ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Safety Precautions .......................................................................................... 1 Identification of parts ...................................................................................... 2 Indoor Unit / Operation and display ............................................................. 3,4 Remote controller ......................................................................................... 5,6 Operation instructions / Modes......................
ページ3に含まれる内容の要旨
Use 230V/60Hz or 115V/60Hz power supply only . Do not turn off the power supply cir- Keep the power supply circuit breaker Depending on the electrical specifi- cuit breaker or pull out the unit power and power plug free from any type of cations of your unit, use only 230V/ cord during unit operation. This may debris. If using a power supply cord, be 60Hz or 115V/60Hz power supply. cause electrical hazards and/ or a fire. sure to connect to plug firmly. This will Failure to do so may result in el
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
- 3 -
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
- 9 -
ページ12に含まれる内容の要旨
- 10 -
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
- 14 -
ページ17に含まれる内容の要旨
Specifications PERFORMANCE RATINGS MODEL KFS-12G KFR-12G KFR-18G KFR-24G Capacity Cooling [BTU/h] 12000 12400 18500 23100 12000 12800 18800 23266 Capacity Heating [BTU/h] 10.5 10.5 10.2 10.4 SEER 2.9 2.9 3.1 5.2 Moisture Removal[Pts/h] 340/450/520 340/450/520 690/810/900 890/1100/1200 Air Flow Sound Rating Indoor dB <42 <42 <44 <45 Sound Rating Outdoor dB <52 <52 <58 <59 Operating Range - Cooling [F] 60 to 109 60 to 109 60 to 109 60 to 109 Operating Range - Heating [F] 28 to 75 28 to 75 28 to 75
ページ18に含まれる内容の要旨
- 16 -
ページ19に含まれる内容の要旨
Installation instructions Select the installation locations Indoor unit installation location: l Locate indoor unit so that there is not obstruction near the supply air or return air outlets. l The wall that the indoor unit hangs on must be free from internal obstructions to facilitate a clear hole for the refrigeration lines and condensate line to go through. l Proper clearances must be maintained to ceilings and walls per instructions on page 16. l Easy access must be maintained for removal of
ページ20に含まれる内容の要旨
Installation instructions 3. Indoor unit refrigeration line installation l The refrigeration lines and wiring can be routed to the outdoor unit in a number of ways (left or right from the back of the unit), by using the cut-out access pieces on the casing of the unit. l Bend the refrigeration lines carefully to the required positon in order to be aligned with the drilled hole. piping direction cut-out access Note: When installing the refrigeration lines at the directions 1, 2 or 4, Saw the cut-o