ページ1に含まれる内容の要旨
DESKPOWER E623 User’s Manual
Fujitsu endeavours to ensure that the information in this document is correct, but accepts no liability
for any error or omission in the same. Any procedures described in this document for operating Fujitsu
products should be read and understood by the operator before such products are used. To ensure
that Fujitsu products function without risk to safety and health, such procedures should be strictly
observed by the operator. The development of Fujitsu products and s
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions carefully. Save these instructions for future reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and ope
ページ3に含まれる内容の要旨
13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result
ページ4に含まれる内容の要旨
Before Reading this Manual This section describes safety precautions and convention used in this manual. Be sure to read this. For Safe Operation This manual contains important information for using the DESKPOWER personal computer. Read this manual thoroughly before using your PC. In particular, “Safety Precautions” in this manual must be read and understood. This manual including “Safety Precautions” must be readily available at all times. This equipment is compliant with the PC industry standa
ページ5に含まれる内容の要旨
Using this Product for High-Safety Applications This product is for office, personal, home, ordinary industry and other general use. It is not designed and manufactured for use in high-safety applications. Do not use this product for such applications without taking measures to satisfy the high-safety requirements. High-safety applications require extremely high level of safety, and involve serious hazards to life and health if the required safety is not assured. High-safety applications include
ページ6に含まれる内容の要旨
Microsoft Service Pack ® ® Microsoft Corp. offers Service Pack to provide the users of Microsoft Windows with more stable system operation (http://www.microsoft.com/). ® The latest version of the Service Pack helps you configure the most stable system using Microsoft ® Windows provided at that time by Microsoft Corp. We recommend you to use the latest version. In some environments, however, the Service Pack may cause unexpected failure. Read Readme.txt for the Service Pack before use. Again, we
ページ7に含まれる内容の要旨
Conventions Used in this Manual Introduction This manual tells you how to put your PC into operation and how to operate it in daily use. Depending on the configuration level chosen some of the hardware components described may not be available on your PC. Please observe the notes on your operating system. You can incorporate operable drives (for example DAT drive) as well as other boards. Depending on the configuration selected, the operating system is preinstalled on your hard disk (e.g. Window
ページ8に含まれる内容の要旨
Important Notes In this chapter you will find information regarding safety which is essential to take note of when working with your PC. The manufacturer's notes contain helpful information on your PC. Safety CAUTION During installation and before operating the device, please observe the instructions on environmental conditions in the chapter entitled "Technical data" as well as the instructions in the chapter "Preparing for Use". Please check whether the device is correctly set for the local
ページ9に含まれる内容の要旨
FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference- Causing Equipment Regulations. These limits are designed to provide reasonable
ページ10に含まれる内容の要旨
Transporting the PC CAUTION Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site. Do not unpack them until all transportation manoeuvres are completed. Never drop the monitor! Cleaning the PC CAUTION Turn off all power and equipment switches and remove the power plug from the mains supply. Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that co
ページ11に含まれる内容の要旨
Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner. Do not throw lithium batteries into the household waste. They must be disposed of in
ページ12に含まれる内容の要旨
Warning and Caution Labels Your PC bears the warning and caution labels as shown below. The warning and caution labels must not be removed or damaged. Rear of the PC main unit DESKPOWER E623 MODEL FPC–E623 NRTL/C 100-127V (8.0A) /200-240V (4.0A) 50/60Hz MADE IN SINGAPORE By Fujitsu Limited, Japan (M) To prevent electric shock, WARNING switch off the PC and connected peripherals and Electric shock unplug power cords from respective outlets before disassembling the unit and installing a buil
ページ13に含まれる内容の要旨
Organization of This Manual Before Reading This Manual This section contains cautions for safe operation, representations and symbols used in this manual. Be sure to read this first! Chapter 1 Preparing for Use This chapter provides the names and functions of individual parts. Chapter 2 Operation This section describes the location of installation and installation of the computer. Chapter 3 Troubleshooting and Tips This chapter provides the basic information on the PC and operation. Chapter 4 Sy
ページ14に含まれる内容の要旨
Contents CHAPTER 1 Preparing for Use Preparing for Use ..............................................................................2 Unpacking and Checking the Delivery ............................................................. 2 Steps for Initial Setup ....................................................................................... 2 Setting Up the PC ............................................................................................ 3 Installing the Feet ..................
ページ15に含まれる内容の要旨
CHAPTER 1 Preparing for Use Kobe 1(01-8) 1 13/7/04, 1:57 PM
ページ16に含まれる内容の要旨
Preparing for Use CAUTION Please take note of the safety information in the "Important notes" chapter. Unpacking and Checking the Delivery It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date. Unpack all the individual parts. Check the delivery for damage incurred during transportation. Check whether the delivery agrees with the details in the delivery note. Should you discover that the delivery does not correspond to
ページ17に含まれる内容の要旨
Setting Up the PC CAUTION When installing your PC, give consideration to the recommendations and safety notes. Set up the PC only in its correct orientation. The points to observe are illustrated on the following pages. Do not expose the PC to extreme environmental conditions and protect it from dust, humidity and heat. When installing the PC, provide sufficient clearance around the PC, as indicated in the “Technical data” chapter to ensure adequate ventilation. In order to avoid overheating,
ページ18に含まれる内容の要旨
Vertical positioning When two feet (double) are used When this personal computer is vertically installed away from a wall, install the feet with the following steps. 1 Align the feet to the width of the main unit of the personal computer. 2 Install the feet on the main unit of the personal computer. Secure them in the screw holes on the back of the feet with screws. 4 Kobe 1(01-8) 4 13/7/04, 1:57 PM
ページ19に含まれる内容の要旨
When one foot (single) is used When this personal computer is vertically installed on a wall, install it with the following steps. 1 Disassemble the foot. 2 Install the disassembled foot on the main unit of the personal computer. Secure it in the screw hole on the back of the foot with a screw. 5 Kobe 1(01-8) 5 13/7/04, 1:57 PM
ページ20に含まれる内容の要旨
Horizontal positioning 1 Disassemble the foot. 2 Place the main unit of the personal computer on the disassembled foot. 6 Kobe 1(01-8) 6 13/7/04, 1:57 PM
