ページ1に含まれる内容の要旨
When you installing AGP card, please make sure the
following notice is fully understood and practiced. If your
AGP card has "AGP 4X notch"(show below), please make
sure your AGP card is AGP 4X (1.5V).
Do not use AGP 2X card (3.3V) in this motherboard. It will
®
burn and damage the motherboard due to Intel 845 chipset
can't support AGP 2X(3.3V).
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/
4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjus
ページ2に含まれる内容の要旨
? The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. ? Third-party brands and names are the property of their respective owners. ? Please do not remove any labels on motherboard, this may void the warranty of this motherboard. ? Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. ? Before you install PC
ページ3に含まれる内容の要旨
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsibl e Party Name:G.B.T. INC. (U.S .A.) Address: 17358 Railroad S treet City of Industr y, CA 91748 Phone/Fax No:(818) 854-9338/ (818) 854-9339 hereby declares that the product Pr oduct Name: Mother boar d Model Number : GA-8IDML Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementar y Infor mation: This device complies with part 15 of the FCC
ページ4に含まれる内容の要旨
Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-8IDML is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems cause of
ページ5に含まれる内容の要旨
GA-8IDML Series P4 Titan-SDRAM Motherboard USER’S MANUAL ® Pentium 4 Processor Motherboard Rev. 2.0 Sixth Edition 12ME-8IDML-2006
ページ6に含まれる内容の要旨
GA-8IDML Series Motherboard Table of Content Revision History ..............................................................................4 Item Checklist ..................................................................................4 WARNING! .......................................................................................5 Chapter 1 Introduction .......................................................................6 Summary of Features ............................................
ページ7に含まれる内容の要旨
Table of Content Integrated Peripherals .......................................................................................33 Power Management Setup ................................................................................40 PnP/PCI Configurations ......................................................................................44 PC Health Status ..................................................................................................46 Frequency/Voltage Control .......
ページ8に含まれる内容の要旨
GA-8IDML Series Motherboard Revision History Revision Revision Note Date 2.0 Initial release of the GA-8IDML Series motherboard user's manual. Jul.2001 2.0 Second release of the GA-8IDML Series motherboard user's manual. Aug.2001 2.0 Third release of the GA-8IDML Series motherboard user's manual. Sep.2001 2.0 Fourth release of the GA-8IDML Series motherboard user's manual. Nov.2001 2.0 Fifth release of the GA-8IDML Series motherboard user's manual. Dec.2001 2.0 Sixth release of the GA-8IDML Ser
ページ9に含まれる内容の要旨
WARNING! WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Hold co
ページ10に含まれる内容の要旨
GA-8IDML Series Motherboard Chapter 1 Introduction Summary of Features Form Factor ? 24.4cm x 22.4cm Micro ATX size form factor, 4 layers PCB. Motherboard ? GA-8IDML Series Motherboard: GA-8IDML and GA-8IDML-C ® ® CPU ? Socket 478 for Intel Micro FC-PGA2 Pentium 4 processor ® ® ??Support Intel Pentium 4 (Northwood, 0.13um) processor ® ? Intel Pentium 4 400MHz FSB ? 2nd cache depend on CPU Chipset ? Chipset 82845 HOST/AGP/Controller ? 82801BA(ICH2) I/O Controller Hub Memory ? 2 168-pin DIMM
ページ11に含まれる内容の要旨
Introduction On-Board LAN ? Build in RTL8100(B)L Chipset * On-Board Sound ? Creative CT5880 Sound Chipset * ? Line In/Line Out/Mic In/CD In/Game Port PS/2 Connector ? PS/2 Keyboard interface and PS/2 Mouse interace BIOS ? Licensed AWARD BIOS, 2M bit FWH Additional Features ? PS/2 Keyboard power on by password ? PS/2 Mouse power on ? STR(Suspend-To-RAM) ? Wake on LAN ? AC Recovery ? USB KB/Mouse wake up from S3 ? Supports @BIOS ? Supports Easy TuneIII Special Features ? Over Clock (CPU/PCI/AGP)
