ページ1に含まれる内容の要旨
USB 2.0 Rotating
4 Port Hub
INSTRUCTION MANUAL
97845 - green
97846 - blue
97847 - pink
www.jascoproducts.com
ページ2に含まれる内容の要旨
Table of Contents I. INTRODUCTION ................................3 II. OVERVIEW ........................................4 III. SAFETY INSTRUCTIONS .................5 IV. POWER MODE SETTING ................. 6 V. HARDWARE INSTALLATION ............7 VI. SOFTWARE INSTALLATION .............9 VII. TROUBLESHOOTING .....................10 VIII. TECHNICAL SPECIFICATIONS ....... 10 IX. FCC COMPLIANCE STATEMENT ... 12 X. LIMITED LIFETIME WARRANTY .... 13 2
ページ3に含まれる内容の要旨
I. Introduction Congratulations on the purchase of your GE USB 2.0 Rotating 4-port Hub! This GE Hub will allow you to receive the maximum possible bandwidth for all of your USB 2.0 and 1.1 devices! Please read this entire manual carefully before using your GE Rotating Hub. Follow the instructions to prevent damage to the Hub and/or the connecting devices. THIS PACKAGE INCLUDES: • USB 2.0 Rotating 4-Port Hub • USB 2.0 Extension Cable (6 feet) • User’s Manual 3
ページ4に含まれる内容の要旨
II. Overview GE Hub technology gives you the best of USB 1.1 and 2.0 in one Hi-Speed USB 2.0 Hub. Connect USB 2.0 devices for data transfer rates of up to 480 Mbps. At the same time connect USB 1.1 devices for a guaranteed 12 Mbps of bandwidth per device. Use any combination of USB 1.1 and 2.0 devices – this GE USB Hub will adapt to give you the greatest bandwidth possible for each device! FEATURES • USB 1.1 and 2.0 compatible • Full speed guaranteed for each USB 1.1 device • Optional
ページ5に含まれる内容の要旨
III. Safety Instructions Always read the Safety Instructions carefully. ➢ Keep this user’s manual for future reference. ➢ Keep this equipment away from humidity. ➢ Do not expose to moisture. ➢ Replace if dropped and damaged. ➢ Replace if you see obvious signs of breakage. ➢ If you cannot get it to work according to this User’s Manual refer to the Troubleshooting section of this manual (VIII) or contact technical support at www.jascoproducts.com. 5
ページ6に含まれる内容の要旨
IV. Power Mode Setting There are two power mode options for the GE Rotating USB 2.0 4-Port Hub. The fi rst is self-power mode (recommended), which requires the use of the optional AC power adapter (Available at Jascoproducts. com). In this mode, each port is provided with 500 milliamps, allowing for additional hubs, cameras and other high-powered devices. The second is bus-power mode, which does NOT require the use of the optional AC power adapter. In this mode, the hub is provided with 5
ページ7に含まれる内容の要旨
V. Hardware Installation Make sure your computer has all the nec- essary updates required to support USB. These can be found on Microsoft’s website. 1. Position the Hub as desired. 2. (Optional) Plug the optional AC power adapter into the Power Jack on the side of the USB 2.0 4-Port Hub. 7
ページ8に含まれる内容の要旨
V. Hardware Installation Note: Refer to Section IV for more details on ac power adapter use. 3. (Optional) Plug the optional AC power adapter into a standard electrical outlet or GE Surge Protector (recommended). The power LED should illuminate. Note: Refer to Section IV for more details. 4. Plug the A-type connector of the USB 2.0 device cable into the USB port of your computer. Plug the mini (B) type connector of the USB cable into the hub. 5. Connect your USB devices to any of the 4
ページ9に含まれる内容の要旨
VI. Software Installation Software installation is only required for ® Windows 98 and 98 SE users. Users of all other Operating Systems, including ® Windows 2000, VISTA, XP and any ® Mac OS, may skip this section. 1) Connect the hub to your computer. ® 2) Windows 98 and 98 SE will detect the hub and automatically run the “Add New Hardware Wizard”. 3) When the initial screen appears introducing the “Add New Hardware Wizard”, click Next. 4) Select “Search for the best driver for your dev
ページ10に含まれる内容の要旨
