ページ1に含まれる内容の要旨
KDC-X491
KDC-MP435U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below.
ページ2に含まれる内容の要旨
Contents Safety precautions 3 HD Radio control features 20 About HD Radio Notes 4 Tuning General features 7 Menu system 21 Power Menu System Selecting the Source Activating Security Code Volume Deactivating Security Code Attenuator Touch Sensor Tone Audio Control Manual Clock Adjustment Adjusting the detail of Audio Control DSI (Disabled System Indicator) Audio Setup Display Illumination Control Speaker Setting Dimmer Subwoofer Output Dual Zone System Setting Switching Display Supreme Setting Th
ページ3に含まれる内容の要旨
Safety precautions Do Not Load 3-in. CDs in the CD slot 2WARNING If you try to load a 3 in. CD with its adapter into the To prevent injury or fire, take the following unit, the adapter might separate from the CD and precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside About CD players/disc changers connected the unit. to this unit • Do not watch or fix your eyes on the unit’s display Kenwood disc changers
ページ4に含まれる内容の要旨
Notes • If you experience problems during installation, Cleaning the Unit consult your Kenwood dealer. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. • When you purchase optional accessories, check with If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they work a cloth moistened with neutral cleaner, then wipe it with your model and in your area. again with a clean soft dry cloth. • We recomme
ページ5に含まれる内容の要旨
About Audio file About USB device • Playable Audio file • Install the USB device in the place where it will not prevent you from driving your vehicle properly. AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav) • You cannot connect a USB device via a USB hub. • Playable disc media • Take backups of the audio files used with this unit. The files can be erased depending on the operating CD-R/RW/ROM conditions of the USB device. • Playable disc file format We shall have no compensation for
ページ6に含まれる内容の要旨
Notes Handling CDs 2CAUTION • Do not touch the recording surface of the CD. Use of controls or adjustments or performance of procedures other than those specified herein may • Do not stick tape etc. on the CD, or use a CD with result in hazardous radiation exposure. tape stuck on it. In compliance with Federal Regulations, following • Do not use disc type accessories. are reproductions of labels on, or inside the product • Clean from the center of the disc and move relating to laser produ
ページ7に含まれる内容の要旨
General features Release button VOL/Control knob LOUD indicator Clock display ATT indicator • USB (iPod) source is recognized as CD source on the Power connected unit. Turning ON the Power Press the [SRC] button. Turning OFF the Power Volume Press the [SRC] button for at least 1 second. Increasing Volume Turn the [VOL] knob clockwise. Selecting the Source Decreasing Volume Turn the [VOL] knob counterclockwise. Press the [SRC] button. Source required Display Satellite radio (Optional accessor
ページ8に含まれる内容の要旨
General features Function of KDC-X491 Audio Control Adjusting the detail of Audio Control 1 Select the source to adjust Among the Basic Audio items, you can adjust the Bass Press the [SRC] button. level, Middle level, and Treble level in detail. 2 Enter Audio Control mode 1 Select the Basic Audio item Press the [VOL] knob. Select the desired item to be set in detail from 3 Select the Basic Audio item to adjust followings; Press the [VOL] knob. • Bass level Each time you press the knob, the it
ページ9に含まれる内容の要旨
Audio Setup Speaker Setting Setting the Sound system, such as Cross over Fine-tuning so that the System Q value is optimal Network. when setting the speaker type. 1 Select the source to adjust 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item to adjust Press the [VOL] knob. 3 Select the Speaker type Each
ページ10に含まれる内容の要旨
General features In Satellite radio source Switching Display Information Display Changing the information displayed. Channel name "CH NAME" 1 Enter Switching Display mode Music title "SONG" Press the [DISP] button for at least 1 second. Artist name "ARTIST" "DISP SEL" is displayed. Composer name "COMPOSER" Category name "CATEGORY" 2 Select the Display item Label name "LABEL" Push the Control knob towards right or left. Comment "COMMENT" In Tuner source Band & Channel number "CH NUM" Clock "CLOC
ページ11に含まれる内容の要旨
Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and taken The audio system automatically mutes when a call with you, helping to deter theft. comes in. Removing the Faceplate When a call comes in Press the Release button. "CALL" is displayed. The faceplate unlocks, allowing you to detach it. The audio system pauses. ¤ Listening to the audio during a call • The faceplate is a precision piece of equipment and can Press the [SRC] button. be damaged by shocks or jolts.
ページ12に含まれる内容の要旨
Tuner features Control knob ST indicator Band display Frequency display Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning mode Press the [SRC] button. alternates between the modes shown in the table Select the "TUNER" display. below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1" Automatic search fo
ページ13に含まれる内容の要旨
Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is displayed. "– – – –" is displa
ページ14に含まれる内容の要旨
CD/USB device/Audio file/External disc control features Control knob Disc number IN indicator Track number Play time Playing CD & Audio file Playing USB (iPod) Device When a disc is inserted When the USB device is not connected Press the [SRC] button. Connect the USB device Select the "CD" display. Playback of the file contained in the USB device ⁄ starts. • When a CD is inserted, the "IN" indicator is ON. When the USB device is connected Pause and play Select USB source Press the [
ページ15に含まれる内容の要旨
• When the iPod is connected to this unit, “KENWOOD” or Playing External Disc “✓” is displayed on the iPod to indicate that you cannot Playing discs set in the optional accessory disc operate the iPod. • When the USB device is connected to this unit, it can be player connected to this unit. charged up provided that this unit is powered. Press the [SRC] button. • When the Multi Card Reader is used, refer to (page 15). Display ex
ページ16に含まれる内容の要旨
CD/USB device/Audio file/External disc control features Function of disc changers with remote control Music Search Direct Disc Search Switching between music contained in the disc or folder being played now. Doing Disc Search by entering the disc number. Push the Control knob towards [4] or [¢]. 1 Enter the disc number Press the number buttons on the remote control. Function of disc changer/ Audio file 2 Do Disc Search Disc Search/Folder/Album Search Press the [+] or [–] button. Switching betw
ページ17に含まれる内容の要旨
Function of Audio file Scan Play All Random Play Playing the first part of each music on the disc or Audio file folder you are listening to and searching Playing randomly from all of the Audio files for the music you want to hear. recorded in the media. Press the [A.RDM] button for at least 1 second. 1 Start Scan Play When the random mode is ON, "ALL RDM" is Press the [SCAN] button. displayed. "TRAC SCN"/"FILE SCN"/"SCAN ON" is displayed. Cancelling the All Random Play 2 Release it when the
ページ18に含まれる内容の要旨
CD/USB device/Audio file/External disc control features Function of non-iPod Function of non-iPod File Select 1 Mode File Select 2 Mode Select the target folder by tracing the hierarchical Select the target folder within the folders levels of folders. This is convenient when managing containing audio files. The folder which contains audio files by folder. playable audio files is only displayed. 1 Enter Folder Select 1 mode 1 Enter Folder Select 2 mode Press the [F.SEL] button. Press the [F.S
ページ19に含まれる内容の要旨
Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. ⁄ • When the (page 23) is set to OFF, the display may black out while scrolling. English | 19
ページ20に含まれる内容の要旨
HD Radio control features Control knob ST indicator Band display Frequency display Preset station number About HD Radio Tuning Selecting the station. • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio 1 Select HD Radio source tuner features. A portion of the setting methods Press the [SRC] button. including the Tuning Mode will change. Select the "HD RADIO" display. • With the HD Radio tuner, you can use the similar 2 Select the HD FM band f
