ページ1に含まれる内容の要旨
*
47160 rev3_Layout 1 02/09/2011 13:57 Page 1
CM47160 MUK Rev 3
Upon registration with Morphy Richards
(UK & ROI only)
Espresso and Filter Combination
47160
For competitions, product hints and tips
www.facebook.com/morphyrichardsuk
and more join us at
www.homeofthehouseproud.com www.twitter.com/loveyourmorphy
* Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)
ページ2に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 2 Product overview 17 17 18 18 19 19 21 21 20 20 11 22 33 12 12 44 55 22 22 66 13 13 13 77 23 23 88 14 14 14 14 14 99 10 10 11 11 15 15 24 24 25 25 2 28 28 27 27 15 15 16 16 26 26 Features (1) Steam Control (10) On/Off Switch (19) Filter Holder (2) Steam Wand (11) Drip Tray (20) Filter Coffee Water Gauge (3) Espresso Brewing Head (12) Filter Coffee Anti Drip (21) Permanent Mesh Filter Valve (4) Filter Coffee Indicator (22) Jug Lid (13) Espresso W
ページ3に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 3 Making espresso coffee 11 2 Fill the Espresso Water Tank (13) and place into Ensure the On/Off Switch (10) and Steam Control the coffee maker. (1) are set to Off. Select Coffee (8). 33 4 Place the relevant Filter (26) or (27) into the Plug the coffee maker into the mains. Espresso Filter Holder (24). Fill with espresso coffee and tamp with Tamping Spoon (28), or use an E.S.E. pod. 55 6 Insert the Espresso Filter Holder into the Brewing Slide the
ページ4に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 4 Making filter coffee 22 1 Press down on the Lid (17) to release the catch Fill the Water Tank (18) with water. Do not and open the Lid. exceed the Max line on the Water Gauge (20). 3 4 Fill the Permanent Mesh Filter (21) with filter Place the Permanent Mesh Filter into the Filter coffee grinds. Use 7g (or one level Tamping Holder (19). Ensure the Filter Holder is placed Spoon (28),) of coffee per cup. correctly into the main unit and clicks into p
ページ5に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 5 Using the Steam Wand to froth milk 2 11 Fill the Water Tank (13) and place into the Ensure the On/Off Switch (10) and Steam coffee maker. Control (1) are set to Off. Select Steam (8). 33 4 Plug the coffee maker into the mains. Slide the On/Off Switch (10) to On. The Espresso Temperature Indicator Light (9) will stop flashing when the coffee maker is ready. 5 6 Place the Steam Wand (2)10mm deep into a When done, Turn the Steam Control to Off jug
ページ6に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 6 Using the Steam Wand to dispense hot water 4 Slide the On/Off Switch (10) to On. The Follow steps 1,2,3 of ‘Making espresso coffee’ Espresso Temperature Indicator Light (9) will on Page 3. Then refer to the following. stop flashing when the coffee maker is ready. 5 6 Place an empty mug under the Steam Wand When done, turn the Steam Control to Off (2). Turn the Steam Control (1) to Steam. BEFORE removing the mug from underneath the Steam Wand. You
ページ7に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 7 Adjusting the height of the Temperature Indicator light Drip Tray The Temperature Indicator Light (9) flashes slowly when the boiler is heating, this is normal. You can adjust the height of the Drip Tray to reduce splashing when dispensing coffee into The Temperature Indicator Light will flash fast and smaller cups such as espresso cups. the coffee maker will not work when there is a problem. If this occurs check; � The water tank is full and c
ページ8に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 8 6 the Filter Holder clean we recommend you Place an empty container under the Brewing periodically run the machine with the Espresso Head (3) to gather the descaled hot boiled water. Filter Holder in place, without coffee, using water 7 Connect the appliance to the mains supply. only. 8 Slide the On/Off button (10) and wait for the Rinse the Filter Water Tank occasionally with cold Indicator Light (9) to stop flashing. water. Do not use a cloth as
ページ9に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 9 Troubleshooting Espresso coffee Problem Reason Solution � Water is dispensing from the � Steam Control is open � Rotate the Steam Control so Steam Wand its closed � The coffee temperature is too � Heater block is not hot enough � Before dispensing Coffee, cold before dispensing make sure the ready light is illuminated � The coffee grinds are wet after � Coffee is not compact enough � Tamp the coffee before use inserting � Espresso is weak � Wrong
ページ10に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 10 Notes 10
ページ11に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 11 � Do not use the coffee maker for anything other than its intended purpose. Health and Safety Mains cable The use of any electrical appliance requires the following � The mains cable should reach without straining from the common sense safety rules. socket. Primarily there is danger of injury or death and secondly � Do not let the mains cable hang over the edge of a the danger of damage to the appliance. These are worktop where a child could reac
ページ12に含まれる内容の要旨
47160 rev3_Layout 1 02/09/2011 13:57 Page 12 CM47160 MUK Rev 3 09/11 Registering your 2 year Exclusions guarantee Morphy Richards shall not be liable to replace or repair the Your standard one year guarantee is extended for an goods under the terms of the guarantee where: additional 12 months when you register the product within 1 The fault has been caused or is attributable to accidental 28 days of purchase with Morphy Richards. If you do not use, misuse, negligent use or used contrary to
