ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
FCC INFORMATION COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Corporation of America Address: 6600 Orangethorpe Ave. Buena Park, CA 90620 Telephone: 714-522-9011 Fax: 714-228-3913 Type of Equipment: CD Recordable/Rewritable Drive Model Name: CRW2100SX This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interfere
ページ3に含まれる内容の要旨
LASER INFORMATION Laser Product Class: Class 1 CAUTION Laser Diode Properties Use of controls or adjustments or performance of Wavelength: 780-787 nm procedures other than those specified herein may result Pulse Durations and Max. Output in hazardous radiation exposure. at the lens of the Laser Pickup Unit Read Mode: 0.7mW (Continuous) ACHTUNG Write Mode: Max. 38mW Halten Sie sich beim Bedienen und Einstellen der (for 166ns, Min. Cycle 86.6ns) Bedienungselemente sowie bei der Bedienungs
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
OWNER’S MANUAL i English
ページ6に含まれる内容の要旨
SAFETY PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING These precautions explain how to use the device correctly and safely, thereby preventing injury to yourself or to others. This section has been sub-divided into a WARNING section and a CAUTION section, according to the likelihood and nature of any potential injuries or damage inflicted. They relate to your personal safety, and also help you minimize the risk of damaging the device. Please read these sections carefully before proceedin
ページ7に含まれる内容の要旨
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to yourself or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: l Always unplug the computer from the electrical outlet if it will not be used for a prolonged period of time or if there is a risk of lightning. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire. l Do not expose the device to e
ページ8に含まれる内容の要旨
n About CD-R/RW discs Please read the following regarding the handling of CD-R/RW discs. 1. Do not expose discs to excessive heat such as in direct sunlight or near a heater. Also avoid keeping them in a humid place. 2. Do not touch disc surfaces. When handling a disc, hold it by its edges. 3. Remove dust and dirt from disc surfaces. Use air-based dust removers. The surfaces may be scratched if wiped with a dry cloth. 4. Do not stick labels on disc surfaces. 5. Do not write on disc surfaces exc
ページ9に含まれる内容の要旨
Table of Contents Introduction ....................................................................... 1 Features of the CRW2100SX Drive ................................................. 1 Before Use ......................................................................... 3 System Requirements ...................................................................... 3 Supported Discs .............................................................................. 5 Tools ............................
ページ10に含まれる内容の要旨
Introduction Features of the CRW2100SX Drive High speed The CRW2100SX drive supports up to 16X speed writing of a CD-R disc, and up to 10X speed writing of a CD-RW disc. For example, an audio CD (79 minutes/ 700MB) can be created in approximately 5 minutes. With newly adopted Partial CAV writing method (See the following column), you can write a disc by directly transferring content data from a 32X-speed or faster CD-ROM drive. Data reading at up to 40X speed is supported. CD TEXT support The
ページ11に含まれる内容の要旨
Introduction *1 Pure-Phase Laser System (patent applied for) Technology that reduces phase interference of the laser beam, so that it shines accurately on the disc. *2 Jitter value An important measure of recording quality. This has been improved 25% compared with Yamaha models not using this technology. *3 Running OPC (Optimum Power Control) CD-R/RW discs vary by manufacturer in their recording characteristics, and the laser output required to write data differs by disc. Running OPC is technolo
ページ12に含まれる内容の要旨
Before Use System Requirements In order to use the CRW2100SX drive, your computer system will need to meet the following set of requirements. n The CRW2100SX drive may not write at a maximum speed depending on your computer’s system configuration. PC/AT-Compatible Computer CPU: Pentium II-class or higher, 300MHz or faster. RAM: 32MB memory (64MB or more recommended). n If you are using Windows 2000 operating system, you need 64MB or more memory. A spare PCI expansion slot for a SCSI card (if one
