ページ1に含まれる内容の要旨
USER GUIDE
2-PORT USB 3.0 SUPERSPEED PCI EXPRESS CARD
Model: 29055
1
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Introduction ........................................................................................................................................................................ 2 Features .............................................................................................................................................................................. 3 System Requirements .......................................................................................
ページ3に含まれる内容の要旨
INTRODUCTION Thank you for purchasing the 2-Port USB 3.0 SuperSpeed PCI Express Card. The 2-Port USB 3.0 SuperSpeed PCI Express Card adds SuperSpeed USB capabilities to your computer. Simply install this card into an available PCI slot on your computer to add two USB 3.0 SuperSpeed ports. SuperSpeed USB supports transfer rates of up to 5 Gbps- up to 10 times faster than USB 2.0. The 2-Port USB 3.0 SuperSpeed PCI Express Card is ideal for quickly transferring large amounts of data from
ページ4に含まれる内容の要旨
FEATURES Adds two USB 3.0 A-Male ports to a computer Connects internally via the PCI-e connector 5 Gbps signaling rate- 10X faster than USB 2.0 Backwards compatible with USB 2.0 Improved power efficiency over USB 2.0 Ideal for large data transfers from external hard drives, real-time video cameras, and other data intensive devices 3
ページ5に含まれる内容の要旨
SYSTEM REQUIREMENTS Operating System: Windows 7, XP, or Vista™ 4
ページ6に含まれる内容の要旨
PACKAGE CONTENTS 2-Port USB 3.0 SuperSpeed PCI Express Card Driver CD User Guide 5
ページ7に含まれる内容の要旨
DEVICE OVERVIEW USB 3.0 Ports 6
ページ8に含まれる内容の要旨
DRIVER INSTALLATION Before you install the device in your computer, you will need to install the necessary driver for proper operation. Please follow the procedure below. For Windows XP, Vista, Windows 7 Note: The following setup is an example shown using a Windows XP operating system. Some screenshots may vary slightly depending on your operating system. The setup wizard is designed to step you through each part of the driver installation process successfully. Step 1 Insert
ページ9に含まれる内容の要旨
DRIVER INSTALLATION Step 2 After reading the End-User License Agreement, please select “I accept the terms in the License Agreement” and click Next. Step 3 Please click Browse to choose the destination folder, and then click Next. 8
ページ10に含まれる内容の要旨
DRIVER INSTALLATION Step 4 Click Install to begin driver installation. The driver installation may take a few minutes. You may also get a software installation Windows security pop-up during this time. Click Continue Anyway when it appears to complete the installation. 9
ページ11に含まれる内容の要旨
DRIVER INSTALLATION Step 5 When the installation has completed, click Finish to exit the setup wizard. 10
ページ12に含まれる内容の要旨
DEVICE INSTALLATION Step 1 Turn off your computer and remove the cover/panel to expose the PCI slot. Step 2 Plug the 2-Port USB 3.0 Card into the PCI slot on the computer. Step 3 Replace the cover/panel and turn on your computer. When your computer starts up, a Found New Hardware Wizard will appear. Note: The following setup is an example shown using a Windows XP operating system. Some screenshots may vary slightly depending on your operating system. The setup wizard is des
ページ13に含まれる内容の要旨
DEVICE INSTALLATION Step 4 When the Found New Hardware Wizard appears, select Yes, this time only, and click Next. Step 5 Choose Install the software automatically and click Next. The Windows security pop-up may appear during this process. Click Continue Anyway to continue with the installation. 12
ページ14に含まれる内容の要旨
DEVICE INSTALLATION Step 6 Click Finish to complete the installation and exit the wizard. Step 7 The Found New Hardware Wizard will appear again. Repeat steps 4-6 for second USB 3.0 port installation. 13
ページ15に含まれる内容の要旨
VERIFY DEVICE INSTALLATION After you have completed the driver and device installation, you can go to the Device Manager to verify the product is installed and recognized properly. Windows XP Windows Vista/Windows 7 14
ページ16に含まれる内容の要旨
TECHNICAL SPECIFICATIONS Product No. 29055 Complies USB Rev. Ver. 3.0 Revision 2.0; PCI Bus Power PCI Express Base Management Interface Specification Specification: Revision 1.2 Connectors USB 3.0 Type A x2 (Downstream) Low-speed (1.5Mbps)/ Full-speed (12Mbps)/ Data Speed Support High-speed (480Mbps)/ Super- speed (5Gbps) Control/ Bulk/ Date Transfer Type Interrupt/ Support Isochoronous Power to Ports 500 mA (max.) Product Weig
ページ17に含まれる内容の要旨
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering B
ページ18に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product. ! In case of a storm, it
ページ19に含まれる内容の要旨
REGULATORY COMPLIANCE FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation. CE This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B 18
ページ20に含まれる内容の要旨
19
