ページ1に含まれる内容の要旨
Condensed USER MANUAL FOR:
SmartModule Express
SMX945
Nordstrasse 11/F
CH - 4542 Luterbach
Tel.: ++41 (0)32 681 58 00
Fax: ++41 (0)32 681 58 01
Email: support@digitallogic.com
Homepage: http://www.digitallogic.com
ページ2に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A For internal use only: File: SMX945_Condensed_V1.0A.doc Path: R:\HANDBUCH\smart\SMX945\SMX945_Condensed_V1.0A.doc COPYRIGHT 2007 BY DIGITAL-LOGIC AG This publication is protected by copyright and all rights are reserved. No part of this document may be reproduced, transmitted, transcribed or stored in a retrieval system, in any form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior writte
ページ3に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A Table of Contents 1. PREFACE.....................................................................................................................................................4 1.1. Trademarks ..................................................................................................................................... 4 1.2. Disclaimer ...................................................................................................
ページ4に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 1. PREFACE The information contained in this manual has been carefully checked and is believed to be accurate; it is subject to change without notice. Product advances mean that some specifications may have changed. DIGITAL-LOGIC AG assumes no responsibility for any inaccuracies, or the consequences thereof, that may appear in this manual. Furthermore, DIGITAL-LOGIC AG does not accept any liability arising from the use or application of any
ページ5に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 1.5. Recycling Information All components within this product fulfill the requirements of the RoHS (Restriction of Hazardous Substances Directive). The product is soldered with a lead free process. 1.6. Technical Support 1. Contact your local DIGITAL-LOGIC Technical Support, in your country. 2. Use the Internet Support Request form at http://support.digitallogic.ch/ embedded products New Support Request Support requests are only a
ページ6に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 1.8. Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your equipment.
ページ7に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 1.9. Applicable Documents and Standards The following publications are used in conjunction with this manual. When any of the referenced specifications are superseded by an approved revision, that revision shall apply. All documents may be obtained from their respective organizations. Advanced Configuration and Power Interface Specification Revision 2.0c, August 25, 2003 Copyright © 1996-2003 Compaq Computer Corporation, Intel Corporation,
ページ8に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A Smart Battery Data Specification Revision 1.1, December 11, 1998. www.sbs-forum.org System Management Bus (SMBus) Specification Version 2.0, August 3, 2000 Copyright © 1994, 1995, 1998, 2000 Duracell, Inc., Energizer Power Systems, Inc., Fujitsu, Ltd., Intel Corporation, Linear Technology Inc., Maxim Integrated Products, Mitsubishi Electric Semiconductor Company, Power- Smart, Inc., Toshiba Battery Co. Ltd., Unitrode Corporation, USAR Sy
ページ9に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A RoHS is often referred to as the "lead-free" directive but it restricts the use of the following substances: Lead Mercury Cadmium Chromium VI PBB and PBDE The maximum allowable concentration of any of the above mentioned substances is 0.1% (except for Cadmium, which is limited to 0.01%) by weight of homogeneous material. This means that the limits do not apply to the weight of the finished product, or even to a component but to
ページ10に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 2. OVERVIEW 2.1. Standard Features The smartModuleExpress945 is a miniaturized PC system on chip unit incorporating the major elements of a PC/AT compatible computer. It includes standard PC/AT compatible elements, such as: Powerful Core Duo, Core 2 Duo, Core Solo CPU DDR2 SODIMM socket for 256MByte to 2GByte RAM-Module st nd Dual 220pin connectors (1 Connector: Rows A-B and 2 Connector: Rows C-D, 440pins total) COMexpress Bus Typ
