ページ1に含まれる内容の要旨
02
USER MANUAL
Type HD8772
Read carefully before using the machine.
Register your product and get support at
www.philips.com/welcome
02 EN
English
ページ2に含まれる内容の要旨
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. 4. Close supervision is necessary when the appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool
ページ3に含まれる内容の要旨
CAUTION This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user. Repair should be done by authorized service personnel only. 1. Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltag
ページ4に含まれる内容の要旨
2 ENGLISH Congratulations on your purchase of a Saeco Minuto Auto- matic Milk Frother full automatic coff ee machine! To fully benefi t from the support that Saeco off ers, please register your product at www.philips.com/welcome. This user manual applies to HD8772. The machine is made for preparing espresso and coff ee using whole coff ee beans and for dispensing steam and hot water. In this user manual you will fi nd all the information you need to install, use, clean and descale your mac
ページ5に含まれる内容の要旨
ENGLISH 3 CONTENTS INSTALLATION ................................................................................................. 4 Product Overview ...................................................................................................................................... 4 General Description ................................................................................................................................... 5 PREPARING FOR USE ..........................................
ページ6に含まれる内容の要旨
4 INSTALLATION Product Overview 12 3 4 5 6 7 8 9 21 10 11 12 13 14 24 22 15 16 17 18 19 20 23 33 26 29 27 30 28 31 25 32
ページ7に含まれる内容の要旨
ENGLISH 5 5 General Description 1. Grinder adjustment knob 2. Coff ee bean hopper 3. Pre-ground coff ee compartment 4. Water tank + Lid 5. Coff ee bean hopper lid 6. Control panel 7. Espresso / coff ee dispensing spout 8. Full drip tray indicator 9. Cup holder grill 10. Drip tray 11. Coff ee grounds drawer 12. Brew group 13. Coff ee residues drawer 14. Service door 15. Espresso/Coff ee selection lever 16. Steam wand + rubber grip for Automatic Milk Frother (also for hot water dispensing) 17.
ページ8に含まれる内容の要旨
6 ENGLISH PREPARING FOR USE Machine Packaging The original packaging has been designed and constructed to protect the machine during transport. We recommend keeping the packaging material for possible future transport. Machine Installation 1 Remove the machine from the packaging. 2 For best use, it is recommended to: • Choose a safe, level surface, where there will be no danger of over- turning the machine or being injured. • Choose a location that is suffi ciently well-lit, clean and near an
ページ9に含まれる内容の要旨
ENGLISH 7 7 5 Rinse the water tank with fresh water. 6 Fill the water tank with fresh water up to the MAX level and reinsert it into the machine. Make sure it is fully inserted. Caution: Never fi ll the water tank with warm, hot, sparkling water or any other liquid, as this may cause damage to the water tank and the machine. 7 Remove the coff ee bean hopper lid. 8 Slowly pour the coff ee beans into the coff ee bean hopper. Note: Do not pour too many coff ee beans into the coff ee bean hopp
ページ10に含まれる内容の要旨
8 ENGLISH Switch the power button to “I” to turn on the machine. The “ ” button 12 fl ashes. 13 To turn on the machine simply press the “ ” button. The control panel indicates that the circuit must be primed. USING THE MACHINE FOR THE FIRST TIME When using the machine for the fi rst time, the following activities need to happen: 1) You need to prime the circuit. 2) The machine will perform an automatic rinse/self-cleaning cycle. 3) You need to initiate a manual rinse cycle. Circuit Priming D
ページ11に含まれる内容の要旨
ENGLISH 9 9 2 Press the “ ” button to start the cycle. The machine starts the auto- matic priming of the circuit by dispensing some water through the steam wand. 3 The bar under the icon shows the operation progress. When the pro- cess is completed, the machine stops dispensing automatically. 4 Then the control panel shows the machine warm-up icon. Automatic Rinse/Self-Cleaning Cycle When warm-up is complete, the machine automatically performs a rinse/ self-cleaning cycle of the internal circu
ページ12に含まれる内容の要旨
