ページ1に含まれる内容の要旨
®
CUBX-L/CUBX-E
Socket 370 ATX Motherboard
USER’S MANUAL
Special Features
CUBX-L
• UltraDMA/33 Support
• 2 USB Ports
CUBX-E
• UltraDMA/100 Support
• 5 USB Ports (2 standard, 3 upgradeable)
ページ2に含まれる内容の要旨
USER'S NOTICE No part of this manual, including the products and software described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED W
ページ3に含まれる内容の要旨
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2895-9254 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Addre
ページ4に含まれる内容の要旨
CONTENTS 1. INTRODUCTION .............................................................................. 7 1.1 How This Manual Is Organized .................................................. 7 1.2 Item Checklist ............................................................................. 7 2. FEATURES ......................................................................................... 8 2.1 The ASUS CUBX-L/CUBX-E Motherboard ............................. 8 2.1.1 Specifications .............
ページ5に含まれる内容の要旨
CONTENTS 4.4 Advanced Menu ........................................................................ 54 4.4.1 Chip Configuration ........................................................ 58 4.4.2 I/O Device Configuration .............................................. 60 4.4.3 PCI Configuration ......................................................... 62 4.4.4 Shadow Configuration ................................................... 65 4.5 Power Menu .................................................
ページ6に含まれる内容の要旨
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
ページ7に含まれる内容の要旨
1. INTRODUCTION 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEATURES Production information and specifications 3. HARDWARE SETUP Intructions on setting up the motherboard. 4. BIOS SETUP Intructions on setting up the BIOS 5. SOFTWARE SETUP Intructions on setting up the included software 6. SOFTWARE REFERENCE Reference material for the included software 7. APPENDIX Optional items and general reference 1.2
ページ8に含まれる内容の要旨
2. FEATURES Specifications 2. FEATURES 2.1 The ASUS CUBX-L/CUBX-E Motherboard The ASUS CUBX-L/CUBX-E is carefully designed for the demanding PC user who wants advanced features processed by the fastest CPU. 2.1.1 Specifications • Latest Intel Processor Support ® Intel Pentium III 100MHz FSB Coppermine core FC-PGA Intel Celeron™ 66MHz FSB Coppermine core FC-PGA Intel Celeron™ 66MHz FSB Mendocino PPGA • Intel AGPset: Features Intel’s 440BX AGPset with I/O subsystems and front-side bus (FSB) platfo
ページ9に含まれる内容の要旨
2. FEATURES • Multi-I/O: Provides two high-speed UART compatible serial ports and one paral- lel port with EPP and ECP capabilities. • UltraDMA/33 Bus Master IDE: Comes with an onboard PCI Bus Master IDE controller with two connectors that support four UltraDMA/33 IDE devices on two channels. Supports UltraDMA/33, PIO Modes 3 and 4, and Bus Master IDE DMA Mode 2, as well as Enhanced IDE devices, such as Tape Backup, CD- ROM, CD-R/RW, and LS-120 drives. • Wake-On-LAN Connector: Supports Wake-On-L
ページ10に含まれる内容の要旨
2. FEATURES Specifications 2. FEATURES 2.1.2 Special Features • ACPI Ready: Advanced Configuration Power Interface (ACPI) provides more Energy Saving Features for operating systems that support OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards. To fully utilize the benefits of ACPI, an ACPI-supported OS such as Windows 98 must be used. • Easy Installation: Incorporates BIOS th
ページ11に含まれる内容の要旨
2. FEATURES 2.1.4 Intelligence • Dual Function Power Button: Pushing the power button for less than 4 sec- onds when the system is in the working state places the system into one of two states: sleep mode or soft-off mode, depending on the BIOS or OS setting (see PWR Button < 4 Secs in 4.5 Power Menu). When the power button is pressed for more than 4 seconds, the system enters the soft-off mode regardless of the BIOS setting. • Fan Status Monitoring and Alarm: To prevent system overheat and syst
ページ12に含まれる内容の要旨
2. FEATURES MB Components 2. FEATURES 2.2 Motherboard Components See opposite page for locations. Location Processor Support Socket 370 for Pentium III/Celeron Processors ....................... 1 Feature Setting DIP Switches ................................................... 8 100/66MHz system bus (Frequency Multiples 2.0-8.0) Chipsets Intel 440BX AGPset ................................................................. 3 Multi-I/O Chipset .......................................................
