ページ1に含まれる内容の要旨
4Core1600-D800
User Manual
Version 1.0
Published April 2008
Copyright©2008 ASRock INC. All rights reserved.
1 1 1 1 1
ページ2に含まれる内容の要旨
Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be regis- tered trademarks or copyrights of their respective companies, and are used only for identif
ページ3に含まれる内容の要旨
Contents Contents Contents Contents Contents 1 Introduction 1 Introduction 1 Introduction 1 Introduction 1 Introduction ................................................... ................................................... ................................................... ................................................... ................................................... 5 5 5 5 5 1.1 Package Contents .......................................................... 5 1.2 Specifications .....
ページ4に含まれる内容の要旨
3.6 Security Screen .............................................................. 41 3.7 Exit Screen .................................................................... 42 4 Software Support 4 Software Support .......................................... .......................................... 43 43 4 Software Support 4 Software Support 4 Software Support .......................................... .......................................... .......................................... 43 43
ページ5に含まれる内容の要旨
Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Thank you for purchasing ASRock 4Core1600-D800 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to qual- ity and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by- step guide to the hardware instal
ページ6に含まれる内容の要旨
1.2 1.2 Specifications Specifications 1.2 1.2 1.2 Specifications Specifications Specifications Platform - Micro ATX Form Factor: 9.6-in x 8.4-in, 24.4 cm x 21.3 cm ® TM TM TM CPU - LGA 775 for Intel Core 2 Extreme / Core 2 Quad / Core ® ® 2 Duo / Pentium Dual Core / Celeron , supporting Penryn Quad Core Yorkfield and Dual Core Wolfdale processors - Compatible with all FSB1600/1333/1066/800MHz CPUs (see CAUTION 1) - Supports Hyper-Threading Technology (see CAUTION 2) - Supports Untied Ove
ページ7に含まれる内容の要旨
Connector - 4 x Serial ATAII 3.0Gb/s connectors (No support for RAID and “Hot Plug” functions) (see CAUTION 10) - 1 x ATA100 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - 1 x DeskExpress Hot Plug Detection header - CPU/Chassis FAN connector - 24 pin ATX power connector - 4 pin 12V power connector - CD in header - Front panel audio connector - 2 x USB 2.0 headers (support 3 USB 2.0 ports) (see CAUTION 11) - 1 x WiFi/E header (see CAUTION 12) BIOS Feature - 4Mb AMI BIOS -
ページ8に含まれる内容の要旨
CAUTION! 1. FSB1600-CPU will operate in overclocking mode. Under this situation, PCIE frequency will also be overclocked to 120MHz. If you use a FSB1600- CPU on this motherboard, you need to adjust the jumpers. If you want to overclock the CPU you adopt from FSB800 to FSB1066, you need to adjust the jumpers as well. Please refer to page 18 for proper jumper settings. 2. About the setting of “Hyper Threading Technology”, please check page 28. 3. This motherboard supports Untied Overclocking Tec
ページ9に含まれる内容の要旨
12. WiFi/E header supports WiFi+AP function with ASRock WiFi-802.11g or WiFi-802.11n module, an easy-to-use wireless local area network (WLAN) adapter. It allows you to create a wireless environment and enjoy the convenience of wireless network connectivity. Please visit our website for the availability of ASRock WiFi-802.11g or WiFi-802.11n module. ASRock website http://www.asrock.com 1.3 1.3 1.3 Minimum Hardware R Minimum Hardware R Minimum Hardware Requirement T equirement T equirement Tab
ページ10に含まれる内容の要旨
ATXPWR1 Top: Line In PS2 PARALLEL PORT Mouse Center: Line Out PS2 VGA1 Bottom: Keyboard COM1 Mic In Super I/O 1 1 1.4 Motherboard Layout 1.4 Motherboard Layout 1.4 Motherboard Layout 1.4 Motherboard Layout 1.4 Motherboard Layout 1 2 3 4 5 21.3cm (8.4 in) PS2_USB_PWR1 CPU_FAN1 6 IDE1 USB 2.0 7 T: USB2 B: USB3 USB 2.0 Top: T: USB0 RJ-45 B: USB1 Intel 29 G31 28 CD1 AUDIO CODEC Chipset PCI EXPRESS 27 PCIE1 LAN PHY FD 26 1 PCIE2/DE 25 8 Intel 9 ICH7 PCI1 CMOS Battery 24 4Mb CLRCMOS1 BIOS 1 PCI2 USB6
ページ11に含まれる内容の要旨
1.5 ASRock 6CH I/O 1.5 ASRock 6CH I/O 1.5 ASRock 6CH I/O 1.5 ASRock 6CH I/O 1.5 ASRock 6CH I/O 1 3 2 4 5 6 7 11 10 9 8 1 PS/2 Mouse Port (Green) 7 Microphone (Pink) 2 Parallel Port 8 USB 2.0 Ports (USB01) 3 USB 2.0 Ports (USB23) 9 VGA Port 4 RJ-45 Port 10 COM Port 5 Line In (Light Blue) 11 PS/2 Keyboard Port (Purple) 6 Line Out (Lime) * To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below step
ページ12に含まれる内容の要旨
Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation 4Core1600-D800 is a Micro ATX form factor (9.6" x 8.4", 24.4 x 21.3 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components. 2.1 S
ページ13に含まれる内容の要旨
black line black line 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation For the installation of Intel 775-LAND CPU, please follow the steps below. 775-Pin Socket Overview Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Step 1.
ページ14に含まれる内容の要旨
For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion. Step 2-4. Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Remove PnP Cap (Pick and Place Cap): Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while
ページ15に含まれる内容の要旨
2.4 2.4 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink 2.4 2.4 2.4 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink This motherboard is equipped with 775-Pin socket that supports Intel 775-LAND CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 775-LAND CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heats
ページ16に含まれる内容の要旨
2.5 Installation of Memor 2.5 Installation of Memory Modules (DIMM) y Modules (DIMM) 2.5 Installation of Memor 2.5 Installation of Memor 2.5 Installation of Memory Modules (DIMM) y Modules (DIMM) y Modules (DIMM) 4Core1600-D800 motherboard provides two 240-pin DDR2 (Double Data Rate 2) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install two identical (the same brand, speed, size and chip-type) memory modules in the DDR2 DIMM slots t
ページ17に含まれる内容の要旨
2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane width graphics cards.
ページ18に含まれる内容の要旨
2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The il- lustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins. Jumper Setting Description PS2_USB_PWR1 Short pin2, pin3 to enable 1_2 2_3 (see p.10 No. 2) +5VSB (standby) for PS/2 +5V +5VSB o
ページ19に含まれる内容の要旨
2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! FDD connector (33-pin FLOPPY1) (see p.10 No. 20) FLOPPY1 Pin1 the red-striped side to Pin1 Note: Make sure the red-s
ページ20に含まれる内容の要旨
CD-L GND GND CD-R 1 USB_PWR USB 2.0 Headers Besides four default USB 2.0 P-4 P+4 (9-pin USB4_5) ports on the I/O panel, there are GND DUMMY (see p.10 No. 16) two USB 2.0 headers on this motherboard. USB4_5 header can GND P+5 support two USB 2.0 ports, and P-5 USB_PWR USB6 header can support one USB 2.0 port. (4-pin USB6) 1 (see p.10 No. 19) GND P+6 P-6 USB_PWR WiFi/E Header This header supports WiFi+AP USB+5V_2 TXN (15-pin WIFI/E) function with ASRock TXP GND2 PCIE_RST# (see p.10 No. 22) WiFi
