ページ1に含まれる内容の要旨
KMS0972_Cover.fm Page 2 Wednesday, November 2, 2005 10:06 AM
• INSTRUCTION MANUAL
Inverter-Controlled Split System Air
Conditioner
MODE D’EMPLOI
Climatiseur de type séparé contrôlé par
inverseur
KMS0772
KMS0972
KMS1272
This air conditioner uses the new refrigerant R410A.
COOL/DRY Model
Save These Instructions!
Conserver ce mode d’emploi
© SANYO 2006
Pub. OI-85264180806000
ページ2に含まれる内容の要旨
01_KMS0972_En.fm Page 2 Monday, November 14, 2005 1:24 PM Features This air conditioner is an inverter type unit that automatically adjusts capacity as appropriate. Details on these functions are provided below; refer to these descriptions when using the air conditioner. • Microprocessor Controlled Operation Automatic Restart Function for Power Failure The interior compartment of the remote control unit Even when power failure occurs, preset contains several features to facilitate automat
ページ3に含まれる内容の要旨
01_KMS0972_En.fm Page 3 Monday, November 14, 2005 1:24 PM Contents Page Features............................................................................................................ 2 Product Information........................................................................................... 3 Alert Symbols.................................................................................................... 3 Installation Location .......................................................
ページ4に含まれる内容の要旨
01_KMS0972_En.fm Page 4 Monday, November 14, 2005 1:24 PM Installation Location We recommend that this air conditioner be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit. Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate. Do not install this air conditioner where there are fumes or flammable gases, or in an extreme
ページ5に含まれる内容の要旨
01_KMS0972_En.fm Page 5 Monday, November 14, 2005 1:24 PM Names of Parts Air intakes INDOOR UNIT Air outlet Remote control unit Drain hose Refrigerant tubes OUTDOOR UNIT Air outlet This illustration is based on the external view of a standard model. NOTE Consequently, the shape may differ from that of the air conditioner which you have selected. This air conditioner consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote control unit. Air Intake A
ページ6に含まれる内容の要旨
01_KMS0972_En.fm Page 6 Monday, November 14, 2005 1:24 PM Unit Display and Operation Button INDOOR UNIT IMPORTANT OPERATION lamp TIMER lamp Avoid using radio equipment QUIET lamp QUIET such as mobile phone near ION lamp (within 4 ft.) the remote control receiver. Some radio OPERATION button equipment may cause malfunction of the unit. If the trouble happens, disconnect power and restart REMOTE CONTROL receiver the air conditioner after a few minutes. REMOTE CONTROL receiver This sect
ページ7に含まれる内容の要旨
01_KMS0972_En.fm Page 7 Monday, November 14, 2005 1:24 PM Remote Control Unit (Display) Displayed when transmitting data Displayed when indoor unit sensor is in use Displayed when setting temperature Displayed when temperature is shown Displayed when setting timer Displayed when the time display is set to 12-hour time. Symbols (1) Operation mode (4) Timer 24-hour clock with ON/OFF MILD DRY .............................. program Timer........................ COOL...........................
ページ8に含まれる内容の要旨
01_KMS0972_En.fm Page 8 Monday, November 14, 2005 1:24 PM Remote Control Unit Sensor Transmitter (Cover closed) Display ON/OFF operation button ION button 1 HR. TIMER button Temperature setting buttons (TEMP.) MODE selector button QUIET button FAN SPEED selector button NIGHT SETBACK button FLAP button HIGH POWER button ON TIME Advance button OFF TIME Advance button setting setting Return button Return button buttons buttons CLOCK button CANCEL button Time display selector button SENSOR butt
ページ9に含まれる内容の要旨
01_KMS0972_En.fm Page 9 Monday, November 14, 2005 1:24 PM Remote Control Unit (continued) Temperature setting buttons Press the button to increase the set temperature. (TEMP.) Press the button to reduce the set temperature. The temperature setting changes by 1 °C or 2 °F each time one of the TEMP. buttons is pressed. QUIET button : When you press this button, the fan rotates slower than the fan speed setting to provide a quieter operating sound. MODE selector button Use this button to sel
ページ10に含まれる内容の要旨
01_KMS0972_En.fm Page 10 Monday, November 14, 2005 1:24 PM Remote Control Unit (continued) SENSOR button When you press this button (use a small-tipped object such as a ballpoint pen), the mark will appear at the display. And the room temperature is detected by the sensor which is built into the indoor unit and the air conditioner is controlled accordingly. NOTE If the remote control is located near a heat source, such as a space heater or in direct sunlight, press the SENSOR button to s
ページ11に含まれる内容の要旨
