ページ1に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 1
Breeze iron steam/spray/shot
Please read and keep these instructions
getting the best from
your new iron...
• Safety first
Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before
cleaning or storing.
• Jet cleaning (certain models only)
Your iron will give the best ironing results and will last longer if you
apply jet cleaning after each period of ironing.
www.morphyrichards.com
ページ2に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 2 • Do not allow the cord to touch hot Important safety surfaces. Let the iron cool completely before putting away. Loop cord loosely instructions around the iron before storing. The use of any electrical appliance Other safety considerations requires the following common sense safety • Use the iron only for its intended use. rules. • To protect against the risk of electric Primarily there is danger of injury or shock do not put the appliance in water death and
ページ3に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 3 • When ironing is complete, remove the Electrical plug from the socket, empty any remaining water from the tank, and allow requirements to cool before storage. • If you drop or severely knock your iron this could cause internal damage even if Check that the voltage on the rating the outside appears alright. Have it plate of your appliance corresponds with checked by a qualified electrician. your house electricity supply which must be • It is recommended that
ページ4に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 4 Components of your Filling iron 1 Make sure that the iron is not plugged in and then set the steam control ⁄ to the ‘ ’ position before filling the iron with € water. 2 Lift up the fill cap and fill with water through the filling hole › using the 1 beaker provided. A 1 / beakers fills the 2 ‹ tank (230 ml). After filling replace the fill ⁄ ‚ cap. In hard water areas the use of › distilled or demineralised water is recommended. Never use battery topping up flui
ページ5に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 5 This is perfectly normal as it shows that C the iron is maintaining the heat setting you have chosen. Steam No steam It is always a good idea to begin with cool fabrics and work up to higher settings. An iron heats up quicker than it cools down so you’ll save time and electricity. The steam facility should only be used on garments which are suitable for ironing at 2 and 3 dot setting. Features of your iron Shot of steam (certain models only) Press the shot of
ページ6に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 6 Vertical steam (certain models only) Maintenance Hold the iron in a vertical position between 1cm and 2cm away from the item D. Press the shot of steam button ‹, this Jet cleaning (certain models only) will create vertical steam. This feature is Your iron has a built in cleaning system especially useful for removing creases from designed to keep the water valve, steam hanging clothes, chamber and steam vents clear of lint and D curtains, wall hangings loose mi
ページ7に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 7 Helpline If you have any difficulty with your appliance, do not hesitate to call us. We are more likely able to help than the store from where you bought it. Please have the following information ready to enable our staff to deal with your query quickly. • Name of the product • Model number as shown on the underside of the appliance. For electrical products sold within the European Community. At the end of the electrical products useful life it should not be
ページ8に含まれる内容の要旨
40310 Rev 2 24/8/07 15:08 Page 8 Your two year guarantee To qualify for the 2 year guarantee the appliance must have been used according to It is important to retain the retailers the manufacturers instructions. For example receipt as proof of purchase. Staple your irons should have been regularly maintained. receipt to this back cover for future reference. Please quote the following information if EXCLUSIONS the product develops a fault. These numbers Morphy Richards shall not be liable to c