ページ1に含まれる内容の要旨
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Barracuda 5400.1 Family
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST340015ACE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ultra ATA Interface Drives
. . . . . .
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Barracuda 5400.1 Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ST340015ACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ultra ATA Interface Drives . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
© 2003–2004 Seagate Technology LLC All rights reserved Publication number: 100256414, Rev. G May 2004 Seagate, Seagate Technology, and the Seagate logo are either registered trademarks or trademarks of Seagate Technology LLC. Barracuda, DiscWizard, SeaFONE, SeaShell, SeaShield, SeaTDD, and 3D Defense System are either registered trademarks or trademarks of Seagate Technology LLC. Other product names are registered trademarks or trademarks of their owners. Seagate reserves the right to change, wi
ページ5に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G iii Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary table . . . . . . . . . . . . . . . . . . . . . . . 3 2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.3 Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ページ6に含まれる内容の要旨
iv Barracuda 5400.1 Product Manual, Rev. G 4.1.1 Supported ATA commands. . . . . . . . . . . . . . . . 29 4.1.2 Identify Device command . . . . . . . . . . . . . . . . . 31 4.1.3 Set Features command. . . . . . . . . . . . . . . . . . . 36 4.1.4 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . 38 5.0 Seagate Technology support services . . . . . . . . . . . . . . . . . . . 39
ページ7に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G v List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . 11 Figure 2. Typical 12V startup and operation current profile . . . . . . . . 11 Figure 3. Breather filter hole location . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 4. Master/slave jumper settings . . . . . . . . . . . . . . . . . . . . . . . 23 Figure 5. Ultra ATA cable connectors . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 6. Moun
ページ8に含まれる内容の要旨
vi Barracuda 5400.1 Product Manual, Rev. G
ページ9に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G 1 1.0 Introduction This manual describes the functional, mechanical and interface specifications ® ® for Seagate Barracuda 5400.1 ST340015ACE model drives. This drive provides the following key features: Low power consumption. High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5. Giant magnetoresistive (GMR) recording heads and EPRML technology provide the drives with increased areal density. State-of-
ページ10に含まれる内容の要旨
2 Barracuda 5400.1 Product Manual, Rev. G
ページ11に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G 3 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient con- ditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate ST340015ACE model drives. 2.1 Specification summary table The specifications listed in this table are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual.
ページ12に含まれる内容の要旨
4 Barracuda 5400.1 Product Manual, Rev. G Drive specification ST340015ACE 6 Formatted Gbytes (x10 bytes) 40 Guaranteed sectors 78,165,360 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Physical read/write heads 1 Discs 1 Recording density BPI (bits/inch max) 475,127 Track density TPI (tracks/inch max) 94,000 2 Areal density (Mbits/inch max) 49,888 Spindle speed (RPM) 5,800 Internal data transfer rate (Mbits/sec) 511 I/O data transfer rate
ページ13に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G 5 Drive specification ST340015ACE Idle mode (typical) 5.0 watts Standby mode (typical) 1.4 watts Sleep mode (typical) 1.0 watts Voltage tolerance (including noise) 5V +/- 5%; 12V +/- 10% Ambient temperature 0° to 60°C (operating) –40° to 70°C (nonoperating) Temperature gradient (°C per hour max) 20°C (operating) Relative humidity 5% to 90% (operating) 5% to 95% (nonoperating) Relative humidity gradient 30% per hour max Wet bulb temperature (°C max) 33 (ope
ページ14に含まれる内容の要旨
6 Barracuda 5400.1 Product Manual, Rev. G 2.2 Formatted capacity Formatted Guaranteed Model capacity sectors Bytes per sector ST340015AC 40 Gbytes 78,165,360 512 E 2.3 Default logical geometry Cylinders Read/write heads Sectors per track 16,383 16 63 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consec- utively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above. 2.4 Physical organization Drive Model Read/write heads Number of discs
ページ15に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G 7 2.5 Recording and interface technology Interface ATA Recording method GPRML detector with NPML post processor Recording density BPI (bits/inch max) 475,127 Track density TPI (tracks/inch max) 94,000 2 Areal density (Mbits/inch max) 49,888 Spindle speed (RPM) (± 0.2%) 5,800 Internal data transfer rate (Mbits/sec) 511 I/O data transfer rate (Mbytes/sec max) 16.6 (PIO mode 4) 100 (Ultra DMA mode 5) Interleave 1:1 Cache buffer 2 Mbytes (2,048 kbytes) 2.6 Phy
ページ16に含まれる内容の要旨
8 Barracuda 5400.1 Product Manual, Rev. G 2.7 Seek time Seek measurements are taken with nominal power at 25°C ambient temper- ature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: Track-to-track seek time is an average of all possible single-track seeks in both directions. Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead. Typical seek times (msec)
ページ17に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G 9 2.9.1 Power consumption Power requirements for the drives are listed in the table on page 10. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed. Seek mode During seek mode, the read/write actuator arm moves toward a specif
ページ18に含まれる内容の要旨
10 Barracuda 5400.1 Product Manual, Rev. G Average 5V typ 12V typ Power dissipation (watts) (watts, 25° C) amps amps Spinup — 1.20 (max) 2.0 (max) Idle 5.0 0.46 0.23 Idle* (with offline activity) 8.2 1.11 0.22 Operating 40% r/w, 40% seek, 20% inop. 6.6 0.59 0.30 Seeking 7.3 0.47 0.39 Standby 1.4 0.24 0.02 Sleep 1.0 0.16 0.02 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
ページ19に含まれる内容の要旨
Barracuda 5400.1 Product Manual, Rev. G 11 2.9.1.1 Typical current profile 3.0 2.5 +5 Volt Current during spindle start — Typical Amperes 2.0 Amps 1.5 1.0 0.5 0.0 0 18 2 4 6 8 10 12 14 16 Seconds Figure 1. Typical 5V startup and operation current profile 6.0 5.0 +12 Volt Current during spindle start — Typical Amperes 4.0 Amps 3.0 2.0 1.0 0.0 0.0 2 4 6 8 10 12 14 16 18 Seconds Figure 2. Typical 12V startup and operation current profile
ページ20に含まれる内容の要旨
12 Barracuda 5400.1 Product Manual, Rev. G 2.9.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injec