01_KMS0972_En.fm Page 11 Monday, November 14, 2005 1:24 PM Using the Remote Control Unit (continued) How to Use the Remote When using the remote control unit, always point the unit’s transmitter head Control Unit directly at the air conditioner’s receiver. Air conditioner (Indoor unit) Receiver Remote control (Transmitter head) unit Remote Control Unit The remote control unit may be operated either from a non-fixed position or from Installation Position a wall-mounted position. To ensure t
ページ12に含まれる内容の要旨
01_KMS0972_En.fm Page 12 Monday, November 14, 2005 1:24 PM Operation with the Remote Control Unit 1. Operation STEP 2 STEP 3 STEP 1 STEP 4 STEP 5 Check that the circuit breaker on the power panel is turned on. NOTE Press the setting buttons as described below and change the settings as desired. STEP 1 Press the MODE selector button and select the desired mode. For dehumidifying operation → For cooling operation → For fan only operation → STEP 2 To start the air conditioner, press the ON/OF
ページ13に含まれる内容の要旨
01_KMS0972_En.fm Page 13 Monday, November 14, 2005 1:24 PM Operation with the Remote Control Unit (continued) NOTE Choose the best position in the room for the remote control unit, which also acts as the sensor for room comfort and transmits the operating instructions. Once you’ve found this best position, always keep the remote control unit there. This appliance has a built-in 5-minute time delay circuit to ensure reliable operation. When the operation button is pressed, the compress
ページ14に含まれる内容の要旨
01_KMS0972_En.fm Page 14 Monday, November 14, 2005 1:24 PM Operation with the Remote Control Unit (continued) 4. Night Setback Mode Night Setback Mode is used for saving energy. Press the NIGHT SETBACK button while operation. The mark appears in the display. To release the night setback function, press the NIGHT SETBACK button again. In Cooling and DRY When the night setback mode is selected, the air conditioner automatically Mode: ( and ) raises the temperature setting 2 °F when 30 minu
ページ15に含まれる内容の要旨
01_KMS0972_En.fm Page 15 Monday, November 14, 2005 1:24 PM Operation with the Remote Control Unit (continued) 5. QUIET Mode QUIET Mode is used to reduce the fan sound of the indoor unit. Press the QUIET button. The mark appears in the display. To cancel, press QUIET button again. In QUIET Mode, the fan rotates at a slower speed than the fan speed setting. If the unit is already operating with a very low airflow, the fan sound may not change even if the QUIET button is pressed.
ページ16に含まれる内容の要旨
01_KMS0972_En.fm Page 16 Monday, November 14, 2005 1:24 PM Special Remarks ‘‘DRY’’ ( ) Operation How it works? Once the room temperature reaches the level that was set, the unit’s operation frequency is changed automatically. During DRY operation, the fan speed automatically runs at lower speed for providing a comfortable breeze. ‘‘DRY’’ operation is not possible if the indoor temperature is 59 °F or less. Cooling ( ) Operation Sometimes the indoor unit may not get to the set fan sp
ページ17に含まれる内容の要旨
01_KMS0972_En.fm Page 17 Monday, November 14, 2005 1:24 PM Setting the Timer NOTE In the descriptions below, the following settings are used for the temperature and time indicator selector button on the bottom front section of the remote control. Temperature: °F Time: AM, PM 1. How to set the present (Example) To set to 10:30 pm. time Operation Indication 1. Press the CLOCK button once if The time indication alone flashes. the time indicator is not flashing. 2. Press the Advance, Re
ページ18に含まれる内容の要旨
01_KMS0972_En.fm Page 18 Monday, November 14, 2005 1:24 PM Setting the Timer (continued) 3. How to set the ON time (Example) To start operation at 7:10 am. Operation Indication 1. Press the ON TIME setting The timer indication is displayed, button once. and the present ON time is shown. 2. Press the Advance, Return ( , The timer indication blinks. ) button until AM 7:10 is The time can be set in 10-minute displayed. increments. Holding down the button advances the time rapidly in 10-mi
ページ19に含まれる内容の要旨
01_KMS0972_En.fm Page 19 Monday, November 14, 2005 1:24 PM Using the 1-Hour OFF Timer 1. 1-Hour OFF Timer This function causes the unit to operate for one hour and then stop, regardless of whether the unit is on or off when this button is pressed. The indicator in the display indicates that this function is operating. Setting procedure: Regardless of whether the unit is operating or stopped, press the 1 HR. TIMER button. appears in the display. Cancellation procedure: Press the ON/OFF ope
ページ20に含まれる内容の要旨
01_KMS0972_En.fm Page 20 Monday, November 14, 2005 1:24 PM Adjusting the Airflow Direction 1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right. When the humidity is high, the vertical vanes should be in the front CAUTION position during the cooling or dehumidifying operation. If the vertical vanes are positioned all of the way to the right or left, condensation may begin to form around the air vent and drip down. 2. Vertic
