ページ1に含まれる内容の要旨
Installation Guide
DataTraveler Locker+ Generation 3
®
Find the language and latest documentation for your Kingston DTLPG3 here.
DTLPG3 Installation Guide
. . . . . . . . . . . For instruc . tions in English
. . . . . . . . . . . . P . ar . . a instruc . . . ciones en español
. . . . . . . . Für A . nleitungen in Deutsch
. . . . . . . . . . . . P . our des instruc . . . . . tions en français
. . . . . . . . . . . . P .
ページ2に含まれる内容の要旨
® DataTraveler Locker+ G3 User Manual ® Document No. 480G3001-001.A00 DataTraveler Locker+ G3 Page 1 of 22
ページ3に含まれる内容の要旨
Table of Contents About This User Guide ............................................................................................................ 3 System Requirements ............................................................................................................. 3 Recommendations .................................................................................................................. 3 Setup (Windows Environment) .....................................
ページ4に含まれる内容の要旨
About This User Guide ® This user manual covers the DataTraveler Locker+ G3 (referred to simply as DTL+ G3 from this point forward) based on the factory image with no implemented customizations. System Requirements PC Platform PC Operating System Support ® Pentium III (or faster) processor equivalent Windows 7 ® 15MB free disk space Windows Vista SP2 ® USB 2.0 / 3.0 port Windows XP SP3 Two consecutive drive letters after the last Windows 8 / 8.1 (RT not
ページ5に含まれる内容の要旨
Setup (Windows Environment) 1. Insert the DTL+ G3 into an available USB port on your notebook or desktop and wait for Windows to detect it. Windows XP users will receive a ‘Found New Hardware’ notification as seen in Figure 2.1. Figure 2.1 – Found New Hardware (Windows XP) Windows Vista/7 users will receive a device driver notification as seen in Figure 2.2. Once the new hardware detection is complete, Windows will begin the initialization process.
ページ6に含まれる内容の要旨
automatically.) Device Initialization (Windows Environment) 1. Select your language preference from the drop-down menu and click ‘Next’ (Figure 3.1.) Figure 3.1 – Language Selection 2. Review the license agreement and click ‘Next’ (Figure 3.2.) (Note: You must accept the license agreement before continuing; otherwise the ‘Next’ button will remain disabled.) Figure 3.2 – License Agreement ® Document No. 480G3001-001.A00 DataTraveler Locker+ G3 Page 5 of 22
ページ7に含まれる内容の要旨
3. Create a password to protect your data on the DTL+ G3. Enter it in the ‘Password’ field, then re-enter it in the ‘Password Confirmation’ field, as seen below in Figure 3.3. The password you create must meet the following criteria before the initialization process will allow you to continue: 1. Passwords must contain 6 characters or more (up to 16 characters.) 2. Passwords must contain three (3) of the following criteria options: - UPPER CASE, lower case, numeric, and/or sp
ページ8に含まれる内容の要旨
4. Enter your contact information into the text boxes provided (see Figure 3.4) (Note: The information you enter in these fields may NOT contain the password string you created in Step 3. However, these fields are optional and can be left blank, if so desired.) The ‘Name’ field may contain up to 32 characters, but cannot contain the exact password. The ‘Company’ field may contain up to 32 characters, but cannot contain the exact password. The ‘Details’ field may contai
ページ9に含まれる内容の要旨
The DTL+ G3 will now format the secure data partition (Figure 3.5) and notify you when it is complete (Figure 3.6.) Note: If operating under Windows XP in Non-Admin mode, the ‘Format’ routine will take longer than formatting in Admin mode.* 6. Click ‘OK’ to continue. Figure 3.5 – Formatting DTL+ G3 Figure 3.6 – Format Complete Initialization complete. *Note: Times may vary based on system hardware and the capacity of the DTL+
ページ10に含まれる内容の要旨
Device Usage (Windows Environment) Once the DTL+ G3 has been initialized, you can access the secure data partition and utilize the device options by logging into the device with your password. To do so, follow these steps: 1. Insert the DTL+ G3 into a USB port on your notebook or desktop and enter your pass- word (see Figure 4.1.) 2. Once you’ve typed your password, click the ‘Login’ button to continue. If the correct password is entered, the Figure 4.1 – Login Win
ページ11に含まれる内容の要旨
