Ultra2 / Pro Motherboard Layout KB_MS RAM_LED ATX_12V SOCKET478 F_AUDIO NB-FAN CD_IN Intel 845PE 2X_DET Kinnereth-R* AGP Kenai-32** P4 Titan667 PCI1 SPDIF_O PCI2 ICH4 AUX_IN BATTERY PCI3 BACKUP MAIN AC97 BIOS BIOS SPDIF_IN PCI4 PDC20276** IDE4** SUR_CEN PCI5 IDE3** PCI6 SIL3112A** WOL ITE8712 S_ATA1** F_PANEL CNR** S_ATA2** F_USB2 F_USB1 Serial ATA** Front USB 2.0 * For GA-8PE667 Pro Only ** For GA-8PE667 Ultra2 Only GA-8PE667 Ultra2 / Pro Motherboard - 8 - English LINE_OUT MIC_IN USB
ページ13に含まれる内容の要旨
English Block Diagram CPUCLK+/-(100/133MHz) Pentium 4 CPU AGP 4X System Bus AGPCLK 400/533MHz (66MHz) DDR RAM 266/333 MHz Intel GMCHCLK+/-(66MHz) 82845PE MCHCLK+/-(100/133MHz) 6 PCI 66 MHz 33 MHz 14.318 MHz 48 MHz Kenai-32** Kinnereth-R* BIOS Game Port LPC BUS Intel Floppy ICH 4 ITE8712 LPT Port Promise** PDC20276 PS/2 24 MHz KB/Mouse 33 MHz Serial ATA** PCICLK SCR (33MHz) ATA33/ 6 USB COM 66/100 (2.0/1.1) Ports ATA133/RAID** IDE Channels Ports IDE Channels MIC 6-channel Serial ATA** LINE-IN C
ページ14に含まれる内容の要旨
GA-8PE667 Ultra2 / Pro Motherboard - 10 - English
ページ15に含まれる内容の要旨
English Chapter 2 Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires, and power supply Step1 Step4 Step 2 Step 4 Step 4 Step 4 Step3 Congratulations you have accomplished the hardware installation! Turn on the power supply or connect the power cable to the power outlet. Continue with the BIOS/so
ページ16に含まれる内容の要旨
Step 1: Install the Central Processing Unit (CPU) Before installing the processor , adhere to the following warning: If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation. Please make sure the CPU type is supported by the motherboard. Step 1-1: CPU Installation Angling the Socket 0 rod to 65 Actuation Lever 2. Pull the rod to the 90-degree directly. 1. Angling the rod to 65-degree maybe feel a kind of tight , and
ページ17に含まれる内容の要旨
English Step 1-2 : CPU Heat Sink Installation Before installing the CPU Heat Sink , adhere to the following warning: 1.Please use Intel approved cooling fan. 2.We recommend you to apply the thermal tape to provide better heat conduction between your CPU and heatsink. (The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste. During this condition if you try to remove the cooling fan, you might pull the processor out of the CPU socket alone with the cooling fan, and mi
ページ18に含まれる内容の要旨
Step 2: Install memory modules Before installing the processor and heatsink, adhere to the following warning: When DIMM LED is ON, do not install/remove DIMM from socket. Please note that the DIMM module can only fit in one direction due to the one notches. Wrong orientation will cause improper installation. Please change the insert orientation. The motherboard has 3 dual inline memory module (DIMM) sockets, but it can only support a maxi- mum of 4 banks of DDR memory. DDR sockets 1 uses 2 banks
ページ19に含まれる内容の要旨
English 1. The DIMM slot has a notch, so the DIMM memory module can only fit in one direction. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it down. 3. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module. Reverse the installation steps when you wish to remove the DIMM module. DDR Introduction Established on the existing SDRAM industry infrastructure, DDR (Double Data Rate) memory is a high performance and cost-effective solution that allows
ページ20に含まれる内容の要旨
Step 3: Install expansion cards 1. Read the related expansion card’s instruction document before install the expansion card into the computer. 2. Remove your computer’s chassis cover, necessary screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot bracket of the expansion card. 6. Replace your computer’s chassis cover. 7. Pow
