ページ1に含まれる内容の要旨
TS60GSSD25D-M
TS60GSSD25D-M
TS60GSSD25D-M
TS120GSSD25D-M 2.5” Solid State Drive
TS120GSSD25D-M
TS120GSSD25D-M
Description Features
Transcend 2.5” SATA II solid state drive is a huge • Fully SATA II 3.0Gbps compatible
capacity, high speed, and low power consumption
• Non-volatile Flash Memory for outstanding data
without moving parts which design for take the place
retention
of traditional hard disk drive. It provides fast read and
• Built-in DRAM cache buffer
write performance f
ページ2に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Specifications Physical Specification 2.5-inch HDD Form Factor Storage Capacities 60GB and 120GB Length 100.00 ± 0.40 Dimensions (mm) Width 69.85 ± 0.20 Height 9.50 ± 0.20 Input Voltage 5V ± 5% Weight 91g ± 2g Connector SATA 7+15 pins combo connector Environmental Specifications 0 ℃ to 70 ℃ Operating Temperature Storage Temperature - 40 ℃ to 85 ℃ Power Requireme
ページ3に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Reliability Data Reliability Supports BCH ECC 8 ,12 or 16bits/sector 10 years Data Retention MTBF 1.5M hours 60GB: 75.7 years @ 20GB write/day Endurance 120GB: 151.4 years @ 20GB write/day Vibration Operating 5.0G, 15 – 800Hz 5.0G, 15 – 800Hz Non-Operating * Note: Reference to the IEC 60068-2-6 Testing procedures; Operating-Sine wave, 5-800Hz/1 oct., 1.5mm, 3g, 0.5
ページ4に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Package Dimensions Below figure illustrates the Transcend 2.5” SATA Solid State Drive. All dimensions are in mm. 4 Transcend Information Inc. Preliminary V1.0
ページ5に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Pin Assignments Pin No. Pin Name Pin No. Pin Name 01 GND 02 A+ 03 A- 04 GND 05 B- 06 B+ 07 GND 08 NC 09 NC 10 NC 11 GND 12 GND 13 GND 14 5V 15 5V 16 5V 17 GND 18 DAS/DSS 19 GND 20 NC 21 NC 22 NC Pin Layout 22 1 8 7 5 Transcend Information Inc. Preliminary V1.0
ページ6に含まれる内容の要旨
SATA Connector TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Block Diagram SATA SATA II 3.0Gb/s 32bits SSD DRAM Controller 16bits 16bits 16bits 16bits Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash 6 Transcend Information Inc. Preliminary V1.0
ページ7に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Reliability Wear-Leveling algorithm The controller supports static/dynamic wear leveling. When the host writes data, the controller will find and use the block with the lowest erase count among the free blocks. This is known as dynamic wear leveling. When the free blocks' erase count is higher than the data blocks', it will activate the static wear leveling, replacing the not
ページ8に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Supported ATA Command Lists 8 Transcend Information Inc. Preliminary V1.0
ページ9に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M SMART SMART subcommand sets In order to select a subcommand the host must write the subcommand code to the device's Features Register before issuing the SMART Function Set command. The subcommands are listed below. SMART Read Data (subcommand D0h) This subcommand returns the device's Attribute Values to the host. The Attribute Values consist of 512bytes. Device Attribut
ページ10に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Attribute ID Numbers * indicates that the corresponding Attribute Values is fixed value for compatibility. SMART Save Attribute Values (subcommand D3h) This subcommand causes the device to immediately save any updated Attribute Values to the device's Attribute Data sector regardless of the state of the Attribute Autosave feature. SMART Execute Off-line Immediately (subc
ページ11に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Error log data structure Command data structure 11 Transcend Information Inc. Preliminary V1.0
ページ12に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Error data structure State field values Self-test log structure N is 0 through 20. The data structure contains the descriptor of the Self-test that the device has performed. Each descriptor is 24 bytes long and the self-test data structure is capable to contain up to 21 descriptors. After 21 descriptors has been recorded, the oldest descriptor will be overwritten wi
ページ13に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Selective self-test log structure SMART Write Log Sector (subcommand D6h) This command writes 512 bytes of data to the specified log sector. LBA Low and Sector Count registers shall be set to specify the log address and sector number to be written. SMART Enable Operations (subcommand D8h) This subcommand enables access to all SMART capabilities. Prior to receipt of a SMART
ページ14に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M SMART Return Status (subcommand DAh) This subcommand is used to communicate the reliability status of the device to the host's request. Upon receipt of the SMART Return Status subcommand the device saves any updated Attribute Values to the reserved sector, and compares the updated Attribute Values to the Attribute Thresholds. SMART Enable/Disable Automatic Off-line (subcommand
ページ15に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M the drive can be unlocked using the master password. If the user password is lost and Maximum security level is set, it is impossible to access data. However, the drive can be unlocked using the ERASE UNIT command with the master password. The drive will erase all user data and unlock the drive. SATA Optional Features Power Segment Pin P11 Pin P11 of the power segment of the
ページ16に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Identify Device Parameters Word Contents Description 0 0C5Ah General information 1 3FFFh Number of logical cylinders 2 C837h Specific configuration 3 0010h Number of logical heads 4 – 5 0 Retired 6 003Fh Number of logical sectors per logical track 7 – 8 0 Reserved 9 0000h Retired 10 -19 XXXX Serial number(20 ASCII characters) 20 0000h Retired 21 4000h Buffer Memo
ページ17に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M 80 00E0h Major Version Number 81 0000h Minor Version Number 82 346Bh Command sets supported 83 7D21h Command sets supported 84 4022h Command set/feature supported extension 85 3469h Command set/feature enabled 86 3C01h Command set/feature enabled 87 4022h Command set/feature default 88 407Fh Ultra DMA transfer 89 0000h Time required for security erase unit compl
ページ18に含まれる内容の要旨
TS60GSSD25D-M TS60GSSD25D-M TS60GSSD25D-M TS120GSSD25D-M 2.5” Solid State Drive TS120GSSD25D-M TS120GSSD25D-M Ordering Information -S = SLC -M = MLC Form Factor Transcend Product 25D = 2.5 " SATA w/ DRAM Capacity Solid State Drive 60GB or 120GB The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use o
