ページ1に含まれる内容の要旨
JPM610A-R7
JPM612A-R7
JPM614A-R7
®
GigaTrue CAT6 Component Level Patch Panels
Make patching transitions from horizontal cable
®
BL A CK BOX
to typical stranded cable.
Meet Category 6 component performance requirements.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Infor
ページ2に含まれる内容の要旨
GigaTrue CAT6 Component Level Patch Panels 1. Specifications Standards — T568A and T568B Connectors — JPM610A-R7: (24) RJ-45, (24) 4-pair 110 punchdown; JPM612A-R7: (48) RJ-45, (48) 4-pair 110 punchdown; JPM614A-R7: (96) RJ-45, (96) 4-pair 110 punchdown Size — JPM610A-R7: 1.75"H (1U) x 19"W x 1.25"D (4.4 x 48.3 x 3.2 cm); JPM612A-R7: 3.5"H (2U) x 19"W x 1.25"D (8.9 x 48.3 x 3.2 cm); JPM614A-R7: 7"H (4U) x 19"W x 1.25"D (17.8 x 48.3 x 3.2 cm) Weight — JPM610A-R7: 1.4 lb. (0.6 kg);
ページ3に含まれる内容の要旨
GigaTrue CAT6 Component Level Patch Panels Figure 1. Color codes for T568A/TS568B wiring on the wiring label. NOTE: For best performance, keep the untwisted part of the wire less than 0.5 inches (1.3 cm) long. Using a punchdown tool, terminate each wire. Push the 110 punchdown tool to the edge of the 110 connector to trim the conductors. See Figure 2. Figure 2. Terminating the wire conductors. 724-746-5500 | blackbox.com Page 3
ページ4に含まれる内容の要旨
4. Optional: Place the stuffer caps on the terminated 110 blocks for added strain relief. 5. F inally, connect the patch cord. Plug the patch cord into the patch panel, then connect it to the network equipment. Installation is complete. About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7
