ページ1に含まれる内容の要旨
2. Insert the drive
Slide the carrier or tray into the appropriate bay in your host system. This
connects the drive directly to your system’s 40-pin Fibre Channel single
Cheetah X15 FC Installation Guide
connector attachment (FC-SCA). The FC-SCA connector is normally
Model ST318451FC, Fibre Channel interface disc drive
located on a Fibre Channel backpanel.
Note. There are no jumpers or terminators on the drive, and power is sup-
Publication Number: 83329487, Rev. B, September 2000
plied through
ページ2に含まれる内容の要旨
4. Format the drive Seagate support services The drive has been low level formatted at the factory. You do not need to For online information about Seagate products, visit www.seagate.com or e- perform another low level format on this drive unless you decide to perform mail your disc questions to DiscSupport@Seagate.com certain diagnostics through the host adapter. If you do decide to perform a If you need help installing your drive, consult your dealer first. If you need low level format, do no