ページ1に含まれる内容の要旨
® ®
KVT8CATUV KVT1IP8CATUV
KVT16CATUV KVT1IP16CATUV KVT4IP16CATUV
NETWORKSERVICES
KVM Modules for ServView Rack Tray
High specification KVM switches that interface
precisely with the Black Box ServView Rack Tray
series.
Sophisticated KVM switching that use Server Access Module technology to simplify cabling and
avoid occupying a further rack slot
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week:
ページ2に含まれる内容の要旨
ServView KVM Module Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and ServView is a trademark, of BB Technologies, Inc. Mac is a registered trademark of Apple Computer, Inc. Linux is registered trademark of Linus Torvalds. Windows is a registered trademark of Microsoft Corporation. NetWare is a registered trademark of Novell, Inc. Sun is a trademark of Sun Microsystems, Inc. Unix is a registered trademark of UNIX System Laboratories, Inc. BSD is
ページ3に含まれる内容の要旨
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15
ページ4に含まれる内容の要旨
ServView KVM Module Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. T odas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. L as instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. T odas las instrucciones de operación y uso deben ser seguidas. 5. El ap
ページ5に含まれる内容の要旨
Table of Contents Contents 1. Power Adapter Specifications ..................................................................................................................................................... 6 2. Introduction ............................................................................................................................................................................... 7 2.1 What‘s Included ...........................................................................
ページ6に含まれる内容の要旨
ServView KVM Module 1. Power Adapter Specifications Power: DC jack (power adapter included) Input: 100–240 VAC, 50/60 Hz Output: 12VDC, 60W Page 6 724-746-5500 | blackbox.com
ページ7に含まれる内容の要旨
Chapter 2: Overview 2. Introduction Thank you for choosing this KVM module which provides full function 8 or 16 port KVM switching without occupying a further rack slot. The module is designed to fit at the rear of the Black Box ServView Rack Tray so that all circuitry is concealed behind the slide out screen and keyboard. Thanks to the use of Black Box Server Access Modules (SAMs) the rear connection panel of the KVM module is neat and unclut- tered. See Figure 2-1. Config switches Options p
ページ8に含まれる内容の要旨
ServView KVM Module 2.1 What‘s Included Your package should include the following items. If anything is missing or damaged, contact Black Box at 724-746-5500 or info@blackbox.com. • KVM module • Power adapter and power cord • CD-ROM containing this user manual in PDF format • Safety leaflet - Please carefully read this leaflet. 2.2 Additional Items You May Need • Upgrade (serial null modem) cable (6.5 feet) (P/N: EYN257T-XXXX-FF) Page 8 724-746-5500 | blackbox.com
ページ9に含まれる内容の要旨
Chapter 2: Overview 724-746-5500 | blackbox.com Page 9
ページ10に含まれる内容の要旨
ServView KVM Module 3. Installation 3.1 Mounting The KVM module is designed to interlock precisely with the rear of the ServView rack tray. 1 If the ServView rack tray is already fitted, either remove it or carefully gain access to the rear of the rack mount unit. ® 2 Locate the connection plate at the rear of the rack tray and orientate the KVM module so that its universal Centronics 36-pin connector aligns with the socket on the connection plate. See Figure 3-1. KVM module Locating pins ® Uni
ページ11に含まれる内容の要旨
EXT Chapter 3: Installation 3.2 Connections Connections to the rack tray video display, keyboard and trackpad are all handled by the single link that is made when the KVM module is attached to the tray. Therefore, all server, network and power connections are located at the rear of the unit. 3.2.1 EXTernal link (Network or Remote User) The single RJ-45 socket labeled as EXT is used to allow either global or remote users to login and control connected servers. The EXT port provides one of the f
ページ12に含まれる内容の要旨
8 7 6 5 4 3 2 1 COMPUTER CONNECTIONS ServView KVM Module 3.2.2 Server Access Module Links Dependant on the KVM module used, there will be either 8 or 16 RJ-45 sockets labeled as COMPUTER CONNECTIONS. Each socket supports a CAT 5, 5e or 6 link to an individual server system. Note: The maximum length of the cable can be up to 10 metres (32 feet), however, for KVM modules KVT8CATUV and KVT16CATUV ensure that the overall distance between a remote user (connected to a remote extender) and any ser
ページ13に含まれる内容の要旨
12V 5A 1 2 ON Chapter 3: Installation 3.2.3 Power Connection The KVM module is provided with a power adapter capable of supplying the display monitor, keyboard and KVM module. IMPORTANT: You must only use the manufacturer approved power adapter with the KVM module. IMPORTANT: Due to the length of the power cable, if the rack tray is mounted high in the rack it may not be possible to place the power adapter at floor level. In this case it is important to mount it securely and in such a manner t
ページ14に含まれる内容の要旨
ServView KVM Module 4. Configuration 4.1 Initial Configuration The precise details for configuration of the KVM module will depend on the model being used. For more information, please refer to the Configuration section of the appropriate ServSwitch user guide as appropriate to the KVM module being used: • KVT8CATUV or KVT16CATUV ---> use KV0081A/KV0161A (ServSwitch CX Uno) user guide, • KVT1IP8CATUV or KVT1IP16CATUV ---> use KV1081A/KV1161A (ServSwitch CX Uno IP) user guide, • KVT4IP16CATUV
ページ15に含まれる内容の要旨
Chapter 5: Operation 5. Operation In operation, you can select server channels in a number of ways, including: • On screen menu, • Keyboard hotkeys, • Control buttons on the ServView rack tray (see below). For more information about the on screen menu and keyboard hotkey methods, please refer to the Operation section of the appropriate ServSwitch user guide as appropriate to the KVM module being used: • KVT8CATUV or KVT16CATUV ---> use KV0081A/KV0161A (ServSwitch CX Uno) user guide, • KVT1IP8
ページ16に含まれる内容の要旨
ServView KVM Module Appendix A. Safety Information • You must only use the manufacturer approved power adapter with the KVM module. • For use in dry, oil free indoor environments only. • The module and its power supply generate heat when in operation and will become warm to the touch. Do not enclose them or place them locations where air cannot circulate to cool the equipment. Do not operate the equipment in ambient tempera- tures exceeding 35 degrees Centigrade. Do not place the products in co
ページ17に含まれる内容の要旨
Appendices 724-746-5500 | blackbox.com Page 17
ページ18に含まれる内容の要旨
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. ® ® NETWORKSERVICES About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or le