10 ENGLISH Manual Rinse Cycle During this process you activate the coff ee brewing cycle and fresh water fl ows through the water circuit. This takes a few minutes. 1 Place a container under the dispensing spout. 2 Check that the machine shows this display. Select the pre-ground coff ee brewing function by pressing the “ ” 3 button. The machine shows this display. Note: Do not add pre-ground coff ee to the compartment. Check that the selection lever is set to “ESPRESSO”. Press the “ ” bu
ページ13に含まれる内容の要旨
ENGLISH 11 11 7 Press the “ ” button. The machine shows this display. 8 Press the “ ” button to start dispensing hot water. 9 Dispense water until the no water icon appears. Note: You can interrupt the manual rinsing by pressing the “ ”button. To restart press the “ ” button and then the “ ” button. 10 Fill the water tank again up to the MAX level. Now the machine is ready for coff ee brewing. The display to the left will be shown. Note: When the machine has not been operated for at le
ページ14に含まれる内容の要旨
12 ENGLISH Measuring and Programming Water Hardness Water hardness measuring is very important in order to defi ne the descal- ing frequency and to install the “INTENZA+” water fi lter (for more detail on the water fi lter, see next chapter). To measure the water hardness follow the steps below: 1 Immerse the water hardness test strip (supplied with the machine) in water for 1 second. Note: The test strip can only be used for one single measurement. 2 Wait for one minute. 3 Check how many s
ページ15に含まれる内容の要旨
ENGLISH 13 13 5 Press the “ ” button to increase the value or the “ ” button to de- crease the value. 6 Press the “ ” button to confi rm the setting. 7 Press the “ ” button to exit the programming MENU. The machine shows this display and is ready to brew. “INTENZA+” Water Filter Installation We recommend that you install the “INTENZA+” water fi lter as this prevents limescale build-up in your machine and preserves a more intense aroma of your coff ee. The “INTENZA+” water fi lter can be purch
ページ16に含まれる内容の要旨
14 ENGLISH 3 Set the “INTENZA+” water fi lter according to the measurements per- formed (see previous chapter) and indicated on the base of the fi lter: A = soft water – equals 1 or 2 on the test strip B = hard water (standard) – equals 3 on the test strip C = very hard water – equals 4 on the test strip 4 Put the “INTENZA+” water fi lter into the empty water tank. Press it down until it cannot move any further. 5 Fill the water tank with fresh water and reinsert it into the machine. 6 Dispen
ページ17に含まれる内容の要旨
ENGLISH 15 15 Replacing the “INTENZA+” Water Filter When the “INTENZA+” water fi lter needs to be replaced with a new one, the following icon is displayed. 1 Replace the “INTENZA+” water fi lter as described in the previous chap- ter. 2 Press the “ ” button and scroll the pages by pressing the “ ” button until the following icon is displayed. 3 Select the “RESET” option. Press the " " button to confi rm. 4 To exit, press the “ ” button. The machine shows this display and is ready to brew. Th
ページ18に含まれる内容の要旨
16 ENGLISH ADJUSTMENTS The machine allows for certain adjustments so that you can brew the best tasting coff ee possible. Saeco Adapting System Coff ee is a natural product and its characteristics may change according to its origin, blend and roast. The machine is equipped with a self-adjusting system that allows the use of all types of coff ee beans available on the market except for fl avored coff ee beans. The machine automatically adjusts itself after brewing several cups of coff ee to
ページ19に含まれる内容の要旨
ENGLISH 17 17 1 Press and turn the grinder adjustment knob below the coff ee bean hopper one notch at a time. Use the coff ee grinder adjustment key provided with the machine.’You will taste the diff erence after brewing 2-3 cups of coff ee. 2 The reference marks inside the coff ee bean hopper indicate the grind setting. There are 5 diff erent grind settings to choose from position 1 for coarse grind - milder taste to position 2 for fi ne grind - stronger taste 2 1 Adjusting the Aroma (Bev
ページ20に含まれる内容の要旨
18 ENGLISH Adjusting the Dispensing Spout The height of the dispensing spout can be adjusted to better fi t the dimensions of the cups that you wish to use. The lower part of the dispens- ing spout can be removed to allow a tumbler to be used. Move the dispensing spout up or down with your fi ngers to adjust its height as shown in the image. The recommended positions are: For the use of small cups; For the use of large cups. Two cups can also be placed under the dispensing spout to brew two cup