ページ13に含まれる内容の要旨
Before Use For Macintosh computers OS: Mac OS 8 or later. CPU: PowerPC G3, 300MHz or faster. RAM: 32MB (64MB or more recommended). CD-ROM drive. n Many Apple Macintosh computers have built-in SCSI connectors. However, if your Macintosh does not have a built-in SCSI connector, you will need to purchase a PCI bus SCSI card. (Yamaha recommends Adaptec’s PowerDomain 2930U card.) n For details about how to install the SCSI card, refer to the documentation that came with it. n When you use the CD wri
ページ14に含まれる内容の要旨
Before Use Supported Discs The CRW2100SX drive can write to discs that carry the following logos. *1 CD-R discs The CRW2100SX drive can write to these discs at 1X, 2X, 4X, 8X, 12X, or 16X speed. These discs can be played back in a CD-ROM drive or a CD player. n 16X-speed writing is enabled with Partial CAV method. (P. 2) n When writing at 8X or faster speeds, use “high-speed writing capable” discs. *2 CD-RW discs There are two types of CD-RW discs: those that support write/rewrite speeds of 1X,
ページ15に含まれる内容の要旨
Before Use About CD-ROM A CD-ROM disc is a compact disc containing high-density read-only data. It has many applications, including the playback of music and video, the archiving of data, as well as on-line documentation. The following are descriptions of each CD-ROM format: CD-DA: Up to 79 minutes of stereo audio is written in 16-bit resolution at a sampling rate of 44.1kHz for a 79 minutes disc. Data CD: Up to 700 megabytes of computer data is stored in standard ISO9660 format for a 700MB dis
ページ16に含まれる内容の要旨
Front and Rear of Unit Front Panel The CRW2100SX drive’s front panel features the following: Power switch Manual Eject hole Eject button Disc tray Press this button to Only use this if no other The tray is used to Press this button power up the drive method is available for when you need to hold the disc. It slides or to turn it off. unloading a disc. (P. 25) out from the drive unit open or close the tray. (P. 24) when a disc needs to be loaded or unloaded. (P. 24) Headphone jack Headpho
ページ17に含まれる内容の要旨
Front and Rear of Unit Rear Panel The CRW2100SX drive’s rear panel features the following: TERMINATOR switch LINE OUT (L/R) This enables the drive’s To listen to audio CDs with built-in SCSI termination. your drive, connect these to Switch this to “ON” if your the line-level input (LINE IN) drive is the last device on of your stereo equipment AC IN socket the SCSI chain. Otherwise, using a standard stereo Connect the included switch it to “OFF.” (P.13) phono cable (sold power cable here
ページ18に含まれる内容の要旨
Setup Flowchart These flowcharts show the procedure for setting up the CRW2100SX drive. For easy cross-referencing, the relevant pages in this manual are also given. Windows Users STEP STEP Purchase a SCSI card Do you have a SCSI card? 1-1 Recommended models: NO 1 Adaptec AHA-2940-series (PCI) YES STEP Check that the SCSI card is STEP Install the SCSI card 1-2 recognized correctly (P.22) Read this manual and insert the 2 SCSI card into the appropriate PCI slot on the computer. STEP Set up th
ページ19に含まれる内容の要旨
Setup Flowchart Macintosh Users STEP STEP Does your Macintosh have Purchase a SCSI card 1-1 Recommended model: a built-in SCSI connector? NO 1 Adaptec PowerDomain 2930U (PCI) YES STEP STEP Set up the CRW2100SX drive Install the SCSI card 1-2 Read this manual and insert the 1. Set the switches at the rear of the drive. 2 (P.12, 13) SCSI card into the appropriate PCI slot on the computer. 2. Connect the SCSI and power cables, then switch the drive on. (P.18-20) STEP Check that the CRW2100SX d
ページ20に含まれる内容の要旨
Setup Procedures Serial Number Once you have taken the CRW2100SX drive out of its packaging, you should immediately note down the serial number found at the rear of the drive under the bar code. You may need to refer to this number when requesting Customer Support services. In the box below the following diagram, write down the 10- character serial number (consisting of 3 letters followed by 7 digits). Serial number (3 letters and 7 digits) Serial No. SCSI Settings Before connecting your CRW21
