ページ1に含まれる内容の要旨
H87M-E
Motherboard
ページ2に含まれる内容の要旨
E8197 First Edition V1 April 2013 Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if:
ページ3に含まれる内容の要旨
Contents Safety information ...................................................................................... iv About this guide ......................................................................................... iv Package contents ....................................................................................... vi H87M-E specifications summary ............................................................... vi Chapter 1: Product introduction 1.1 Before you proceed ............
ページ4に含まれる内容の要旨
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power
ページ5に含まれる内容の要旨
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. 2. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package. Conventions used in this
ページ6に含まれる内容の要旨
Package contents Check your motherboard package for the following items. Motherboard ASUS H87M-E motherboard Cables 2 x Serial ATA 6.0 Gb/s cables Accessories 1 x I/O Shield Application DVD Support DVD Documentation User Guide If any of the above items is damaged or missing, contact your retailer. H87M-E specifications summary ® TM ® CPU LGA1150 socket for 4th Generation Intel Core i7/i5/i3, Pentium , ® Celeron Processors ® Supports Intel 22nm CPU ® Supports Intel Turbo Boost Technology 2.0* ®
ページ7に含まれる内容の要旨
H87M-E specifications summary LAN Realtek 8111G Gigabit LAN controller ® USB Intel H87 Express Chipset - supports ASUS USB 3.0 Boost - 2 x USB 3.0/2.0 ports at mid-board for front panel support - 4 x USB 3.0/2.0 ports at back panel (blue) - 8 x USB2.0/1.1 ports (6 ports at midboard, 2 ports at back panel) ASUS unique ASUS 5X Protection features - ASUS motherboards safeguard your PC with 5X Protection: DIGI+VRM, DRAM Fuse, ESD Guards, All 5K-Hour Solid Capacitors, and Stainless Steel Back I/
ページ8に含まれる内容の要旨
H87M-E specifications summary Rear panel I/O 1 x PS/2 keyboard port (purple) ports 1 x PS/2 mouse port (green) 1 x DVI port 1 x RGB port 1 x HDMI port 1 x LAN (RJ-45) port 4 x USB 3.0/2.0 ports 2 x USB 2.0/1.1 ports 3 x Audio jacks support 8-channel audio output Internal 1 x USB 3.0/2.0 connector supports additional 2 USB 3.0/2.0 ports (19-pin) connectors/ 3 x USB 2.0/1.1 connectors support additional 6 USB 2.0 ports switches/ 6 x SATA 6.0 Gb/s connectors buttons 1 x CLRTC jumper 1 x 4-pin CPU
ページ9に含まれる内容の要旨
Product introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them. •
ページ10に含まれる内容の要旨
LGA1150 Place this side towards the rear of the chassis H87M-E 1.2.3 Motherboard layout 1 2 3 4 3 5 19.3cm (7.6in) CPU_FAN CHA_FAN2 KBMS DIGI +VRM EATX12V USB3_34 2 USB3_56 HDMI ASM 1442 LAN_USB78 COM BATTERY 6 AUDIO CHA_FAN1 PCIEX16 16 H87M-E RTL 8111G PCIEX1_1 15 64Mb Super BIOS ® I/O Intel PCIEX1_2 H87 14 SATA6G_3 SATA6G_4 USBPWF SB_PWR 7 ALC 887-VD2 PCIEX1_3 CLRTC SPDIF_OUT USB910 USB1112 USB1314 SATA6G_1 SATA6G_2 SPEAKER AAFP F_PANEL 13 12 11 10 9 8 1-2 Chapter 1: Product introduction DVI
ページ11に含まれる内容の要旨
1.2.4 Layout contents Connectors/Jumpers/Slots/LED Page 1. Keyboard and USB device wakeup (KB_USBPWB) 1-11 2. ATX power connectors (24-pin EATXPWR, 8-pin ATX12V) 1-14 3. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2) 1-16 ® 4. Intel LGA1150 CPU socket 1-3 5. DDR3 DIMM slots 1-7 6. USB 3.0 connector (20-1 pin USB3_12) 1-17 ® 7. Intel H87 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~6 [yellow]) 1-16 8. Speaker connector (4-pin SPEAKER) 1-18 9. System panel connector (10-1 pin F_P
ページ12に含まれる内容の要旨
Unplug all power cables before installing the CPU. • Ensure that you install the correct CPU designed for the LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the
ページ13に含まれる内容の要旨
4 C 5 A B 1.3.2 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. ASUS H87M-E 1-5
ページ14に含まれる内容の要旨
To install the CPU heatsink and fan assembly A 1 2 B B A 3 4 To uninstall the CPU heatsink and fan assembly 2 1 A B B A 1-6 Chapter 1: Product introduction
ページ15に含まれる内容の要旨
1.4 System memory 1.4.1 Overview This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Module (DIMM) sockets. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. ® According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. Channel Sockets Channel A DIMM_A1 & DIMM_A2 Channel B DIMM_B1 & DIMM_B2 H87M-E H87M-E 240-pin DDR3 DIMM sockets 1.4.2 Memory configurations You may
ページ16に含まれる内容の要旨
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to s
ページ17に含まれる内容の要旨
Support the DIMM lightly with 2 your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out 1 with extra force. 2. Remove the DIMM from the socket. DIMM notch 1.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard com
ページ18に含まれる内容の要旨
1.5.3 PCI Express 2.0 x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. 1.5.4 PCI Express 3.0/2.0 x16 slot This motherboard supports PCI Express x16 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. IRQ assignments for this motherboard A B C D E F G H LAN – – shared – – – – – PCIE x16_1 shared – – – – – – – PCIE x1_1 – – shared – – – – – PCIE x1_2 – – – shared –
ページ19に含まれる内容の要旨
4. Hold down the key during the boot process and enter BIOS setup to re- enter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure! • If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery. • You do not need to clear the RTC when the system hangs due to overclocking. For system failure due
ページ20に含まれる内容の要旨
3. USB device wake-up (USBPWF) This jumper allows you to enable or disable the USB device wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the USB keyboard or by clicking on the USB mouse. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. USBPWF 1 2 2 3 H87M-E +5V +5VSB (Default) H87M-E USB device wake up 1.7 Connectors 1.7.1 Rear panel connectors 2