Device Options (Windows Environment) While you are logged into the device, there will be a ‘DTL+ G3’ icon located in the right-hand corner of the Windows taskbar (Figure 5.1.) (Note: Windows 7/8.x users will need to click on the up-arrow button in the taskbar in order to access the ‘DTL+ G3’ icon (Figure 5.2.) Clicking once on the DTL+ G3 icon will display the following menu: Figure 5.2 – DTL+ G3 icon in taskbar Figure 5.1 – DTL+ G3 icon in taskbar (Windows 7/8/8.1
ページ12に含まれる内容の要旨
Browse DTL+ G3 Allows you to browse the contents of the secure data partition while you are logged in Format DTL+ G3* Allows you to format the secure data partition (Warning: All data will be erased.) (Figure 5.7) Online Support (Requires Internet access) Opens your Internet browser and navigates to http://www.kingston.com/support/ where you can access additional support information Figure 5.7 – Format Warning About DTL+ G3 Provides speci
ページ13に含まれる内容の要旨
Setup (Mac Environment) Insert the DTL+ G3 into an available USB port on your notebook or Figure 6.1 – DTLplus desktop and wait for the Mac operating system to detect it. When it does, you will see a DTLplus volume appear on the desktop, as seen in Figure 6.1. 1. Double-click the DTL+ G3 DVD-RW icon. 2. Double-click the Mac folder found in the window displayed in Figure 6.2. 3. Double-click the DTLplus application icon found in the window displayed in Figure 6.3. This will
ページ14に含まれる内容の要旨
Device Initialization (Mac Environment) 1. Select your language preference from the drop-down menu and click ‘Next’ (Figure 7.1.) Figure 7.1 – Language Selection 2. Review the license agreement and click ‘Next’ (Figure 7.2.) (Note: You must accept the license agreement before continuing; otherwise the ‘Next’ button will remain disabled.) Figure 7.2 – License Agreement ® Document No. 480G3001-001.A00 DataTraveler Locker+ G3 Page 13 of 22
ページ15に含まれる内容の要旨
3. Create a password to protect your data on the DTL+ G3. Enter it in the ‘Password’ field, then re-enter it in the ‘Password Confirmation’ field, as seen below in Figure 7.3. The password you create must meet the following criteria before the initialization process will allow you to continue: 1. Passwords must contain 6 characters or more (up to 16 characters.) 2. Passwords must contain three (3) of the following criteria options: - UPPER CASE, lower case, numeric, and/or specia
ページ16に含まれる内容の要旨
4. Enter your contact information into the text boxes provided (see Figure 7.4) (Note: The information you enter in these fields may NOT contain the password string you created in Step 3. However, these fields are optional and can be left blank, if so desired.) The ‘Name’ field may contain up to 32 characters, but cannot contain the exact password. The ‘Company’ field may contain up to 32 characters, but cannot contain the exact password. The ‘Details’ field may contain
ページ17に含まれる内容の要旨
The DTL+ G3 will now format the secure data partition (Figure 7.5) and notify you when it is complete (Figure 7.6.) 6. Click ‘OK’ to continue. Figure 7.5 – Formatting DTLocker+ G3 Figure 7.6 – Format Complete Initialization complete. ® Document No. 480G3001-001.A00 DataTraveler Locker+ G3 Page 16 of 22
ページ18に含まれる内容の要旨
Device Usage (Mac Environment) Once the DTL+ G3 has been initialized, you can access the secure data partition and utilize the device options by logging into the device with your password. To do so, follow these steps: 1. Insert the DTL+ G3 into a USB port on your notebook or desktop and enter your pass- word (see Figure 8.1.) 2. Once you’ve typed your password, click the ‘Login’ button to continue. If the correct password is entered, the DTL+ G3 will unlock and yo
ページ19に含まれる内容の要旨
Device Options (Mac Environment) While you are logged into the device, there will be a ‘DTLplus_Launcher’ icon located in the Mac OS X Dock as seen in Figure 9.1 below: Figure 9.1 – DTL+ G3 Icon In Mac OS X Dock Holding down the ‘control’ key on your keyboard and clicking once on the ‘DTLplus_Launcher’ icon will display the menu shown in Figure 9.2 to the right. DTL+ G3 Settings Allows you to change your password and/or hint (Figure 9.3) Figure 9.2 Allo
ページ20に含まれる内容の要旨
Browse DTL+ G3 Allows you to browse the contents of the secure data partition while you are logged in Format DTL+ G3 Allows you to format the secure data partition (Warning: All data will be erased.) (Figure 9.7) Online Support (Requires Internet access) Opens your Internet browser and navigates to http://www.kingston.com/support/ where you can access additional support information Figure 9.7 – Format Warning About DTL+ G3 Provides specific detail