ページ13に含まれる内容の要旨
2. FEATURES 2.2.1 Component Locations 1 23 4 5 4 3 2 1 0 9 8 7 6 5 4 3 12 11 10 9 8 7 6 ASUS CUBX-L/CUBX-E User’s Manual 13 2. FEATURES Component Locations
ページ14に含まれる内容の要旨
3. H/W SETUP Motherboard Layout 3. HARDWARE SETUP 3.1 CUBX-L/CUBX-E Motherboard Layout 21.8 cm (8.6 in) PS/2KBMS T: Mouse ATXPWR CPU_FAN PWR_FAN B: Keyboard USB T: Port1 B: Port2 COM1 JTPWR Socket 370 Intel COM2 440BX AGPset Promise ATA100 0 1 2 3 4 5 6 7 Row CR2032 3V Accelerated Graphics Port Lithium Cell DSW CMOS Power LED1 DIP Switches PCI1 FLOPPY Multi-I/O PCI2 SMB WOL_CON CHASIS CHA_FAN PCI3 Intel CLRTC PIIX4E ASUS PCI4 PCIset ASIC with Hardware WOR Monitor PCI5 JEN USB3A PANEL USB2 ISA1 I
ページ15に含まれる内容の要旨
3. HARDWARE SETUP 3.2 Layout Contents Motherboard Settings 1) JEN p. 18 JumperFree Mode Setting (Disable/Enable) 2) DSW 6 p. 20 AGP Bus Frequency Setting 3) DSW 5–10 p. 20 CPU External Frequency Selection 4) DSW 1-4 p. 21 CPU Core:BUS Frequency Multiple Selection Expansion Slots/Sockets 1) System Memory p.22 System Memory Support 2) DIMM1/2/3/4 p.22 DIMM Memory Module Support 3) Socket 370 p.25 CPU Support 4) PCI1/2/3/4/5 p.27 32-bit PCI Bus Expansion Slots 5) ISA1/ISA2 p.27 16-bit ISA Bus Expan
ページ16に含まれる内容の要旨
3. H/W SETUP Layout Contents 3. HARDWARE SETUP 19) MSG.LED (PANEL) p. 38 System Message LED (2 pins) 20) SMI (PANEL) p. 38 System Management Interrupt Lead (2 pins) 21) PWR.SW (PANEL) p. 38 ATX / Soft-Off Switch Lead (2 pins) 22) RESET (PANEL) p. 38 Reset Switch Lead (2 pins) 23) ATXPWR p. 39 ATX Power Supply Connector (20 pins) 24) JTPWR p. 39 Power Supply Thermal Sensor Connector (2 pins) ASUS CUBX-L/CUBX-E User’s Manual 16
ページ17に含まれる内容の要旨
3. HARDWARE SETUP 3.3 Hardware Setup Procedure Before using your computer, you must complete the following steps: 1. Check Motherboard Settings 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Panel Wires, and Power Supply 6. Setup the BIOS Software 3.4 Motherboard Settings This section explains in detail how to change your motherboard’s function settings through the use of switches and/or jumpers. WARNING! Computer mothe
ページ18に含まれる内容の要旨
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP Motherboard Features Settings (DIP Switches - DSW) The motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the switches in the OFF position. 1. Frequency Multiple 2. Frequency Multiple 3. Frequency Multiple 4. Frequency Multiple 5. (Reserved) 6. AGP Frequency Selection 7. Frequency Selection 8. Frequency Selection 9. Frequency Selection 10. Frequen
ページ19に含まれる内容の要旨
3. HARDWARE SETUP 2) AGP Bus Frequency Setting (DSW Switch 6) This option sets the frequency ratio between the AGP bus frequency and the DRAM (CPU bus) frequency. The default sets the AGP bus frequency to be 2/3 of the DRAM frequency. When the CPU/DRAM frequency is set to 66MHz, set this switch to [ON]. See the processor table on the next page. Setting DSW Switch 6 DRAM Freq. x 2/3 [OFF] (default) DRAM Freq. x 1 [ON] ON ON 12345 6 78910 12345 6 78910 DRAM Freq. x1 DRAM Freq. x2/3 CUBX-L/CUBX-E A
ページ20に含まれる内容の要旨
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 3) CPU External Frequency Selection (DSW Switches 7-10) This option tells the clock generator what frequency to send to the CPU, DRAM, and the PCI bus. This allows the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock multiplied by the Frequency Multiple equals the CPU’s Internal fre- quency (the advertised CPU speed). ON ON ON 12345 678910 12345 678910 12345 678910 CPU/DRAM → 66.0MHz 83.0MHz 75.0MHz PCI BUS → 41.6MHz 33.4
