Quantum Fireball STの取扱説明書

ページ1に含まれる内容の要旨

Fireball ST
Mounting Guidelines

3.5 inch Form Factor Drive Mounting


Mounting Screw Tap Locations
The mounting holes on Quantum 3.5-inch form factor hard disk drives allow the drive to be mounted in any
orientation. The figure provided identifies the location of the three mounting holes found on each side of the drive
and the four mounting holes found on the PCB side of the drive. Dimensions given are in inches and millimeters.



Mounting Screw Clearance
Please note that th

ページ2に含まれる内容の要旨

Fireball ST fireball_st_mounting.pdf Ventilation Quantum 3.5-inch hard disk drives operate without the need of an additional system cooling fan, provided the ambient air temperature does not exceed 131°F (55°C). Clearance from the drive to any other surface above and below must be a minimum of 1/16 inch (1.25 mm) to allow airflow. 2 of 2