ページ1に含まれる内容の要旨
2-Port SuperSpeed USB 3.0
PCI-e Host Card
User’s Manual
Model: UGT-PC302
All brand names and trademarks are properties of their respective owners.
w w w . v a n t e c u s a . c o m
ページ2に含まれる内容の要旨
Description The Vantec 2-Port PCI-e SuperSpeed USB 3.0 Host Card upgrades any desktop computer to the newest USB 3.0 standard. Integrated with the latest SuperSpeed USB 3.0 technology, transferring files to an USB 3.0 external hard disk is faster than ever with transfer speeds of up to 5Gbps. Back up important data such as HD video, high resolution photos to an external USB 3.0 in a fraction amount of time. Backwards compatible, the 2-Port PCI-e SuperSpeed USB 3.0 Host Card allows the u
ページ3に含まれる内容の要旨
Ports Model: UGT-PC302 Ports: 2 x External USB 3.0 Ports (Backwards Compatible with USB 2.0 & 1.1) Power: 15-pin SATA Power Connector (Required) 67 x 120 x 20mm Dimensions: OS Support Microsoft Windows ® XP/Vista/7 System Requirements Windows® XP, Vista, & 7 32/64 bit PCI Express Enabled Computer System w/ Available PCI Express Slot Available PCI-e slot Package Contents 1 x 2-Port SuperSpeed USB 3.0 PCI-e Host Card 1 x User’s Manual 1 x Driver CD 1 x Low Profile Br
ページ4に含まれる内容の要旨
Layout Before installing the Vantec 2-Port SuperSpeed USB 3.0 PCI-e Host Card, please see the photo below highlighting the available USB 3.0 ports of the card. Note: Make sure to connect a SATA power to P3 as additional power is required to function. Hardware Installation 1. Turn off and unplug the power cable from the back of the UGT-PC302 Page 4
ページ5に含まれる内容の要旨
computer as well as any other attached devices. 2. Remove the cover to access the internal hardware of the computer (refer to the manufacture of the computer system/case documentation for more details). 3. Locate a free PCI Express slot and remove the metal cover plate on the rear of the computer case. (2-Port PCI-e SuperSpeed USB 3.0 Host Card will fit and work with any PCI Express slot whether it be a x1, x4, x8, x16 slot. Performance may vary with each slot.) 4. When installing the 2
ページ6に含まれる内容の要旨
New Hardware Wizard'. 2. Cancel the automatic driver installation and run the Setup.exe located on the Driver CD. Note: Setup.exe can also be found and downloaded from our website at www.vantecusa.com. 3. Run installer setup.exe on Driver CD “X:\UGT-PC302\” to have the latest driver for 32/64bit Windows. (where X is the drive path for your CD-ROM drive) 4. When installation of the driver is complete, please reboot the system as prompted to complete the driver installation. Note: When
ページ7に含まれる内容の要旨
Warranty The 2-Port SuperSpeed USB 3.0 PCI-e Host Card comes with a 1 year limited warranty (90 day parts). If your unit becomes defective within that time frame, please go to www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also, check for any cosmetic flaws. If any parts are missing or if there are cosmetic d
