ページ1に含まれる内容の要旨
Product Manual
Barracuda 7200.11 Serial ATA
ST31000340AS ST3640330AS
ST31000640AS ST3640630AS
ST3750330AS ST3500320AS
ST3750630AS ST3500620AS
ST3500820AS
100452348
Rev. G
January 2009
ページ2に含まれる内容の要旨
Revision history Revision Date Sheets affected or comments Rev. A 08/30/07 Initial release. Rev. B 11/12/07 4-7, 9, 11, 15 & 21. Rev. C 01/18/08 2, 4, 6, 9 and 10. Rev. D 02/21/08 4, 6 and 13. Rev. E 05/14/08 front cover, 1, 3, 6, 10-11, 17, 19 and 31. Rev. F 10/21/08 1, 20, 27-28 and 30-32. Rev. G 01/08/09 11 and 19. Copyright © 2007-2009 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100452348, Rev. G, January 2009 Seagate, Seagate Technology and the Wave lo
ページ3に含まれる内容の要旨
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Formatted capacity . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
ii Barracuda 7200.11 Serial ATA Product Manual, Rev. G
ページ5に含まれる内容の要旨
List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 3. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 4. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Barracuda 7200.11 Serial ATA model drives: ST31000340AS ST3750330AS ST3640330AS ST3500320AS ST31000640AS ST3750630AS ST3640630AS ST3500620AS ST3500820AS These drives provide the following key features: • 7,200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). • Perpendicular recording, Tunneling Magnetoresistive (TMR) record
ページ8に含まれる内容の要旨
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
ページ9に含まれる内容の要旨
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST31000340AS ST3750330AS ST3640330AS ST3500320AS ST31000640AS ST3750630AS ST3640630AS ST3500620AS ST3500820AS Specification summary tables The specifications listed in the following tables are for quick reference. For details on specifi
ページ10に含まれる内容の要旨
Table 1: Drive specifications summary for 1000 and 750 Gbyte models Drive specification ST31000340AS ST31000640AS ST3750330AS ST3750630AS Formatted capacity (512 bytes/sector)* 1000 Gbytes 750 Gbytes Guaranteed sectors 1,953,525,168 1,465,149,168 Heads 8 6 Discs 4 3 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1090 kbits/in max Track density 150 ktracks/in avg 2 Areal density 164 Gbits/in avg Spindle speed 7,200 RPM Int
ページ11に含まれる内容の要旨
Drive specification ST31000340AS ST31000640AS ST3750330AS ST3750630AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.9 bels (typical) 3.1 bels (max) Performance Seek 3.2 bels (typical) 33 bels (max) Quiet Seek 3.1 bels (typical) 3.2 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Fail
ページ12に含まれる内容の要旨
Table 2: Drive specifications summary for 640 Gbyte models Drive specification ST3640330AS ST3640630AS Formatted capacity (512 bytes/sector)* 640 Gbytes Guaranteed sectors 1,250,284,896 Heads 6 Discs 3 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1090 kbits/in max Track density 150 ktracks/in avg 2 Areal density 164 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer rate 1287 Mbits/sec max Sustained data transf
ページ13に含まれる内容の要旨
Drive specification ST3640330AS ST3640630AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.9 bels (typical) 3.1 bels (max) Performance Seek 3.2 bels (typical) 33 bels (max) Quiet Seek 3.1 bels (typical) 3.2 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warra
ページ14に含まれる内容の要旨
Table 3: Drive specifications summary for 500 Gbyte models Drive specification ST3500320AS ST3500620AS ST3500820AS Formatted capacity (512 bytes/sector)* 500 Gbytes Guaranteed sectors 976,773,168 Heads 4 Discs 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1090 kbits/in max Track density 150 ktracks/in avg 2 Areal density 164 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer rate 1287 Mbits/sec max Sustained d
ページ15に含まれる内容の要旨
Drive specification ST3500320AS ST3500620AS ST3500820AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.7 bels (typical) 2.9 bels (max) Performance Seek 3.1 bels (typical) 3.2 bels (max) Quiet Seek 3.0 bels (typical) 3.1 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR
ページ16に含まれる内容の要旨
2.1 Formatted capacity Formatted Guaranteed Model Bytes per sector capacity* sectors ST31000340AS 1000 Gbytes 1,953,525,168 512 ST31000640AS ST3750330AS 750 Gbytes 1,465,149,168 512 ST3750630AS ST3640330AS 640 Gbytes 1,250,284,896 512 ST3640630AS ST3500320AS ST3500620AS 500 Gbytes 976,773,168 512 ST3500820AS *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.1.1 LBA mode When address
ページ17に含まれる内容の要旨
2.4 Physical characteristics Maximum height (1000-500 GB models) 26.1 mm (1.028 inches) Maximum width 101.6 mm (4.000 +/- 0.010 inches) Maximum length 146.99 mm (5.787 inches) Typical weight 1000 GB models 677 grams (1.493 lbs) 750 & 640 GB models 633 grams (1.396 lbs) 500 GB models 543 grams (1.199 lbs) Cache buffer ST31000340AS, ST3750330AS, ST3640330AS and ST3500320AS 32 Mbytes (32,768 kbytes) ST31000640AS, ST3750630AS, ST3640630AS and ST3500620AS 16 Mbytes (16,384 kbytes) ST3500820AS 8 Mb
ページ18に含まれる内容の要旨
2.7 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 4 on page 22. 2.7.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operat
ページ19に含まれる内容の要旨
2.7.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile Barracuda 7200.11 Serial ATA Product Manual, Rev. G 13
ページ20に含まれる内容の要旨
2.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. • Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equival