ページ12に含まれる内容の要旨
GA-8IDML Series Motherboard GA-8IDML Series Motherboard Layout CPU_FAN USB_VS KB_MS F_AUDIO SOCKET478 AUX_12V AC97 Brookdale AGP SYS CT5880* FAN PCI1 FWH ICH2 PCI2 CD_IN F_PANEL BATTERY PCI3 RTL8100* FRONT USB WOL CNR "*" Only for GA-8IDML. 8 MIC_IN LINE_OUT USB LINE_IN COMB COMA GAME LPT1 LAN* GA-8IDML(-C) DIMM1 DIMM2 IDE2 ATX IDE1 PWR_FAN W83627HF FLOPPY IR
ページ13に含まれる内容の要旨
Hardware Installation Process GA-8IDML-LE Motherboard Layout USB_VS CPU_FAN KB_MS SOCKET478 F_AUDIO AUX_12V AC97 Brookdale AGP SYS FAN PCI1 CD_IN1 FWH ICH2 PCI2 BATTERY PCI3 F_PANEL FRONT USB CNR WOL 9 MIC_IN LINE_OUT USB LINE_IN COMB COMA GAME LPT1 GA-8IDML-LE DIMM1 DIMM2 ATX IDE2 IDE1 PWR_FAN W83627HF FLOPPY IR
ページ14に含まれる内容の要旨
GA-8IDML Series Motherboard Chapter 2 Hardware Installation Process To set up your computer, you must complete the following setps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires, and power supply Step 5- Setup BIOS software Step 6- Install supporting software tools Step1 Step1 Step 2 Step 4 Step 4 Step 4 Step3 10
ページ15に含まれる内容の要旨
Hardw are Installation Process Step 1: Install the Central Processing Unit (CPU) Step 1-1:CPU Installation Pin1 indicator Pin1indicator CPU Top View CPU Bottom View Socket Actuation Lever Pin1 indicator 1. Pull up the CPU socket level 2. Locate Pin 1 in the socket and look and up to 90-degree angle. for a (golden) cut edge on the CPU upper corner. Then insert the CPU into the socket. 3. Press down the CPU socket lever and finish CPU installation. ? Please make sure the CPU type is supported by
ページ16に含まれる内容の要旨
GA-8IDML Series Motherboard Step 1-2: CPU Heat Sink Installation 2. Hook the other end of the 1. Hook one end of the cooler cooler bracket to the CPU bracket to the CPU socket first. socket. ? Please use Intel approved cooling fan. ? Make sure the CPU fan power cable is plugged in to the CPU fan connector, this completes the installation. ? Please refer to CPU heat sink user’s manual for more detail installation procedure. 12
ページ17に含まれる内容の要旨
Hardw are Installation Process Step 2: Install memory modules The motherboard has 2 dual in-line memory module (DIMM) sockets support 4 banks. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets. SDRAM 2. Insert the DIMM memory module 1. The DIMM slot has two notch, so the vertically into the DIMM slot. Then DIMM
ページ18に含まれる内容の要旨
GA-8IDML Series Motherboard Step 3: Install expansion cards 1. Read the related expansion card’s instruction document before install the expansion card into the computer. 2. Remove your computer’s chassis cover, necessary screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot bracket of the expansion card. 6. Replace your comp
ページ19に含まれる内容の要旨
Hardw are Installation Process Step 4: Connect ribbon cables, cabinet wires, and power supply Step 4-1: I/O Back Panel Introduction ? ? ? ? ? ? PS/2 Keyboard and PS/2 Mouse Connector PS/2 Mouse Connector ?This connector supports standard PS/2 (6 pin Female) keyboard and PS/2 mouse. PS/2 Keyboard Connector (6 pin Female) ? Parallel Port and Serial Ports (COMA/COMB) Parallel Port ?This connector supports 2 standard COM ports (25 pin Female) and 1 Parallel port. Device like printer can be connecte
ページ20に含まれる内容の要旨
GA-8IDML Series Motherboard ? Game /MIDI Ports ?This connector supports joystick, MIDI keyboard and other relate audio devices. Joystick/ MIDI (15 pin Female) ? Audio Connectors ? After install onboard audio driver, you may connect speaker to Line Out jack, micro phone to MIC In jack. Device like CD-ROM , walkman etc can be connected to Line-In jack. Line Out MIC In Line In ? USB/LAN Connector ?Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB
