ページ1に含まれる内容の要旨
® ®
ACU5050A-R2
NETWORKSERVICES
™
ServSwitch Wizard VGA/USB
The quickest way to extend VGA video plus four
USB devices and speakers up to nearly 1000 feet
from your computer.
Making full use of a single length of category 5, 5e, 6, 7 or 7a twisted pair
cabling.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing address: Black Box Corporat
ページ2に含まれる内容の要旨
ServSwitch Wizard VGA/USB Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and ServSwitch is a trademark, of BB Technologies, Inc. Mac is a registered trademark of Apple Computer, Inc. Linux is registered trademark of Linus Torvalds. Windows is a registered trademark of Microsoft Corporation. NetWare is a registered trademark of Novell, Inc. Sun is a trademark of Sun Microsystems, Inc. Unix is a registered trademark of UNIX System Laboratories, Inc.
ページ3に含まれる内容の要旨
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15
ページ4に含まれる内容の要旨
ServSwitch Wizard VGA/USB Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. L as instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. T odas las instrucciones de operación y uso deben ser seguidas. 5.
ページ5に含まれる内容の要旨
Table of Contents Contents 1. Specifications ............................................................................................................................... ............................................... 6 2. Overview .................................................................................................................................................................................... 7 3. Installation ..................................................................
ページ6に含まれる内容の要旨
ServSwitch Wizard VGA/USB 1. Specifications Approvals: CE, FCC Hardware Compatibility: All computers with VGA analog video and USB interfaces Software Compatibility: Operates with all known software and operating systems including Windows®, Linux®, Unix®, BSD, all Sun® OS, all Mac® OS, NetWare®, etc. Connectors: Video: VGA female (local transmitter) USB: USB Type B female Other: RJ-45 CATx link socket Power jack Connectors: Video: VGA female (remote receiver) USB: (4) USB Type A f
ページ7に含まれる内容の要旨
Chapter 2: Overview 2. Overview Thank you for choosing the ServSwitch Wizard VGA-USB extenders which provide a very effective way to put distance between your computer and its peripherals. The compact casings and ease of use of the modules belie the ingenuity of their operation. Using our proprietary transmission techniques we are able to reliably transfer more signals than ever before along a single length of Category 5, 5e, 6, 7 or 7a twist- ed pair cabling. What this means for you is that
ページ8に含まれる内容の要旨
ServSwitch Wizard VGA/USB 3. Installation 3.1 Mounting the modules – desk or rack The modules can be situated on a desk or alternatively, for larger installations, mounted within an optional rack mount chassis. 3.1.1 Desk mount Apply the supplied self-adhesive rubber feet to the underside of the module as shown in Figure 3-1: Figure 3-1. Applying the supplied self-adhesive rubber feet to the underside of the module Page 8 724-746-5500 | blackbox.com
ページ9に含まれる内容の要旨
4 1 2 3 I I POWER N LOCAL OUT LNK IN TOREMOTE ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R ON Chapter 3: Installation 3.1.2 Rack mount Note: The module switches are not accessible once it is inserted into the rack, therefore, check all settings before insertion. 1 Place the rack securing plate (available as a separate kit) onto the front of the module and secure it with the two countersunk screws. 2 Orient the module on its side so that its labeled face is the correct w
ページ10に含まれる内容の要旨
ServSwitch Wizard VGA/USB 3.2 Connections Installation of the modules is straightforward and requires minimal configuration in most cases. • C on nec t ion s a t t he loca l mod u le • C on nec t ion s a t t he r e mo t e mod u le IMPORTANT: The ServSwitch Wizard VGA-USB can be used with other hubs in the system, but please note that the local unit should not be connected to the downstream port of a bus-powered hub due to power constraints. 3.2.1 Connections at the local module 1 W
ページ11に含まれる内容の要旨
POWER OUT LINK TOREMOTE ON ™ h Wizard VGA/USB K V M E X T E N D E R POWER OUT LINK TOREMOTE ON ™ h Wizard VGA/USB K V M E X T E N D E R POWER OUT LINK TOREMOTE ON ™ h Wizard VGA/USB K V M E X T E N D E R Chapter 3: Installation 4 Optionally connect a local video monitor to the video out feed- through connector on the local module as shown in Figure 3-5: To local monitor Figure 3-5. Optionally attaching a local video monitor 5 Attach the connector of the category 5, 5e, 6, 7 or 7a link cable (up
