ページ1に含まれる内容の要旨
May 2010
LPS500A-MM-SC LPS500A-MM-LC
LPS500A-SM-10K-SC LPS500A-SM-10K-LC
PoE PSE Media Converter, 10/100/1000BASE-T to 1000BASE-SX/LX
Connect two types of network segments together
®
BL A CK BOX
easily and inexpensively at Gigabit speeds while
also supplying power to PoE/PD devices such as
VoIP phones.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 •
Support
ページ2に含まれる内容の要旨
PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interf erence to radio communication. It hasbeen tested and found to comply with the limits for a Class A computing device in accordance with the speci
ページ3に含まれる内容の要旨
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. T odas las instrucciones de operación y uso deben ser seguidas. 5. El aparato
ページ4に含まれる内容の要旨
PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.” You’ll be live wit
ページ5に含まれる内容の要旨
Table of Contents Table of Contents Chapter Page 1. Specifications ...................................................................................................................................................................................... 6 2. Overview ............................................................................................................................................................................................ 7 2.1 Introduction ....................
ページ6に含まれる内容の要旨
PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX 1. Specifications Data Transfer Rate: 1000 Mbps: 1,488,000 pps; 100 Mbps: 148,800 pps; 10 Mbps: 14,880 pps Fiber Cable: 50/125, 62.5/125, or 100/140 µm multimode; 8.3/125, 8.7/125, 9/125, or 10/125 µm single-mode Flow Control: IEEE 802.3x compliant for full-duplex; backpressure flow control for half-duplex PSE Power Feeding Supports: “Endpoint” via twisted-pair Pins 1, 2, 3, 6 Standards: IEEE 802.3u 10BASE-T/100BASE-TX, 100BAS
ページ7に含まれる内容の要旨
Chapter 2: Overview 2. Overview 2.1 Introduction Use the PoE PSE Media Converter, 10/100/1000BASE-T to 1000BASE-SX/LX to connect two types of network segments easily and inexpensively. It complies with IEEE 802.3af power over Ethernet (PoE) standard. The AC-powered PoE media converter is power sourcing equipment (PSE) that combines data received over a twisted-pair link with -48 VDC, providing power to an IEEE 802.3af-powered device (PD) over the existing CAT5 UTP cable. The media converter
ページ8に含まれる内容の要旨
PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX 2.3 What’s Included Your package should include the following items. If anything is missing or damaged, please contact Black Box Technical Support at 724-746-5500. • (1) 10/100/1000BASE-T To 1000BASE-X PoE Media Converter • (1) AC power cord • (1) user manual on CD-ROM 2.4 Front and Back Panels The media converter has one Gigabit Ethernet twisted-pair port and one fiber port on its front panel. It also has a Power LED on the front p
ページ9に含まれる内容の要旨
Chapter 2: Overview Table 2-1. Front- and back-panel components. Number Component Description 1 RJ-45 port Links to twisted-pair Gigabit Ethernet 2 LED indicators Described in Table 2-2. 3 (2) SC or LC connectors Links to fiber. 4 3-prong power outlet Links to power cord. 2.5 LED Indicators Table 2-2. Indicators and their functions. LED Color Function FX LNK/ACT Green Lit when fiber connection is good. Blinks when fiber data is present. TP LNK/ACT Green Lit when TP connection is good
ページ10に含まれる内容の要旨
PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX Figure 2-3. DIP switches and Reset button on the converter’s side panel. Table 2-3. Side panel components and their functions. Component Setting Function Reset button Press once After you change the DIP switch settings, you must press the Reset button for changes to take effect. DIP Switch S1-1 Bridge mode Up Cut-through (default) mode supports jumbo frames size up to 9216 Bytes. Down Normal mode supports frame size up to
ページ11に含まれる内容の要旨
Chapter 3: Installation 3. Installation 3.1 Connecting Hardware The 10/100/1000BASE-T PoE PSE to 1000BASE-X Media Converter requires no software configuration. To install the media converter, follow the steps below: 1. Connect the PSE media converter to an AC power source. 2. C onnect a PoE/PD device to the PSE/TP port on the media converter using the appropriate twisted-pair cable. The media converter can also work as a standard media converter when PoE is disabled. 3. Connect the FX port t
ページ12に含まれる内容の要旨
PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX 3.2 PoE Endpoint RJ-45 Pin Assignment IEEE 802.3af assigns pairs on the RJ-45 connector of the CAT5 cable as shown in Figure 3-2. Endpoint: -48V via twisted-pair Pins 1, 2, 3, 6. Figure 3-2. Endpoint PSE RJ-45 male connector. Page 12 724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
ページ13に含まれる内容の要旨
Chapter 4: Link Fault Passthrough 4. Link Fault Passthrough This converter supports link fault passthrough (LFP). Link status on one port is sent to the other port to identify the remote nodes. If the twisted-pair port is unplugged, the converter stops transmission on the fiber port. This causes the remote fiber node link to fail. LEDs indicate the link failure on both twisted-pair and fiber ports. If the fiber link fails, the converter restarts autonegotiation on the twisted-pair port but st
ページ14に含まれる内容の要旨
PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX Gigabit Remote Gigabit Ethernet Ethernet station Fiber switch LFP switch A B TP C Fiber cable Figure 4-4. Normal status via one LFP. Gigabit Remote Gigabit Ethernet Ethernet station Fiber switch LFP switch A B TP C Fiber cable Figure 4-5. The status when twisted-pair Cable A is broken. Gigabit Remote Gigabit Ethernet Ethernet station Fiber switch LFP switch A B TP C Fiber cable Figure 4-6. The status when fiber Cable B
ページ15に含まれる内容の要旨
Chapter 5: Cable Connection Parameters 5. Cable Connection Parameters 1000BASE-SX/LX networks only support full-duplex mode. The switch-based media converter breaks the twisted-pair and fiber segments’ collision domain to extend the cabling distance. TP cable limitations: CAT5 and up to 328 feet (100 m) Table 5-1. Mulltimode fiber cable limitations. Mode Multimode Fiber Multimode Fiber 62.5/125 µm 50/125 µm Bandwidth (MHz-km) Distance Bandwidth (MHz-km) Distance 1000SX (SC/LC) 160 m
ページ16に含まれる内容の要旨
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 20 seconds or less. © Copyright 2
