ページ1に含まれる内容の要旨
Installation Guide
Publication number 16700-97023
November 2002
For Safety information and Regulatory information, see the pages behind the
index.
© Copyright Agilent Technologies 2000-2002
All Rights Reserved
Agilent Technologies
16700B-Series Logic Analysis
Systems
ページ2に含まれる内容の要旨
Installation at a Glance 16700B Overview 16700B Mainframe If ordered: Monitor Monitor Cable Monitor Power Cable Power Cable Keyboard & Mouse Training Board & Kit Additional Connections 16701A/B Expander Frame Printer & Cable External Disk Drive & Cable (Data Drive - Option 008) (Boot Drive - Option 009) 2
ページ3に含まれる内容の要旨
16702B Overview Training Board 16702B & Kit Mainframe Keyboard Power Cable & Mouse Additional Connections Orderable: Monitor Monitor Cable Monitor Power Cable External Disk Drive & Cable (Data Drive - Option 008) (Boot Drive - Option 009) Printer & Cable 16701A/B Expander Frame 3
ページ4に含まれる内容の要旨
4
ページ5に含まれる内容の要旨
Contents Installation at a Glance 1 General Information 9 To locate information on using the logic analyzer 10 To locate specifications and characteristics 11 To create a backup file of your system settings and license passwords 13 To reload system settings and license passwords 15 2 Connecting and Configuring Hardware 17 To connect the mouse, keyboard, and monitor 18 To configure a monitor for the 16700B 19 To configure an optional monitor for the 16702B 21 To change monitors (16700B or 16702B)
ページ6に含まれる内容の要旨
Contents Software Requirements 46 16517/18A Logic Analyzer (2-card module) 47 16517/18A Logic Analyzer (3-card module) 48 16517/18A Logic Analyzer (4-card module) 49 16517/18A Logic Analyzer (5-card module) 50 16557D Logic Analyzer (1-card module) 50 16557D Logic Analyzer (2-card module) 51 16557D Logic Analyzer (3-card module) 52 16557D Logic Analyzer (3-card module) 53 16557D Logic Analyzer (5-card module) 54 16710/11/12A Logic Analyzer (1-card module) 55 16710/11/12A Logic Analyzer (2-card mo
ページ7に含まれる内容の要旨
Contents Measurement Modules 71 16533/34A Oscilloscope Module (single or multi-card modules) 72 5 Installing Pattern Generator Measurement Modules 87 Software Requirements 88 16522A Pattern Generator (1-card module) 88 16522A Pattern Generator (2-card module) 89 16522A Pattern Generator (3-card module) 89 16522A Pattern Generator (4-card module) 90 16522A Pattern Generator (5-card module) 91 16720A Pattern Generator (1-card module) 92 16720A Pattern Generator (2-card module) 92 16720A Pattern Ge
ページ8に含まれる内容の要旨
Contents 100-pin Differential Probe (E5379A for analyzers with 90-pin pod connectors) 107 38-pin Single-ended Probe (E5380A for analyzers with 90-pin pod connectors) 108 Half-channel Adapter (E5386A) 109 Single-ended Flying Lead Probe Set (E5382A) 110 Soft Touch Probes (E5387A and E5390A for analyzers with 90-pin pod connectors) 111 7 Troubleshooting 113 To run self-tests 114 To execute disaster recovery procedures 115 8
ページ9に含まれる内容の要旨
1 General Information 9
ページ10に含まれる内容の要旨
Chapter 1: General Information To locate information on using the logic analyzer To locate information on using the logic analyzer Go to on-line help for information on using your logic analyzer. A pdf file of the on-line help is on the CD that came with your system if you want to print it out. 1 Select Help in the upper right corner of the screen and then select On Main System. 2 Select the task you need information about. . 10
ページ11に含まれる内容の要旨
Chapter 1: General Information To locate specifications and characteristics To locate specifications and characteristics The specifications and characteristics for your instrument and measurement module are in the on-line Help. 1 Select Help in the upper right corner of the screen and then select On Main System. 2 Select Using Measurement Tools and then select your instrument or measurement module from the list. 11
ページ12に含まれる内容の要旨
Chapter 1: General Information To locate specifications and characteristics 3 Under Interface Reference, select Specifications and Characteristics. 12
ページ13に含まれる内容の要旨
Chapter 1: General Information To create a backup file of your system settings and license passwords To create a backup file of your system settings and license passwords By saving your system settings to a flexible disk or a mounted directory, you create a backup file that can be used to quickly setup systems or to restore current system settings in case of problems. 1 Insert a flexible disk or set up a mounted directory. 2 Select the Tools icon from the menu bar. 3 Select the Admin tab and
ページ14に含まれる内容の要旨
Chapter 1: General Information To create a backup file of your system settings and license passwords 4 Select Flexible Disk or a Mounted Directory and then select OK. 14
ページ15に含まれる内容の要旨
Chapter 1: General Information To reload system settings and license passwords To reload system settings and license passwords 1 Insert the flexible disk or set up a mounted directory. 2 Select the Tools icon from the menu bar. 3 Go to the Admin tab and select Load. 15
ページ16に含まれる内容の要旨
Chapter 1: General Information To reload system settings and license passwords 4 Select Flexible Disk or Mounted Directory and select OK. If an item is not valid, or was not initially saved to the file, the selection will be grayed out in the interface. Also, if no file extension is added, a ‘.set’ extension is automatically added for you. 16
ページ17に含まれる内容の要旨
2 Connecting and Configuring Hardware 17
ページ18に含まれる内容の要旨
Chapter 2: Connecting and Configuring Hardware To connect the mouse, keyboard, and monitor To connect the mouse, keyboard, and monitor The 16700B must have the system mouse and keyboard connected for the system to boot up properly. Once enabled on the LAN, the system can be operated remotely without a keyboard or mouse. Use of a monitor is optional for the 16700B and 16702B. 1 Connect the mouse and keyboard to the back of the 16700B or 16702B. 2 Connect the optional monitor to the back of the
ページ19に含まれる内容の要旨
Chapter 2: Connecting and Configuring Hardware To configure a monitor for the 16700B 4 Allow a minimum of 5 cm spacing between instruments for proper cooling. 5cm 5cm 16700B 5cm 5cm 16702B To configure a monitor for the 16700B If you ordered the optional monitor with your logic analyzer, the monitor resolution setting is pre-configured for 1280 x 1024 at the factory. Use this procedure if you wish to configure an external monitor other than the optional monitor orderable with the 16700B. 1 C
ページ20に含まれる内容の要旨
Chapter 2: Connecting and Configuring Hardware To configure a monitor for the 16700B 3 Immediately press the TAB key. Press once per second for approximately 30 seconds. The monitor display will change on the screen every few seconds as the system cycles through the monitor resolution choices. 4 Press ENTER when you see a clear image to select your monitor choice and type ‘Y” to confirm. Clear Images 20
