ページ1に含まれる内容の要旨
Liquid Crystal Projector
CP-S225W / CP-X275W
USER'S MANUAL
Please read this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung
aufmerksam.
MANUEL D'UTILISATION
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le
fonctionnement de l'appareil.
MANUALE D'ISTRUZIONI
Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter
compren
ページ2に含まれる内容の要旨
Liquid Crystal Projector USER'S MANUAL USER'S MANUAL Thank you for purchasing this liquid crystal projector. WARNING • Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear in thi
ページ3に含まれる内容の要旨
FEATURES FEATURES This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. Outstanding Brightness The UHB lamp and high-efficiency optical system assure a high level of brightness. Partial Magnification Function Interesting parts of images can be magnified for closer viewing. Distortion Correction Function Distortion-free images are quick
ページ4に含まれる内容の要旨
BEFORE USE (continued) BEFORE USE (continued) Part Names Zoom Knob Focus Ring Remote Control Sensor Power Switch Lens AC Inlet Slide Lens Door (to the Power Cord) Foot Adjuster Ventilation Openings Front / Left View (Intake) Control Panel (Refer to P.8 "OPERATIONS") LAMP Indicator RESET Button KEYSTONE Button TEMP Indicator POWER Indicator INPUT Button STANDBY/ON Button MENU Button Foot Adjuster Button Ventilation Openings Air Filter and Intake (Exhaust) (for the Cooling Fan) Speaker Rear Foot
ページ5に含まれる内容の要旨
BEFORE USE (continued) BEFORE USE (continued) Part Names (continued) VIDEO Button STANDBY/ON VIDEO RGB STANDBY/ON Button RGB Button KEYSTONE KEYSTONE Button MENU SELECT Button Button MENU SELECT Button POSITION Button Button MENU RESET POSITION Button RESET Button MENU Button MAGNIFY Button VOLUME Button MAGNIFY FREEZE VOLUME MAGNIFY Button VOLUME Button MUTE OFF MAGNIFY Button FREEZE Button OFF AUTO BLANK MUTE Button AUTO Button BLANK Button Battery Holder (Refer to Page.8 "OPERATIONS") Remote
ページ6に含まれる内容の要旨
INSTALLATION INSTALLATION Installation of the Projector and Screen Refer to the drawing and table below for determining the screen size and projection distance. The projection distances shown in the table below Screen are for full size (CP-S225W:800 x 600 dots / CP- X275W:1024 x 768 dots). a: Distance from the projector to the screen. (±10%) b: Distance from the lens center to the bottom of the screen. (±10%) Table 1. Installation Reference TOP VIEW a [inches (m)] Screen size b [inches (m)] [inc
ページ7に含まれる内容の要旨
INSTALLATION (continued) INSTALLATION (continued) Cabling Refer to the table below for connecting each terminal of the projector to a device. Table 2. Cabling Function Terminal Cable Accessory RGB cable or optional RGB Analog RGB input RGB cable with D-sub 15-pin shrink jack and inch thread screws RS-232C communication CONTROL Optional RS-232C cable Audio input AUDIO Optional audio cable with stereo mini jack (from the computer) COMPONENT VIDEO Y Component video input COMPONENT VIDEO CB/PB Acces
ページ8に含まれる内容の要旨
INSTALLATION (continued) INSTALLATION (continued) Power Connection Use the correct power cord depending on the power outlet to be used. Connect the AC inlet of the projector to the power outlet firmly by the power cord. Power outlet CAUTION • Be carful in handling the power cord according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual. • Connect the power cord firmly. Avoid using a loose, unsound outlet or failed contact. Power Cord AC Inlet Example of system se
ページ9に含まれる内容の要旨
OPERATIONS OPERATIONS STANDBY/ON Button POWER Indicator STANDBY/ON VIDEO RGB STANDBY/ ON Button KEYSTONE MENU SELECT Zoom knob MENU POSITION RESET Focus ring MAGNIFY FREEZE VOLUME Power Switch Slide Lens door Power ON 1. Check that the power cord is connected correctly. 2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned to orange. 3. Press the STANDBY/ON button on the control panel or the remote controller. Warm-up begins and the POWER indicator bli
ページ10に含まれる内容の要旨
OPERATIONS (continued) OPERATIONS (continued) Basic Operation The basic operations shown in Table 3 is performed from the supplied remote controller or the projector control panel. Items indicated by (*) may be used from the control panel. Table 3 . Basic Operation Item Description Select Input Signal (*) : Press the INPUT button. RGB→ VIDEO → S-VIDEO → COMPONENT (→ RGB) Select RGB Input : Press the RGB button. VIDEO/S-VIDEO/COMPONENT → RGB INPUT Select Video Input : Press the VIDEO button. SELE
ページ11に含まれる内容の要旨
OPERATIONS (continued) OPERATIONS (continued) Items indicated by (*) may be used from the control panel. Table 3. Basic Operation (continued) Item Description Volume Adjustment : Press the VOLUME / button. VOLUME reduces the volume ↔ increases the volume Set/Clear Mute Mode : Press the MUTE button. MUTE No sound is heard in the MUTE mode. Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE), and horizontal si
