ページ1に含まれる内容の要旨
Quick Installation Guide
TV-IP212/TV-IP212W
TV-IP312/TV-IP312W
ページ2に含まれる内容の要旨
Table of Contents Table of Contents English ...................................................................................................... 1 1. Before You Start ................................................................................. 1 2. Hardware Installation ......................................................................... 3 3. Configure the Internet Camera .......................................................... 4 7 Troubleshooting ..........................
ページ3に含まれる内容の要旨
1. Before You Start Package Contents ? TV-IP212/TV-IP212W/TV-IP312/ TV-IP312W ? Quick Installation Guide ? Utility CD-ROM ? Camera Stand ? RJ-45 Cable ? AC Power Adapter (5V, 2.5A) ? 1 x 2dBi Detachable Antenna (TV-IP212W/TV-IP312W) System Requirements ? 10/100Mbps Ethernet ? CPU: 1GHz processor or above ? Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista) ? VGA Resolution: 800 x 600 or above ? Web Brower: Internet Exploreer (6.0 or higher) ? Windows Vista/XP/2000 1 English
ページ4に含まれる内容の要旨
Application 2-Way Audio Internet Camera Server (TV-IP212/TV-IP312) TV-IP212 TV-IP312 Cable/DSL 4-Port Broadband Router (TW100-S4W1CA)) Internet Notebook with Modem Mobile Phone with PC Card (TE100-PCBUSR) 3G Support & Service 10/100Mbps Wireless 2-Way Audio Internet Camera Server (TV-IP212W/TV-IP312W) TV-IP212W TV-IP312W Wireless Firewall Router (TEW-432BRP) Internet Notebook with Wireless PC Card Mobile Phone with Modem (TEW-421PC) 3G Support & Service 54Mbps 2 English
ページ5に含まれる内容の要旨
2. Hardware Installation 1. Attach the Antenna. (TV-IP212W/ TV-IP312W) 2. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port of the Internet Camera. 3. Connect external speaker to the Internet Camera Server (optional) 4. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 5. Connect USB flash drive to the Internet Camera Server (optional) 6. Verify the Power and Link LEDs are on (TV-IP3
ページ6に含まれる内容の要旨
3. Configure the Internet Camera Note: It is recommended that you configure the Internet Camera from a wired computer. Before the Internet Camera can be configured, a Static IP address must be assigned on your computer's network adapter in the subnet of 192.168.10.x. Since the Internet Camera's default IP address is 192.168.10.30, make sure no other network devices are assigned an IP address of 192.168.10.30. (Refer to the Troubleshooting section on how to configure TCP/IP settings on
ページ7に含まれる内容の要旨
4. Click Install. 5. Click Setup and then click Network. Configure the network settings to be in the same subnet as your network. Then click Apply. 6. Click Network and then click Wireless. Configure your wireless settings to match your wireless network's settings and then click Apply (Enable/Enter the WEP/WPA key when your wireless network is encrypted. Contact your network administrator for more information). (TV-IP212W/TV-IP312W only) 5 English
ページ8に含まれる内容の要旨
7. Disconnect the RJ-45 cable (TV-IP212W/TV-IP312W). 8. Verify the Power and Link LEDs are on. Note: The TV-IP212W/TV-IP312W will not work wirelessly until you disconnect the Ethernet cable from the back of the camera. 9. Click Live View. Then click MJPEG compression if you are using Firefox or Safari browser. Your installation is now complete. Note: For detailed information regarding the TV-IP212/TV-IP212W/TV- IP312/TV-IP312W configuration and advanced settings, please refer to the Troub
ページ9に含まれる内容の要旨
Troubleshooting Q1: How do I configure TCP/IP settings on my computer? 1. Go into the Control Panel and double-click the Network Connections icon, and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Use the following IP address, and make sure you assign your network adapter an IP address in the subnet of 192.168.10.x. Q2: The Image is blurry. How can I adjust the focus on the Inte
ページ10に含まれる内容の要旨
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling
ページ11に含まれる内容の要旨
TRENDnet Technical Support . US Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support . . . . . Europe (Germany France Italy Spain Switzerland UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDn
