ページ1に含まれる内容の要旨
IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0
2.5” Hard Drive Enclosure
PHR-S250UAB
User’s Manual
ページ2に含まれる内容の要旨
CONTENTS INTRODUCING FIREWIRE/ USB2.0 HI-SPEED ENCLOSURE 3 About this Guide 3 System Requirements 3 Package Contents 4 Safety Precautions 4 HARDWARE BASIC 6 HARDWARE INSTALLATION 7 SOFTWARE INSTALLATION 10 Software Installation for MasOS X 10.1.x to 10.7.x and above 10 FireWire Connection for MasOS X 10.1.x to 10.7.x and above 10 USB2.0 Connection for MasOS X 10.1.x to 10.7.x and above 10 Software Installation for PC 11 IEEE 1394A and 1394B FireWire Connection for 11 WindowsXP/Vista/Windows7 USB
ページ3に含まれる内容の要旨
Introducing IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure-PHR-S250UAB Thank you for choosing the PHR-S250UAB portable IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure. This portable size enclosure support 2.5” SATA Hard drive. It is simple to install and comes with all the parts you need to create a external IEEE 1394A and 1394B FireWire/ Hi-Speed USB2.0 device. About This Guide Before you begin using the PHR-S250UAB, be sure to read this man
ページ4に含まれる内容の要旨
Package Contents The PHR-S250UAB portable IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure package includes the following software and documentation: • 6 pin to 6 pin FireWire Cable • 9 pin to 9 pin FireWire Cable • USB2.0 cable • IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure Safety Precautions ON INSTALLATION 1. To reduce the risk of fire or electric shock, do not expose this product to rain, water or moisture. 2. Do not place any containers
ページ5に含まれる内容の要旨
ON TRANSPORTATION Save the packing materials as you may need to repack and transport the unit at a later date. Always remove the disc before moving the unit. ON POWER SOURCES When you are not using the unit for a long time, disconnect the power cord from the unit. To unplug the AC power adapter from the wall outlet, grasp the adapter itself. Do not pull the cord. Warning If any of the following conditions occur, immediately disconnect the power cord from the wall outlet and contact your dealer o
ページ6に含まれる内容の要旨
Hardware Basic Precaution: 1) Please connect the enclosure directly to your computer. 2) Please make sure your hand is dry and remove static from your body by touching metal parts of your computer chassis. Enclosure Sleeve Circuit Board Bottom Tray Back Panel LED Power Connector USB Data 1394B FireWire Data Cable connector Cable connector 1394A FireWire Data Cable connector Package Content: Enclosure Sleeve 1 USB Data Cable Circuit Board 1 FireWire Data Cable (1394A) Back Panel 1 FireWire Dat
ページ7に含まれる内容の要旨
Hardware Installation 1. Unscrew to loosen the Enclosure Back Panel. 2. Remove the Back Panel from the Enclosure. 3. Use both thumbs to push the Bottom Tray out. 7
ページ8に含まれる内容の要旨
4. Align the pins on the hard drive to the 22PIN SATA connector, and push the drive in completely. (b) (a) 5. (a) Seat the Circuit Board and hard drive on the Bottom Tray. (b) Secure the hard drive with Screws (5mm in diameter) on the bottom of the tray. (a) (b) hard drive & circuit board Bottom Tray 6. Align the Bottom Tray to the Sleeve Slot. Slide and push the hard drive/ Bottom Tray into the Enclosure Sleeve. 8
ページ9に含まれる内容の要旨
7. Put the Back Panel back to the Enclosure. 8. Secure the Back Panel with 2 screws (3mm in diameter) from each side. 9. Connect the Enclosure directly to the computer by using the USB or FireWire cable and it is now ready to use. 9
ページ10に含まれる内容の要旨
Software Installation Software Installation for MasOS X 10.1.x to 10.7.x and above FireWire Connection for MasOS X 10.1.x to 10.7.x and above When the enclosure is connected to the computer, MasOS X 10.1.x to 10.7.x and above will recognize it automatically, initialize (if the drive is not initialized) and mount the drive to desktop. USB Connection for MasOS X 10.1.x to 10.7.x and above When the enclosure is connected to the computer, MasOS X 10.1.x to 10.7.x and above will recognize it autom
ページ11に含まれる内容の要旨
Software Installation for PC IEEE1394 FireWire Connection for WindowsXP/Vista/Windows7 Plug the IEEE 1394 cable into any available port, WindowsXP/Vista/ Windows7 will start installing for the proper driver. Please follow the on screen instruction to complete the driver installation. (You may need the Windows CD during the installation.) USB Connection for WindowsXP/Vista/Windows7 Plug the USB cable into any available port, WindowsXP/Vista/ Windows7 will start installing for the proper drive
ページ12に含まれる内容の要旨
SATA HARD DRIVE PARTITION and FORMAT PROCEDURES in PC For WindowsXP/Vista/Windows 7 If you can see a new entry under Disk drives of Device Manager, you are ready to partition and format the drive. 1. Open Control panel, “Administrative Tools” and “Computer management”. Step 2 2. Click on “Disk Management”. Step 3 12
ページ13に含まれる内容の要旨
3. “Write Signature and Upgrade Disk Wizard” windows will show up and click “Next”. Step 4 4. Write a signature to the new drive, click “Next”. Step 5 5. Click “Finish” to close the wizard. 13
ページ14に含まれる内容の要旨
6. Select the new “Unallocated” disk, and then right click to choose “Create partition”. Step 7 7. Follow the onscreen instruction to partition and fully format the drive. *note: If it assigns a new hard drive letter but format dose not run automatically, please exit “Computer Management”, and find the new drive letter in My computer to format it completely. 14
