Rosewill GIGABIT RC411の取扱説明書

ページ1に含まれる内容の要旨

Gigabit PCIe LAN Card RC411
User Manual

ページ2に含まれる内容の要旨

Gigabit PCIe LAN Card RC411 User Manual Features Designed to meet PCI Express Base Specification Revision 1.0a Single-lane (or x1) PCI Express throughput supports rates of 2.5Gbps Compliant with 10/100/1000 IEEE 802.3 specification 10/100/1000M data rate auto-negotiation LEDs indicate the status of data transmission Automatic MDI/MDIX crossover at all speed Support Wake On Lan(WOL) power management

ページ3に含まれる内容の要旨

Gigabit PCIe LAN Card RC411 User Manual Hardware Description LED Indicators The following table provides descriptions of the LED status and their meaning. LED Color Status Description ON The port is connecting with 100 100/ACT GREEN Mbps BLINK Receiving Packets ON The port is connecting with 1000 1000/ACT GREEN Mbps BLINK Receiving Packets Hardware Installation Follow the instruction given below

ページ4に含まれる内容の要旨

Gigabit PCIe LAN Card RC411 User Manual Driver Installation For Windows® 2000/XP/Server 2003 Once the Windows® 2000, XP and Server 2003 startup. Gigabit Ethernet PCI Express Card will be detected by system. Following is the procedures for installing Gigabit Ethernet PCI Express Card driver under Windows® XP Service Pack 2 operating system. 1. When Found New Hardware Wizard Window pop-up, please click “Cance

ページ5に含まれる内容の要旨

Gigabit PCIe LAN Card RC411 User Manual Verify Driver Installation Click on the “Device Manager” tab in System Properties, which you access from the Windows Control Panel. You should see an “Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC (Windows® 2000/XP/Server2003” or Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (NDIS 6.0) (Windows® Vista)” installed under “Network adapters” item. START

ページ6に含まれる内容の要旨

Gigabit PCIe LAN Card RC411 User Manual slot correctly. Please insert the card firmly into the PCI Express slot or try another slot. How to deal with a exclamation point on Ethernet Host controller 1. Please shutdown your computer and move the card to another available slot then re-install Gigabit Ethernet PCI Express Card driver again. 2. Please point on this device then right-chick on the mouse. 3. This