ページ12に含まれる内容の要旨
ServSwitch Wizard VGA/USB 3.2.2 Connections at the remote module 1 Place the remote module adjacent to the user location. 2 Attach the lead from the video monitor to the video out socket on the remote module as shown in Figure 3-7: To video monitor Figure 3-7. Attaching the VGA video monitor cable 3 Attach the leads of up to four USB devices (two of which are usually a keyboard and mouse) to the sockets located adjacent to the video output connector as shown in Figure 3-8: To USB devices, e
ページ13に含まれる内容の要旨
POWER OUT LINK TOLOCAL ON Wizard VGA/USB V M E X T E N D E R POWER OUT LINK TOLOCAL ON Wizard VGA/USB V M E X T E N D E R Chapter 3: Installation 4 Optionally attach the lead from your stereo speakers to the audio output socket on the remote module as shown in Figure 3-9: To speakers Figure 3-9. Optionally attaching stereo speakers 5 Attach the connector of the category 5, 5e, 6, 7 or 7a link cable (up to 1000 feet in length) to the ‘TO LOCAL’ socket on the remote module as shown in Figure 3-1
ページ14に含まれる内容の要旨
POWER OUT LINK TOLOCAL ON Wizard VGA/USB V M E X T E N D E R ServSwitch Wizard VGA/USB 6 Attach the output connector of the power adapter to the ‘POWER’ socket of the remote module as shown in Figure 3-11: To power supply Figure 3-11. Attaching the power adapter 7 Attach the IEC power cord to the power adapter body and insert the mains plug of the cord to a nearby power outlet as shown in Figure 3-12: To mains outlet Figure 3-12. Attaching the power cord to the adapter Page 14 724-746-5500
ページ15に含まれる内容の要旨
Chapter 3: Installation 724-746-5500 | blackbox.com Page 15
ページ16に含まれる内容の要旨
ServSwitch Wizard VGA/USB 3.2.3 Dual user configuration You can combine two ServSwitch Wizard VGA-USB extender sets to create a dual user configuration. Such an installation would allow a single computer to be controlled from two different positions, with each position receiving the same audio visual output and having equal and concurrent control over the computer. Arbitration between the two positions is handled by the computer’s USB system and so this arrangement is better suited to situati
ページ17に含まれる内容の要旨
Chapter 3: Installation First local module Video crosslink Audio, USB and video from the PC from first to second local module Audio crosslink from first to second local module Second USB from the PC Figure 3-14. Interconnections required for a dual user configuration Most of the connections are similar to the standard configuration. The main difference is in the links to the second local module. Use an audio link lead to connect the audio out socket of the first local module to the aud
ページ18に含まれる内容の要旨
ServSwitch Wizard VGA/USB 3.3 Video display (DDC) information The Display Data Channel (or DDC) is an industry standard scheme which allows video monitors to declare their capabilities to the computer’s video adapter circuitry, allowing the latter to optimise their outputs accordingly. Since the widespread adoption of the scheme, video adapters have become increasingly dependent on receiving relevant DDC information during startup, before they will output anything more than a rudimentary vide
ページ19に含まれる内容の要旨
LINK OREMOTE ON Chapter 3: Installation 3.3.1 DDC indications When power is first applied to the local module (either from the computer’s USB port or an optional power adapter) it will search for valid DDC data on its video out connector. During this process, the green indicator (built into the link connector) will flash to indicate its progress: • If no v a l i d DDC i n f orm a t ion i s loca t ed , t he g r ee n i n d i ca t or wi l l g iv e one v e r y s hor t fl a s h ,
ページ20に含まれる内容の要旨
ServSwitch Wizard VGA/USB 3.4 Video compensation The ServSwitch Wizard VGA-USB modules include a video compensation system that allows you to get the best results from your remote video display(s). Using this special mode you can configure: • Cable type - Select the type of link cable used. • Cable length - Enter the length of the link cable. • Video gain - Alter the signal gain for the image. • Color skew - Adjust the timing of each color to fine tune the image. • Expert mode - Please con