ページ11に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 2.3. Block Diagram * This function is disabled. A Macrovision license is required to enable it. 11
ページ12に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 2.4. Specifications CPU Specification CoreDuo / Celeron M Intel Core Duo L2400 LV 2x 1.66GHz with 2MB L2-cache Intel Core 2 Duo L7400 LV 2x 1.66GHz with 4MB L2-cache Intel Celeron M423 ULV 1x 1.06GHz with 1MB L2-cache Intel Celeron M440 1x 1.86GHz with 1MB L2-cache Clock 1GHz up to 1.86GHz st 1 Level Cache 2x 32kByte nd 2 Level Cache 1, 2, 4 MByte (on die) Technology 65nm VCCCore @ 1.6GHz 1.308V VCCCore @ 0.6GHz 0.844V VCCCore @ dee
ページ13に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A Intel 945GME Graphics PEG PEG Controller Specification Alternative to the internal graphic controller Multiplexed with the SDVO signals Support PEG Mode 16 lanes Voltage 1.5Volt Signals Differential 2.5Gbit/sec Intel 82801DBM (ICH7DH) Specification PCI-Bus Supports PCI 2.2 with 6 resources EIDE-Bus 1x Ultra P-ATA 100 SATA-Bus 2 channels 150MByte/sec USB V2.0 8 channels USB APIC INTEL I/O APIC SMB V2.0 SMBus controller FWH Fi
ページ14に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A Physical Characteristics Specification Dimensions Length: 117 mm +/- 0.1mm Depth: 70 mm +/- 0.1mm Height: 15 mm +/- 0.2mm (with 5mm bus connectors) 18 mm +/- 0.2mm (with 8mm bus connectors) The connector height is selected by the connector on the carrier board. Weight 120 gr / 12 ounces PCB Thickness 1.6 mm / 0.0625 inches nominal PCB Layer Multilayer Operating Environment Specification Relative Humidity 5-90% non-condensing
ページ15に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 2.5. Examples of Ordering Codes Product Name Part Number Description SMX945-C423 805360 smartModuleExpress945, Celeron M 423, 0MB RAM SMX945-C440 805354 smartModuleExpress945, Celeron M 440, 0MB RAM SMX945-L2400 805350 smartModuleExpress945, Core Duo L2400, 0MB RAM SMX945-L7400 805352 smartModuleExpress945, Core 2 Duo L7400, 0MB RAM These are only examples; for current ordering codes, please see the current price list. 2.6. Related Ap
ページ16に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 3. PREPARATION Warning, ESD Sensitive Device! Place the embedded computer board on an isolated, ESD-protected surface. Also ensure that all equipment, tools and people are fully protected against ESD. 3.1. Print Detailed Manuals from the CD Note… Place the Product-CD into the CD-Drive of a personal computer with a connected printer. Open the CD; open the directory SMX945. Printout the following detailed manuals: 1. The technical/h
ページ17に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 3.2. Connect Peripherals to the Board Prepare the following peripherals: VGA Monitor (LCD or CRT) with a resolution up to 1024x768pixel PS2 Keyboard USB Mouse LAN-Cable, if available Hard disk or CompactFlash USB CD-Drive or Floppy drive Power supply with 12Volt and min. 30Watts 1. Connect the VGA-Monitor to the 15pin high density DSub-connector. 2. Connect the Keyboard to the PS/2 connector. 3. Connect the USB-Mouse t
ページ18に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 4. START UP / POWER OFF THE BOARD With the PWRBTN# signal, the system can be started. Activating this signal a second time will shut the system down. How to Activate PWRBTN# The PWRBTN# signal must be connected to a ground to be activated. Minimum activation time is 3 seconds for the controller to start/stop the system. A few seconds after powering up the board, the screen should display the BIOS initial messages/pictures. 1
ページ19に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 19
ページ20に含まれる内容の要旨
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A 4.1. BIOS Setup Since the BIOS is auto-configuring during the start-up procedure, normally the user does not enter the BIOS setup. Manual setup is needed only to change the default settings. Please refer to the driver/software/BIOS manual “SMX945_BIOS” printed from the CD for the BIOS setup details. 4.2. Boot Up the Operating System and Install the Drivers Depending on which boot drive is available, boot up the operating system from the C
