ページ3に含まれる内容の要旨
Wireless Configuration Windows XP If there is no Ethernet adapter available on the computer being used to configure the AirStation, a wireless configuration may be performed using a correctly installed 802.11b or 802.11g wireless adapter. To configure the AirStation via a wireless connection, establish a connection to the AirStation using the setup instructions that came with the wireless client card or adapter that you are using. Buffalo highly recommends using Windows XP Wireless Zero Config
ページ4に含まれる内容の要旨
Step Configure your computers IP address Refer to your Operating System for further instructions on how to navigate to your TCP/IP Properties. For Windows 98SE/ME - Right-click on Network Neighborhood or My Network Places and select Properties. - Select the Configuration tab, scroll down to TCP/IP and press Properties. - Click Specify an IP address - IP address = 192.168.11.2 - Subnet mask = 255.255.255.0 - Click OK to close Internet Protocol (TCP/IP) Properties. - Click OK to close Network Co
ページ5に含まれる内容の要旨
Step Configure the AirStation The User name and password field will open. Enter “root” as the User name and leave the password field blank. Click OK to enter the configuration page. From this screen,you can access the built-in Web configuration feature that will allow you to configure the AirStation for your local Area Network. Advanced configuration settings are available by clicking the advanced button. For more information about configuring and operating your 54Mbps Wireless Bridge Base St
ページ6に含まれる内容の要旨
Connect the AirStation to your existing LAN Once configuration is complete, connect the AirStation to your existing Local Area Network. Plug the provided 7ft. Ethernet cable into any one of the four 10/100M Ethernet ports on the AirStation 54Mbps Bridge Base Station and plug the other end into an Ethernet hub or switch on your Local Area Network. Once the AirStation is connected to the existing LAN, users accessing the LAN through the AirStation must configure the computer’s TCP/IP Settings to
ページ7に含まれる内容の要旨
Bridge/Repeater Mode (WDS) Simple setup configuration of the AirStation for Bridge/Repeater mode (WDS). Wireless Signals of the Buffalo Bridge Access Points must overlap in order for communication to take place. Please consult the online manual or the Buffalo Support Web Page for advanced information on WDS. Click Wireless Bridge (WDS) Enter the Wireless MAC address of the Buffalo Bridge Access Point you wish to communicate with. Click Add. Click Enable next to Wireless Bridge function. Click Se
ページ8に含まれる内容の要旨
Buffalo Technology Technical Support Buffalo Technology offers Toll-Free Technical Support 24 hours a day, 7 days a week for this product. Customers in the United States and Canada can obtain technical support using the following information: ◗ Online Help Available on the AirNavigator CD enclosed with your purchase. ◗ Web www.buffalotech.com/wireless ◗ E-mail info@buffalotech.com ◗ T elephone 866-752-6210 (USA & Canada only) The constantly evolving state of wireless products and operating sys
ページ1に含まれる内容の要旨
®
Quick Setup Guide
54Mbps Wireless Bridge Base Station-g
WLA-G54
Preparation
This Quick Setup Guide will guide you
through quickly and easily installing this
product on your Windows PC. For detailed
setup and configuration instructions, please
refer to the User Manual on the Utility CD
or the Buffalo Wireless Support website.
Package Contents:
◗ 54Mbps Bridge Base Station
◗ Utility CD-ROM
◗ Quick Setup Guides
◗ AC Adapter
◗ 7ft. Ethernet Cable
There are 2 methods of configuring your
◗ Warrant
ページ2に含まれる内容の要旨
Deciding on a Mode for Initial AirStation Configuration Wired Connection (recommended) Wireless Connection Do not connect the AirStation to your existing network until configuration of the AirStation is complete! Step Connect your computer to the AirStation Wired Configuration Buffalo recommends using a wired connection, meaning your computer is physically connected to the AirStation with a CAT5 cable plugged into any one of the four 10/100M Ethernet LAN port. This type of setup wi