ページ1に含まれる内容の要旨
Hard Disk Drive (HDD)
Installation Instructions
c53_105_hdd.jpg
for HDD Part Number 70043502
59387901
ページ2に含まれる内容の要旨
Copyright Information © 2006 by Oki Data Americas, Inc. All rights reserved. Document Information Hard Disk Drive (HDD) Installation Instructions P/N 59387901 June, 2006 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and
ページ3に含まれる内容の要旨
Installation 1. Turn off the printer (1). 2. Unplug the power cord (2). 3. Detach the interface cable from the back of the printer (3). C6100_1.jpg 3
ページ4に含まれる内容の要旨
4. Open the top cover. C6100_2.jpg 5. Open the front cover. C6100_3.jpg 4
ページ5に含まれる内容の要旨
6. Loosen the thumbscrew holding the printer side cover in place. C6100_4.jpg 5
ページ6に含まれる内容の要旨
7. Lift up on the ends. Remove the side panel from the printer. C6100_5.jpg 6
ページ7に含まれる内容の要旨
8. Locate the slot (1) on the control board shield. C6100_10.jpg 7
ページ8に含まれる内容の要旨
9. Remove the HDD from its shipping package. 10. Insert the top of the HDD cage into the slot on the control board shield. C6100_11.jpg 8
ページ9に含まれる内容の要旨
11. Tighten the thumbscrews (1) to secure the HDD. C6100_12.jpg 12.Insert the HDD cable firmly into the connector. C6100_13.jpg 9
ページ10に含まれる内容の要旨
13.Replace the side panel on the printer. Use the thumbscrew to secure the panel. C6100_4.jpg 14.Close the front cover. C6100_15.jpg 10
ページ11に含まれる内容の要旨
15.Close the top cover. C6100_16.jpg 16.Attach the interface cable. 17.Plug in the power cord. 18.Turn on the printer. 11
ページ12に含まれる内容の要旨
Verify the Installation Print the MenuMap Note: The MenuMap is a list of the current menu settings. Keypad.jpg 1. Press + one or more times until INFORMATION MENU appears on the display. 2. Press ENTER twice. The MenuMap prints. 3. Look at the top of the printout. HDD: installed should appear. If it doesnt (you see HDD: uninstalled) Repeat the Installation steps until it does. 12
ページ13に含まれる内容の要旨
Change the Driver Setting ® Windows Postscript Emulation Driver 1. Click Start → Settings → Printers [Printers and Faxes for XP]. 2. Right click the appropriate printer icon. Click Properties. Windows XP, 2000 and NT 4.0 a. Click the Device Settings tab. b. Scroll down to Installable Options. Click Hard Disk. Windows Me and 98 a. Click the Device Options tab. b. Scroll down to Installable Options. Click Printer Hard Disk. 3. Select Installed 4. Click OK. Close the Printers (Printers and
ページ14に含まれる内容の要旨
PCL Driver 1. Click Start → Settings → Printers [Printers and Faxes for XP]. 2. Right click the PCL printer icon. Click Properties. 3. Click the Device Option tab. 4. Click Printer Hard Disk. 5. Click OK. Close the Printers (Printers and Faxes) dialog box. ® Macintosh Mac OS 9.1+ 1. Activate Chooser from the Apple menu. 2. Select LaserWriter 8. 3. Click Printer → Setup. 4. Click Configure. 5. Select Hard Disk in the Change drop-down menu. 6. Change the setting of the next drop-dow
ページ15に含まれる内容の要旨
Mac OS X to X.1 No activation is required. Mac OS X.2 1. Activate Print Center from Local Hard Drive → Applications → Utilities → Print Center. 2. Highlight the printer name. Select from the menu Printers → Show Info. 3. Choose Installable Options from the drop down menu. 4. Click the box next to Hard Disk to enable the option. 5. Click Apply Changes. Exit to the desktop. Macintosh OS X.3+ 1. Activate the Printer Setup Utility from Local Hard Drive → Applications → Utilities → Print
ページ16に含まれる内容の要旨
Oki Data Americas, Inc. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Phone: (800) 654-3282 FAX: (856) 222-5320 www.okiprintingsolutions.com 59387901