VII. Troubleshooting • Hub Not Seen ® Make sure you have installed all Windows updates and patches pertaining to USB. ® These are available on Microsoft’s website. Make sure all cables are properly connected. • Hub Not Working After Reboot Unplug the uplink cable (and the AC adapter cable if it is connected) from the hub. The uplink cable is plugged into the “Upstream Port” shown in section VI. Wait 2 seconds. Plug the cable(s) back in. • Hub Not Seen on a laptop USB 2.0 Hubs may not wor
ページ11に含まれる内容の要旨
VIII. Technical Specifi cations USB Hub: 4 Ports Standards: USB 1.1 and 2.0 Compatible ® Operating Systems: Windows 2000, VISTA, XP ® Mac OS X and above Data Speed: High: 480 Mbps Full: 12 Mbps Low: 1.5 Mbps Upstream Ports: Series A plug x 1 Downstream Ports: Series A receptacle port x 4 LEDs: 1 Power Indicator Power: Self-Power (AC Adapter): 500 milliamps Bus Power (No Adapter): 100 milliamps *A maximum of 1 high- powered device may be used without the AC power adapter. Dimension (L
ページ12に含まれる内容の要旨
IX. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there i
ページ13に含まれる内容の要旨
X. Limited Lifetime Warranty Jasco Products Co., Inc. warrants this product to be free from manufacturing defects regardless of how long you own it. This warranty is limited to the replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion o
ページ14に含まれる内容の要旨
Hub USB 2.0 giratorio de 4 puertos USB 2.0 Rotating MANUAL DE INSTRUCCIONES 97845 - verde 97846 - azul 97847 - rosa www.jascoproducts.com
ページ15に含まれる内容の要旨
Contenido I. INTRODUCCIÓN .................................... 3 II. GENERALIDADES .................................4 III. INSTRUCCIONES SOBRE SEGURIDAD ............................................................... 5 IV. CONFIGURACIÓN DE LA ENTRADA DE CORRIENTE .......................................... 6 V. INSTALACIÓN DEL HARDWARE .......... 7 VI. INSTALACIÓN DEL SOFTWARE ........... 9 VII. SOLUCIÓN DE PROBLEMAS ............. 10 VIII. ESPECIFICACIONES TÉCNICAS .......10 IX. DECLARACIÓN
ページ16に含まれる内容の要旨
I. Introducción ¡Felicitaciones por su compra del Hub 2.0 giratorio de 4 puertos! ¡Este Hub de GE le permitirá recibir el mayor ancho de banda posible con todos sus aparatos 2.0 y 1.1! Antes de usar su Hub giratorio GE, lea cuidadosamente todo el manual. Para evitar dañar el Hub o cualquier otro aparato que vaya a conectar, siga las instrucciones. EL PAQUETE INCLUYE: • Hub USB 2.0 giratorio de 4 puertos • Cable de extensión USB 2.0 (2 metros) • Manual del usuario 3
ページ17に含まれる内容の要旨
II. Generalidades La tecnología del Hub GE le permite usar lo mejor del USB 1.1 y 2.0 con un sólo Hub USB 2.0 de alta velocidad. Conecte sus aparatos USB 2.0 y transfi era sus datos a velocidades de hasta 480 Mbps. Y al mismo tiempo conecte sus aparatos USB 1.1 y obtenga un ancho de banda de 12 Mbps en cada aparato. Podrá usar sus aparatos USB 1.1 y USB 2.0 al mismo tiempo. ¡El Hub USB GE se puede adaptar para darle el mejor ancho de banda posible con cada uno de sus aparatos! CARACT
ページ18に含まれる内容の要旨
III. Instrucciones sobre seguridad Siempre lea con cuidado las instrucciones sobre seguridad. ➢ Guarde este manual para poder consultarlo en el futuro. ➢ Mantenga el equipo lejos de la humedad. ➢ No lo exponga al agua. ➢ Si el equipo se cae y se daña, reemplácelo. ➢ Si nota que el equipo está obviamente roto, reemplácelo. ➢ Si el equipo no funciona como lo indica el manual, consulte la sección de Solución de problemas en este manual (VIII) o comuníquese con el servicio técnico en www.jas
ページ19に含まれる内容の要旨
IV. Confi guración de la entrada de corriente El Hub 2.0 giratorio de 4 puertos GE tiene dos tipos de entrada de corriente. En el primer modo (recomendado), autoalimentado, el Hub necesita el adaptador opcional de corriente (disponible en Jascoproducts. com). En este modo, cada puerto cuenta con 500 miliamperios, lo que permite que se puedan usar Hubs, cámaras y otros aparatos adicionales de alta potencia. En el segundo modo, el Hub funciona con la energía del bus y NO necesita el ada
ページ20に含まれる内容の要旨
V. Instalación del Hardware Asegúrese de que su computadora tenga todas las actualizaciones necesarias para poder usar aparatos USB. Las podrá encontrar en la página web de Microsoft. 1. Coloque el Hub donde lo desee. 2. (Opcional) Conecte el adaptador opcional de corriente alterna a la toma de corriente que está a un lado del Hub USB 2.0 de 7