ページ12に含まれる内容の要旨
OPERATIONS (continued) OPERATIONS (continued) Setup Menu The following adjustments and settings are possible when SETUP is selected at the top of the menu. Part of the Setup menu differs between RGB input and video input. Select an item with the and buttons, and start operation. Use the Single menu to reduce menu size (see Table 3, MENU SELECT). SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. BRIGHT 0 BRIGHT 0 BRIGHT 0 CONTRAST -2 CONTRAST +1 CONTRAST +1 V POSIT 100 SHARPNES
ページ13に含まれる内容の要旨
OPERATIONS (continued) OPERATIONS (continued) Input Menu SETUP INPUT IMAGE OPT. The following functions are available when INPUT is selected on the AUTO EXECUTE RGB CANCEL menu. Select an item with the and buttons, and start operation. VIDEO HDTV Table 5. Input Menu Item Description Operation Start/Stop:Press the / button. Automatic Adjustment at RGB Input: Select the EXECUTE with the button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase (H.PHASE), and horizontal size (
ページ14に含まれる内容の要旨
OPERATIONS (continued) OPERATIONS (continued) Image Menu SETUP INPUT IMAGE OPT. The following adjustments and settings are available when IMAGE is BLANK MIRROR START UP selected on the menu. Select an item with the and buttons, and GAMMA COLOR TEMP start operation. Table 6. Image Menu Item Description Select Blank Screen Color: Select color with the and buttons. BLANK •The image is cleared and the entire screen is displayed in the selected color, when BLANK mode is set with BLANK ON, or when th
ページ15に含まれる内容の要旨
OPERATIONS (continued) OPERATIONS (continued) Options Menu SETUP INPUT IMAGE OPT. The following adjustments and settings are available when OPT. is VOLUME 16 MENU COLOR selected on the menu. Select an item with the and buttons, and LANGUAGE AUTO OFF start operation. SYNC ON G WHISPER . Table 7. Options Menu Item Description VOLUME Volume Adjustment: Reduce VOLUME ↔ Increase VOLUME MENU COLOR Select Menu Background Color: Select with the and buttons. Operation Start/Stop: Press the or button. LA
ページ16に含まれる内容の要旨
OPERATIONS (continued) OPERATIONS (continued) No Signal Menu VOLUME 16 BLANK The same adjustments and settings are available with the Image and MIRROR START UP Options menus when the MENU button is pressed during display of the MENU COLOR LANGUAGE “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE AUTO OFF SYNC ON G ON ***” message while no signal is received. WHISPER Table 8. No Signal Menu Item Description Volume Adjustment: Reduce VOLUME ↔ Increase VOLUME • When this function is used, au
ページ17に含まれる内容の要旨
MAINTENANCE MAINTENANCE Lamp HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE Contact your dealer before replacing the lamp. For the optional lamp, see the item “Optional Parts” of the Table 12. Before replacing the lamp, switch power OFF, remove the power cord from the power outlet, and wait approximately 45 minutes until the lamp has cooled. The lamp may explode if handled at high temperatures. WARNING • For disposal of used lamp, treat according to the instruction of community authorities. • Since
ページ18に含まれる内容の要旨
MAINTENANCE (continued) MAINTENANCE (continued) Replacing the Lamp 1. Switch the projector OFF, remove the power cord from the power outlet, and wait at least 45 minutes for the unit to cool. 2. Prepare a new lamp. 3. Check that the projector has cooled sufficiently, and gently turn it upside down. 4. Loosen the two screws as shown in the diagram, and remove the lamp cover. 5. Loosen the one screw, and gently remove the lamp while holding the grips. Touching the inside of the lamp case may resul
ページ19に含まれる内容の要旨
MAINTENANCE (continued) MAINTENANCE (continued) Air Filter Maintenance The air filter should be cleaned as described below at intervals of approximately 100 hours. 1. Switch the projector power supply OFF, and remove the power cord from the power outlet. 2. Clean the air filter with a vacuum cleaner. CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY INSTRUCTIONS” thoroughly to ensure that maintenance is
ページ20に含まれる内容の要旨
TROUBLESHOOTING TROUBLESHOOTING OSD Message The messages as described below may appear on the screen at power ON. Take the appropriate measures when such messages appears. Table 9. OSD Messages Message Contents The usage time of lamp will be reaching 2000 hr CHANGE THE LAMP AFTER REPLACING LAMP, shortly. RESET THE LAMP TIME. It is recommended to replace the lamp soon. Prepare a (*1) new lamp as a replacement. The usage time of lamp will be reaching 2000 hr shortly. It is recommended to replace
