ページ1に含まれる内容の要旨
EKI-2741F
10/100/1000Base-T to SFP
(mini-GBIC) Type Fiber
Optic Media Converter
EKI-2741SX
10/100/1000Base-T to
1000Base-SX SC Type
Fiber Optic Media
Converter
EKI-2741LX
10/100/1000Base-T to
1000Base-LX SC Type
Fiber Optic Media
Converter
User Manual
ページ2に含まれる内容の要旨
Copyright The documentation and the software included with this product are copyrighted 2007 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accu
ページ3に含まれる内容の要旨
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty a
ページ4に含まれる内容の要旨
Declaration of Conformity CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products. FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device
ページ5に含まれる内容の要旨
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or let
ページ6に含まれる内容の要旨
Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. 1. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. 2. Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components. EKI-27
ページ7に含まれる内容の要旨
Contents Chapter 1 Overview...........................................2 1.1 Introduction.........................................................2 1.1.1 Fast Fiber Converters Module ...................2 1.1.2 Dual Power Input.......................................2 1.1.3 Flexible Mounting ......................................2 1.1.4 Advanced Protection .................................2 1.1.5 Wide Operating Temperature ....................2 1.1.6 Easy Troubleshooting....................
ページ8に含まれる内容の要旨
EKI-2741F-SX-LX User Manual viii
ページ9に含まれる内容の要旨
Overview Sections include: Introduction Features Specifications Packing List Safety Precaution 1 Chapter1 CHAPTER
ページ10に含まれる内容の要旨
Chapter 1 Overview 1.1 Introduction The EKI-2741 is designed to convert Gigabit Ethernet networks to Gigabit fiber networks by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, EKI-2741 is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-2741 supports MDI/MDIX auto detection, so you don’t need to use crossover
ページ11に含まれる内容の要旨
1.2 Features • Provides 1 x SFP (mini-GBIC) type connector (EKI-2741F) • Provides 1 x 1000Base-SX or 1000Base-LX SC type connector (EKI-2741SX/LX) • Provides 1 x 10/100/1000Mbps Ethernet ports with RJ-45 connector • Supports full/half duplex flow control • Supports MDI/MDI-X auto-crossover • Supports surge (EFT) protection 3,000 V for power line DC • Supports 4,000 V Ethernet ESD protection DC • Embedded with a switch controller, supports auto-negotiation • Supports store & forward
ページ12に含まれる内容の要旨
1.3 Specification Communications IEEE 802.3, 802.3ab, 802.3u, 802.3x, Standard 802.3z 10/100/1000Base-TX, 1000Base-SX, LAN 1000Base-LX Multi-Mode Fiber: 550m (EKI-2741SX) Transmission Distance Single-Mode Fiber: 10km (EKI-2741LX) or SFP (mini-GBIC) Fiber: Up to 110km (EKI-2741F) Ethernet: Up to 100 meters (STP or UTP) Up to 1000 Mbps Transmission Speed Interface Fiber : 1 x SFP(mini-GBIC) fiber connector Connectors (EKI-2741F)
ページ13に含まれる内容の要旨
Environment -10 ~ 60 ℃ (14~140℉) Operating Temperature Wide temp. model: -40 ~ 75 ℃ (-40 ~ 167℉) -40 ~ 85 ℃(-40 ~ 185℉) Storage Temperature 5 ~ 95% (non-condensing) Operating Humidity 0 ~ 95% (non-condensing) Storage Humidity Certifications UL, 60950-1, CAN/CSA-C22.2 No.60950 Safety U.S.A.: FCC Part 15 CISPR 22 EMC EU: EN55011, EN61000-6-4 EN55022, Class A, EN61000-3-2/3 EN55024 IEC61000-4-2/3/4/5/6/8/11/12
ページ14に含まれる内容の要旨
1.4 Packing List • 1 x EKI-2741F or EKI-2741SX or EKI-2741LX Industrial Ethernet Switch • 1 x eAutomation Industrial Communication CD-ROM with software, and User manual • 2 x Wall Mounting Bracket and Screws • 1 x DIN-rail Mounting Bracket and Screws • 1 x EKI-2741F/SX/LX Startup Manual • 1 x DC Jack Cable φ2.0/150mm 1.5 Safety Precaution Attention IF DC voltage is supplied by an external circuit, please use a protection device on the power supply input. EKI-2741F-SX-LX Use
ページ15に含まれる内容の要旨
Installation Sections include: LED Indicators Dimensions Mounting Network Connection Power Connection 7 Chapter2 CHAPTER
ページ16に含まれる内容の要旨
Chapter 2 Installation In this chapter, you will be given an overview of the EKI-2741F/SX/LX hardware installation procedures. 2.1 LED Indicators There are few LEDs display the power status and network status located on the front panel of EKI-2741F/SX/LX, each of them has its own specific meaning as the table below. Table 2.1: EKI-2741F/SX/LX LED Definition LED Color Description On Power input 1 is active P1 Green Off Power input 1 is inactive On Power input 2 is activ
ページ17に含まれる内容の要旨
2.2 DIP-Switch The DIP-Switch is used to configure operation mode for LFP (Link Fault Pass- Through) and operation mode for UTP/Fiber port. The default value of DIP-switch is OFF. Table 2.2: EKI-2741series DIP-Switch Definition S/W No Status Description ON Enables Port/Power Alarm 1 OFF Disable Port/Power Alarm ON Enables LFP 2 OFF Disables LFP Link Fault Pass-Through (DIP-Switch 2): When LFP is enabled, it allows UTP link failures to be reported to the fiber side and also
ページ18に含まれる内容の要旨
2.3 Dimensions (units: mm) Figure 2.1: Front View of EKI-2741 series EKI-2741F-SX-LX User Manual 10
ページ19に含まれる内容の要旨
Figure 2.2: Side View of EKI-2741 series 11 Chapter2
ページ20に含まれる内容の要旨
Figure 2.3: Rear View of EKI-2741 series EKI-2741F-SX-LX User Manual 12
