ページ1に含まれる内容の要旨
Note. Figure 1 shows a generic carrier. Most carriers will look different than
the one shown. Many are actually small enclosures rather than
brackets as shown here.
2. Insert the drive
Slide the carrier or tray into the appropriate bay in your host system. This
Cheetah 10K.7 FC Installation Guide
connects the drive directly to your system’s 40-pin Fibre Channel single
ST3300007FC/FCV, ST3146707FC/FCV, ST373207FC/FCV connector attachment (FC-SCA). The FC-SCA connector is normally
located on a Fib
ページ2に含まれる内容の要旨
4. Format the drive Seagate support services The drive has been low level formatted at the factory. You do not need to For online information about Seagate products, visit www.seagate.com or perform another low level format on this drive unless you decide to perform e-mail your disc questions to DiscSupport@Seagate.com. certain diagnostics through the host adapter. If you do decide to perform a If you need help installing your drive, consult your dealer first. If you need low level format, do no
