ページ1に含まれる内容の要旨
Ver. 1A
Quick Installation Guide
3.5” USB2.0 SATA Enclosure
Model # AEN-U35SAB
Package Contents:
• 3.5” SATA Enclosure with
Stand
• Power adapter
• USB 2.0 Cable
• Quick Installation Guide
• Screwdriver and screw set
Section 1
Hard Drive Installation
Step 1 Use the provided screwdriver to remove the two screws on the right side
of the enclosure. Pull out the right panel.
ページ2に含まれる内容の要旨
Step 2 Attach the SATA connectors to your hard drive. Step 3 With the hard drive label facing up, attach the guides to both sides of the hard drive. The picture below shows how the guide being attached to the hard drive correctly. If the guides are not properly installed, the hard drive cannot be inserted into the enclosure case.
ページ3に含まれる内容の要旨
Step 4 Line up the guides with the case, and slide the hard drive back in. The enclosure should slide shut. Step 5 Secure the two screws that were removed in step 1. Step 6 Connect one end of the power cord to the back of the enclosure and connect the other end to a power outlet. Step 7 Connect one end of the USB cable to the enclosure and the other end to your computer. Step 8 Press the power button to turn the power ON.
ページ4に含まれる内容の要旨
The hard drive is now ready to use and you can find it under “My Computer”. Congratulations! The hard drive installation is complete. Note: If you do not see your hard drive under My Computer, please continue on Section 2. Section 2 Disk Management If your disk drive is brand new, you might not be able to see it under “My Computer” before it is formatted. Please go though the following steps to format the new drive. Step 1 Go to Control Panel > Administrative To
ページ5に含まれる内容の要旨
Step 3 Right click on the Unallocated disk and select New Partition from the menu.
ページ6に含まれる内容の要旨
Step 4 Click Next to start the New Partition Wizard. Step 5 Select the desired Partition Type and click Next.
ページ7に含まれる内容の要旨
Step 6 Enter the desired Partition Size and click Next. Step 7 Select Assign the following drive letter and select a letter for the new disk drive or you can select other options preferred. Click Next.
ページ8に含まれる内容の要旨
Step 8 Select the File system and change the Volume label or you can select other options preferred. Click Next to start formatting the hard drive. Step 9 Click Finish after the New Partition Wizard completed.
ページ9に含まれる内容の要旨
Go to My Computer, the new drive should be listed there. Section 3 Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Website: www.airlink101.com * Specifications are subject to change without notice. Photos of the product may not reflect the actual content. Hard disk compatibility and accessible capacity are not guaranteed. Copyright ©2010 AirLink101® All rights reserved. AirLink101, the stylized AirLink101 logo, specific produ